Uaike U-007 Multi-Function Blackhead Remover Vacuum Cleaner User Manual

Uaike U-007 Multi-Function Blackhead Remover Vacuum Cleaner User Manual

U-007

Please Read This Manual Carefully Before Using This Product .

Attention before using

1. Charging & ow power: three grids of electric power display, if only one grid of electric power needs to be charged, the icon of electric power keeps flashing during the charging process, the full three grids of electric power long bright, charging for about 2 hours.
2. If you do not operate the button, it will shut down automatically for 5 minutes. Check the charger cord for damage before use.

Product Specifications

Function Specifications

Remove blackheads and acne
Vacuum suction technology is adopted to reduce the internal air  pressure of the suction head and absorb black heads, white heads and grease in the skin, so as to achieve the beauty effect of removing blackheads, acne, grease and other dirt.

Ice compress

Ice compress minimum to 17°C, pore contraction, prevent dust re-invasion

Hot compress

Warm 38-460C to open the pores, so that the skin gets stretched, it is easier to suck out the deep dirt in the pores.

Vibration massage

5600 high-frequency vibration massages per minute, clear the self-base, enhance the ce vita ity, promote blood circulation and metabolism, accelerate dirt discharge, accelerate  essence absorption

Positive and negative ions import and export

Positive ions
Dirt is derived, pore are cleaned, and residual dirt deep in the skin is sucked out from pores by the principle of negative ion.

Negative ions
Introduce essence, deep y nourish skin, use negative ion same repulsion principle to protect skin transporting the muscle base.

Product Description

Use the parts

Small round hole beauty suction head:
for thin, delicate skin, or normal skin.

Micro crystalline beauty suction head:
Around the eyes, rough and wrinkled skin on the face is not recommended to use, body parts such as: back, arms, etc., too thin parts are not recommended to use.

Medium hole beauty suction head:
Use in cheek, canthus, alar, mouth,face and back, elbow, body less sensitive parts.

Oval hole beauty suction head:
Use in cheek, canthus, a art mouth and other parts of the face.

Big round hole beauty suction head:
Not recommended around the eyes, can be used on the face rough and wrinkled skin or the body, elbow.

Operating Procedures

1. Boot and mode switch
Long press the “switch/mode button for three seconds to open the machine and display the current temperature of the cold and hot compress nursing surface. Press the “switch/mode” button for each short time to switch the five modes of blackhead absorbing, hot blackhead absorbing, hot compress, cold compress, positive ion and negative ion.

To prevent any injury to facial muscles and ensure this treatment  are responding,you must carry out a skin sensitivity test:

1. blackhead suction:test the device at the lowest intensity level on small , inconspicuous areas of your neck. If the tested area is red or painful after 24 hours ,do not use the device.
2. hot/cold compress: test the hot/co d compress mod on your  arms, if your skin develops any unusual symptoms after 24 hours,  please do not use it.
3. +/- ion operation and vibration : test the ion operation on your arms, if your skin develops any unusual symptoms after 24  hours, do not use it.

2. Blackhead absorption operation
After installing the beauty suction head suitable for your skin, under the blackhead absorption mode, the icon light of the blackhead absorption mode is on. Press the “mode button” to adjust the suction adjust the suction at 5 eve s, according to the use of the beauty suction head.

3. Hot compress operation
After switching to the hot compress mode, the hot compress mode icon is bright, it can adjust the corresponding temperature according surroundings. and then The surface temperature of the meta face plate gradually rise, about 30 seconds to reach the temperature When the face plate sticked lightly to your skin,your pores will open, it helps to extract your blackhead more effective.

4. Operation of cold compress:
After the switch to the cold model it can adjust the corresponding temperature according surroundings. cooling mode icon is bright, The surface temperature of the metal face panel gradually decline, 30 seconds to reach the lowest temperature, When the face p ate sticked lightly to your skin,a co d compress can ease the pain and swelling of pore after you finished treatment. This helps minimize the appearance of bruises.

Warm tip: after the hot compress is finished, wait for a few minutes for the temperature to drop to room  temperature and then switch to the co d compress mode, the refrigeration effect is better. During a cold compress, t is normal for the temperature to show an increase due to skin temperature.

Note: You need to touch the sensor bar both sides of the device at the same time with your fingers or palm, so that the vibration massage and ion operation could operate.

5. Positive ion operation:
After switching to the anion mode, the icon of the anion mode is bright, and the vibration starts with it. At this time, gently stick the face  plate against the face.

The hand holds the sensor bar to form a circuit, the vibration helps to expand the pores, the mental face p ate generates powerful positive ions, which attracts the dirt from skin and softens the structures around the dirt by exerting electrostatic pressure on them. This process helps to extract your blackhead more effective.

6. Negative ion operation
After switching to anion mode, the icon of anion mode is bright, and the vibration starts with it. At this time, gently press The face p ate against the face.

The hands holds the sensor bar to form a circuit. vibration to help pore absorption, the mental face plate generates a large quantity of negative ions could bind with the positive ion in the skin cells. This enables import nutrition from skincare deep into the skin. This helps deliver long  lasting moisturization, provides your skin a refined healthy glow.

Recommended using process

Cleaning and maintenance

1. After use, take off the beauty suction head, timely use cotton stick with alcohol or cleansing mi k and other clean beauty suction head,
2. Please replace the filter sponge from time to time, and clean the filter cover with cosmetic cotton or cotton swab;
3. After take down the used sponge,p ease make sure that the new replacement is dry and clean in case destroy the internal structure of machine.
4. Do not clean the main body of the machine with water.
5. Do not use the device more than twice a month.
6. Keep charging cab e away from heated surfaces.
7. Do not reach for a product that has fa en into water. Unplug immediately.
8. Never be left unattended when plugged in.Close supervision is necessary when it used by, on, or near children or invalids.

Warranty and After-sales Services

12 months warranty.
Including free product replacement, technique support.
If you have any questions, please contact us at

[email protected]
Thank you.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>