Zhuhai Ektouch Technology P1000 Wireless Label Printer User Manual

June 6, 2024
Zhuhai Ektouch Technology

Zhuhai Ektouch Technology logo

Zhuhai Ektouch Technology P1000 Wireless Label Printer

Zhuhai Ektouch Technology P1000 Wireless Label Printer

Product Description

Zhuhai Ektouch Technology P1000 Wireless Label
Printer-1

Power Indicator status

Operation Guidance

  1. Fully charge the battery before using the first time.To turn on the machine, press and hold the power button for3 seconds

  2. To turn on Bluetooth, search for the device on the app and .select device

Switch print ribbon
  1. Open the side cover outwards in the direction of the arrow (see above)

  2. insert the label tape cassette correctly as shown in the picture above.
    Close the cover to complete the installation.

Attention

  1. insert or pull out the charging cable gently to avoid any damages to the port.
  2. Pull out the cable after charging 1s complete.
  3. Do not charge or use the printer in high temperature, high humidity, or foggy circumstances (e.g. in a bathroom, a S’lream room or beside a fire) which may be dangerous. (NOTE: This machine is not suitable for tropical environments)
  4. Improper charging methods may cause damage.
  5. Do not touch the print head; it may hot.
  6. Be aware of the sharp blade.
  7. If the machine Is malfunctioning,the reset hole can be used to restart the machine.
Battery Warning Description

Never disassemble, strike, squeeze or put into fire;
If there is severe swelling, do not continue to use;
Do not put in a high-temperature environment Do not use if immersed in water; Be sure to replace with an appropriate type of battery. (There Is danger of explosion if you replace it with the wrong type of battery.}
Be sure to dispose of the used battery as Instructed.

FCC Caution

Changes or modifications not expressly approVEd by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Pi.I rt lS of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference In a residential lnstallation. This equipment ge11erates uses a11d can radiate radio frequency energy a11d, if not installed and used iii accordances with the inS’lructiol’lS, may cause harmful interfere rice to radio communications, However, there is no guarantee that interference will not occur In a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the intelligence by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into, an outlet on a circuit different from that to which the receiver disconnected.
  • Consult the dealer or an experienced radio/tv technician for help
    This device comes with part 15 of the FCC rules. Operation is subject to the following two conditions (l)this device may not cause harmful interference, and (2) this device must accept any interference receiVEd, including interference that may cause undesired operation.

Product Warranty Description

Thank you for choosing Print master:

  1. The free warranty period is 1 year from the date of purchase.
  2. Within 30 days from the date of receipt, the user can choose to return the item.
    Please save the warranty/maintenance card property. The warranty/maintenance card will not be replaced if lost or damaged.

Non-warranty regulations

The warranty is void under the following co11ditions:

  1. Exceeding the warranty period.

  2. Not presenting the original warranty/maintenance card.

  3. Presenting a damaged warranty/maintenance card (e.g. tom or tampered with)
    Altering product information.

  4. Damage caused by unauthorized repair, disassembling, etc.

  5. Damage caused by human error.

  6. Damage caused by natural disasters such as earthquake5, flood5, windstorms, lightning strikes, or external disasters such as fires and home collapses.

  7. Failure or damage caused by harsh conditions (oil dust, moisture, direct sunlight, etc.) or failure to use or care for as required by the instruction manual.

Warranty/Maintenance Card

Product certification

Inspector:
Date of manufacture:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals