Kisonli 902B Portable Wireless Speaker User Manual
- June 6, 2024
- Kisonli
Table of Contents
902B PORTABLE WIRELESS SPEAKER
USER MANUAL
(Read before proceeding)
- Switch on or off unit by switching the “power” button on the back of the unit to be “ON” or “OFF” position.
- The item should come with enough power be powered on. If you are having trouble on pairing or powering on it, please make sure it is fully charged.
- Use the USB charge cable connecting to the item from its micro charging socket to your computer or charger. The charging input power is 5V 500mah.
- The red light will turn off when power charging completes.
- The colorful LED light turns gradually in each mode; Long press the “M” button to turn on or turn off the light.
Music Playing:
Bluetooth Mode:
- Once power on, the item turns default into Bluetooth Mode, while there is no other connection.
- The item will automatically connect to the last Bluetooth device first. If not found, it will search a new one.
- On the Bluetooth device, switch on the Bluetooth setting and search for “902B”. For the first-time connection, select “902B” to start the connection. If necessary, enter the passcode 0000 or 1234.
- To disconnect the item from the current Bluetooth device, switch off Bluetooth from the current Bluetooth device.
- Once connected, you can listen to music from the unit wirelessly (< 33 ft.). The music streaming may be interrupted by obstacles between the device and the item, such as walls, the metallic casing that covers the device, or other devices nearby that operate in the same frequency.
- Press the “ >II ” button one time to play or pause the music; short press the “- ” or “ + ” button to skip songs; press and hold “- ” or “ + ” button to adjust the volume.
TWS Mode:
- Turn on 2pcs units and ensure they are in Bluetooth mode.
- Double click the “>II” button on one of the units, waiting for their connection with each other.
- Once the 2pcs units are connected, follow the above step the connect it with your Bluetooth-enabled devices.
- After disconnecting actively, you need to turn the machine back on and off before you can re-enter TWS pairing mode.
Aux-in Input Mode:
- Once power on, press the “M” button to change to “Aux input mode” mode, connect the item with the audio device by 3.5mm aux-in cable, then play music on your audio device; press the “>II” button one time to enter silent mode.
- Press and hold the “- ” or “ + ” button to adjust the volume.
TF card/USB drive Mode:
- Once a TF card/USB drive is inserted, the unit will turn into music play mode and plays music automatically. Press “>II” button one time to play or pause the music.
- Short press the “- ” or “ + ” button to skip songs; press and hold the “- ” or “ + ” button to adjust the volume.
FM radio mode
- Once power on, press the “M” button to change to “FM” mode.
- Insert USB charging cable as an antenna.
- Press the “>II” button one time to search and lock all possible FM channels automatically. When searching finishes, there will have no channel changing.
- Press the “- ” or “ + ” button one time to select a channel.
- Press and hold the “- ” or “ + ” button to adjust the volume.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This device generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment