SINGINGWOOD BT25 Active Bluetooth Bookshelf Speakers Instruction Manual

SINGINGWOOD BT25 Active Bluetooth Bookshelf Speakers

SUPPLIED ACCESSORIES

REAR PANEL

SIDE CONTROL PANEL

1. Treble dial
2. Bass dial
3. Volume control / Input selection
4. Power Indicator
   Blue : Bluetooth Input
   Green : Line In 1
   Red : Line In 2

REMOTE CONTROL

1. Power on/off
2. Line 1 input
3. Line 2 input
4. Play/pause (for Bluetooth only)
5. Previous track (for Bluetooth only)
6. Next track: (for Bluetooth only)
7. Bluetooth input
8. Volume deaease
9. Volume increase
10. Mute

MAKING THE CONNECTIONS

1. Connect the speakers using the included speaker connecting cable.
2. Insert the audio cable Into the audio Input 1 or
3. Connect to power source.
4. Adjust the volume control to minimum level, and switch the power on.

Remark : Every time you tum on the speaker, it will switch to the last playback mode you selected.

BLUETOOTH MODE

1. Press the volume control or press the Bluetooth button on remote control to select Bluetooth mode. The Indicator turns blue.
2. Choose the Bluetooth menu in your Bluetooth device, and from the found devices, select the “Singing Wood BT25”. If you are prompted to enter the PIN code, please enter ·oooo· (four zeros).
3. The Bluetooth is connected after successful connection.
4. Play the music from the Bluetooth device and adjust the volume/bass/treble level as desired.

LINE IN MODE

1. Press the volume control or press the “LINE IN 1/LINE IN 2′ on remote control to select Line-in mode. The indicator turns green (Line in 1) or red (Line in 2)
2. Play the music from the device and adjust the volume/bass/treble level as desired.

SPECIFICATION

• Power supply: 100-240V 18V/3AAC to DC power adapter
• Total output power: RMS 25W x 2
• Speaker units:
• Woofer: 4″ (116mm)
• Tweeter: 0.75″ (19mm)
• Frequency Response: 66Hz – 20KHz
• Dimensions (W x D x H): 133 x 178 x 226mm
• Weight: 4.20kgs

USER SAFETY GUIDE

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To prevent fire or shock hazards, do not expose this appliance ID rain or moisture.

These markings are located on the bottom, elde, or back of the unit.

CAUTION: To prevent the risk of electric shock, do not real-time cover (or back). Non- user-serviceable parts inside. Refer servicing ID a service professional.

• The lightning flash with an arrowhead symbol, within an equilateral triangle, la Intended to alert the users to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shook to a pe111on.
• The exclamation point within an equilateral triangle la intended to alert the user to the presence of important operating, maintenance and servicing instructions in the literature accompanying the appliance.

Dripping warning: This product shall not be exposed to any dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on or near the product.

Ventilation warning: The normal ventilation of the product shall not be impeded far intended use.(Minimum distances must be kept around the apparatus for sufficient ventilation, especially while use of the apparatus is in topical and/or moderate climates.)

INSTRUCT1ONS ON ENVIRONMENT PROTECTION

Do not dispose of this product In the usual household garbage at the end of its life cycle;
Mng It to a collection point for the recycling of
electrical and electronic appliances. This symbol –
on the product means the instructions for uae or the packing will perform about the methods for dlsp088I. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or other forms of re-uUllzatlon of old appliances, you make an important contribution to protect the environment Please inquire at your local community admlnlstraUon for the authorized disposal location.

IMPORTANT SAFETY PRECAUT10NS

1. READ INSlRUCTlONS .All safety and operating instrudions should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained in a secure place for Mure refanlnoe.
3. HEED WARNINGS -All warnings on the appliance and in the operating instructions should be observed.
4. FOLLOW INSTRUCTIONS • All operating and use instructions should be follOW8d.
5. WATER AND MOl81URE – The appliance should not be uaed near water. For example: near a bathtub, kitchen sink, laundry tub, and swimming pool or even in a wet basement
6. VENTILATION· The appliance should be situated ao that Ila’s location and position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings; or, be placed in a built◄n installation,such as a bookcase or cabinet that may Impede the flaw of air through the ventilation openings.
7. HEAT – The appliance should be situated away from heat sources such as radlato111, heat reglate111, s!Dwolla, or other appliances 0ncluding amplifiers) that produce heal
8. POWER SOURCES – The appliance should be connected toa power supply only of the type described In the operating instructions or as marked on the appliance.
9. GROUNDING AND POLARIZATION – Precautions should be taken to ensure that the grounding or polarization of the appliance is correct.
10. CLEANING – The appliance should be cleaned only as commanded by the manufacturer.
11. NONUSE PERIODS · The pa. var cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for an extended period of time.
12. OBJECT and LIQUID ENTRY· Care should be taken so that objects do not fall and liquids are not spilled into the device’s

FCC Caution

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

BASIC WARRANTY STATEMENT

We warrant the product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use for ONE Year from date of the original purchase. We agree, at our option, under the warranty period, to replace the product if it is determined to be defective at no charge. This limited warranty does not cover any loss or damages that occur as a result of:

• Cosmetic damage.
• Shipping or improper installation or maintenance.
• Misuse.
• Neglect.
• Any cause other than ordinary commercial or industrial application.
• Adjustment by non-authorized source or any of the products firmware or hardware that you or any third party have modified or altered
• Improper environment
• Excessive or inadequate heating or air conditioning or electrical power failures, surges, connection to improper voltage supply or settings or othe irregularities.
• Accidents, acts of God.
  In Canada & the United States, please contact your dealer or our customer service at email: sales@singingwood-audio.com
  Please note that in order to have your merchandise repaired and replaced by warranty, you must contact our customer service representatives by phone or email, and get RMA number
  To obtain factory service, the original purchaser MUST present the following:

1. A sales receipt/proof of purchase indicating date of purchase.
2. Your Name, Place of Purchase, Address, Unitodel, and Description of Problem.
3. Send the unit pre-paid to the address below in the original packaging or a reasonable substitute to prevent damage. No return ill be shipped back to a PO BOX.
4. All of the accessories that came with the product package must be sent along with the main unit.
5. Please include your check or money order in the amount of $15.00, payable to SGM Direct, to cover handling and return shipping charges. We will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any or all of the necessary information. Send all inquiries or return to:

http://www.singingwood-audio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>