JSD BT-01 Bluetooth Sports Headset Instructions
- June 6, 2024
- JSD
Table of Contents
JSD BT-01 Bluetooth Sports Headset
Bluetooth Sports headset BT‐01
Notes
- Please use and store the device far away acidic, alkaline and cuspidal things
- Please keep the device dry
- Please keep the device clean and put desiccant in it after using
- Please put out the earphone before washing
- . Please do not disassemble, amend or alter device alone
- . Please do not throw or drop
Function specification
Plug USB port of micro into earphone, then connect the USB port of USB cable into computer, at the time the LED light will turn red ,when the LED light is off, it means the speaker is fully charged, please pull out the cable.
ON
Press the ” »I” 3 seconds, the device is open once BLUE “LED flash,
OFF
Press the ” »l” 3 seconds, again, the device is close while the LED off.
Wireless broadcasting via the device
Paining & Connecting
Press “power”5 secends try to seek the Bluetooth name of “BT‐03S” for puiring
while Red and Blue slow flashing in alternative set‐in the password of”0000″if
it’s the first to pair the device the Blue LED slowly flashing seems pairing
success full
-
Automatically re‐pair
Your Device can be automatically re‐pair promptly ouce both Devices not cancel the pairing. -
Automatically search
The device can Automatically search when it disconnect to phone or computer -
Broadcasting/Pause
Once the receiving is broad casting, Press button” HI “, pause the song; press it again to continue the song -
upper song:
Next song: press”+ ‘one time for next song -
Decrease the sound :
continue to press “‐”to decrease the sound. -
Increase the sound:
continue to press “+”to increase the sound.press “‐”one time for upper song
Phone answer
- answering phone up: press ” »II ” one time to pick the phone up.
- Re‐dial phone: Press ” »I “two times to re‐dial the latest phone number directly. Power save mode
- The device will be off automatically after 3 minutes no working device pairing it. Charging
- When charging,the LED slowly flashes red. Finish charging, the Flash off.
SPECIFICATIONS
- Bluetooth : V5.0
- Frequency : 402GHz‐2480GHz
- Transmission distance: 10M or so
- Transmission distance of MIC: <1 M\
- Li‐ion Battery: 3.7V/180mA
- .Charging time: 2 HRS
- . Stand-by time : 180Hrs or so
- Continuous working time : about 12Hrs 9. Bluetooth name: BT‐03S
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. -
Consult the dealer or an experienced radio/TV technician for help
-
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>