TKNEW SV10B Professional Conference Speakerphone With 4 Microphones User Manual

TKNEW SV10B Professional Conference Speakerphone With 4 Microphones

Speakerphone

Speakerphone fix up the insufficient for those products that can only connect to other communication terminals via USB cable, it added Bluetooth connection function. It can be connected with mobile phones and other communication terminals via Bluetooth, it has a good echo cancellation function. The best distance of microphone collection is 3 meters, suitable for small professional conference rooms within 15 square meters and personal offices. At the same time, the speakerphone is also suitable for remote interactive teaching and students’ online assignments. The speakerphone can be connected to the PC for unobstructed full-duplex voice calls, adaptive microphone sampling rate of 16KHz automatically adapted to the different voice bandwidths of audio and video products or systems. Its sound quality is clear. It can support the video device, VoIP, UC unified communications and instant communication software, achieve convenient Internet collaborative office, and improve the efficiency of meeting and working. The speakerphone is an economical conference system audio configuration. Speakerphone products are exquisite and small, it is so easy to carry that suitable for private travel too.

Parts List

Speakerphone

Optional Accessories

Speakerphone Overview

1. Answer/End call Bluetooth
2. Volume down
3. Volume up
4. Microphone mute
5. Microphone status indicator
6. Volume status indicator
7. Speaker mute indicator
8. Power status indicator
9. Bluetooth status indicator (Y-type indicator )
10. Headset port
11. USB port
12. Power switch

Speakerphone Keypad

LED Indicator

Wireless status indicator (Y-type indicator )| Green light flashing| Bluetooth pairing state
---|---|---
Green light on| Bluetooth connected
Microphone status indicator| Red light on| Microphone mute
Green light on| Microphone working normally

Volume status indicator

| ****

Green light on

| ****

The brightness of status LED will increase or decrease with the speaker volume up or down.

Speaker mute indicator| Red light on| Speaker mute status

Power status indicator

| Red light on| Low battery, must be recharged
Green light on| Charging
Green light off| The battery is fully

Turning the Power On and Off
Press and hold the power button ” ” for three seconds or more to turn the power on. Press and hold again for three seconds or more to turn off the power. In addition, when the USB port of the host is connected to the computer or external audio and video terminals, the host will turn on automatically.

Note : When not charging, if there is no operation for 3 minutes or more, the power turns off automatically(automatic power-off function).

Connect on Steps for USB

Connecting the PC/ video system to the Speakerphone’s USB port with a USB cable. It will takes a few seconds to install the driver automatically for the first setup.

Note: Right-click the microphone icon at the bottom right of the PC screen and click “sound” to display the “sound” screen. Click the “Playback” and “Recording” tabs and check that “Bluetooth speakerphone” is set as the default device. If it is not set as the default device, click “Bluetooth Speakerphone” and click “Set Default”.

Connecting a headset/headphones
You can communicate using a headset/headphones by connecting a commercial headset/headphones, equipped with a 3.5mm and 3-cores audio cable to the “ port on this product.

Wireless Connection

Speakerphone connection steps:
When the Speakerphone is under normal working conditions, press ” ” to turn on Bluetooth for pairing. Then the Bluetooth status indicator (Y type indicator) will flash;

1. Insert the Bluetooth adapter into your computer or other devices. The adapter will enter pairing mode. The adapter is in flashing (flashing once every 300ms);
2. Bluetooth adapter will automatically search speakerphone Bluetooth. In about 10 seconds, the speakerphone and the adapter will establish Bluetooth Connection. After successful connection, the  Bluetooth status indicator on the speakerphone (Y type indicator) will be long-on. Adapter in Slow flash state (light flashes once a second);
3. Wireless voice calls can be made at this time.

Wireless Bluetooth Adapter Specificaon

1. USB port (for power supply and USB audio connection)
2. Adaptor LED indicator
3. Adaptor control keys

LED Status Indicator

Adaptor LED indicator

| light flashing quickly| The device searches for pairing status
---|---|---
light flashing slowly| The connection is successful

Keypad

Adaptor control keys

| Double click on the key| The device enters the paring tate
---|---|---
long press 5 seconds| Clear pair record

Bluetooth Connection

1.  Press and hold the” ” button until the Bluetooth Indicator(Y type indicator) flashes green light. The speakerphone is under Bluetooth pairing mode.
2.  Turn on the Bluetooth function of the mobile phone and click search.
3.  Search “Bluetooth speakerphone” with your Bluetooth device and connect.
4.  When the Bluetooth was set up, the Bluetooth indicator(Y type indicator) will keep lighting on. Then you can use the speakerphone for the audio call.
5.  Press the ” ” button to turn off Bluetooth.

Note: When Bluetooth fails to match within 40 seconds, Bluetooth needs to be restarted.\

Applications

The video conference software

• Support wireless can connect with a pc or video device without cable to realize wireless voice call
• Support USB communication, support video conference terminal, the multimedia communication terminal
• Support video conference software, various network conference software, UC unified communication
• Support Zoom, Huawei Cloud, Suirui, Haostong, Webex, Aver, Bizconf, Skype
• Support speaker signal output through 3.5mm interface, connect to external mixer and sound system to achieve local sound reinforcement to meet the needs of a larger venue.

Advantages

1.  Provide full-duplex hands-free phone calls for the terminal device to connect to speakerphone via the USB channel of the terminal device:
2. Video conferencing
3. Internet audio
4. VoIP audio calls
5. Bluetooth audio calls
6.  Advanced HD-Voice audio processing technologies deliver remarkably rich, full audio for natural, effortless conversations:
7. True full duplex performance allows user to listen and speak at the same time without audio cutting in and out.
8. Distributed Echo cancellation.
9. Noise cancellation.
10. Advanced automatic level management.
11.  4 inner Omni-directional microphones best collection distance of 3 meters, 360-degree range.
12.  Support Bluetooth to make a conference call with a mobile phone, and connect to a PC or video device with a Bluetooth adapter without a USB cable.
13.  Built-in chargeable battery: 2600mAh, talk time 9 hours and standby time 120 days.

Specification

1.  DSP processing technology
   Echo Cancellation Noise Suppression Automatic gain control

2.  Audio parameters
   Microphone frequency response: 100Hz-7KHz
   Spea ker frequency response: 100Hz-20KHz
   Microphone sound-pickup coverage: The best collection distance is 3 meters, a 360-degree range
   Speaker Volume: up to 80dB

3. System Requirements
   Windows,Android,iOS,Linux

4. Interface
   USB port1 Headset 3.5mm port1

5. Usage environment and specifications
   Reverberation Time: < 0.2 sec Ba ttery Capacity: 2600mAh
   Noise Degree: < -50 dBA
   Power Requirement: 5V — — — 500mA
   Storage Temperature: 0°C-70°C Humidity: 20%-85%
   Operating Temperature: 4°C-50°C (operating state)

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Product Warranty Registration Card

• Item No.:
• Date of purchase:
• User Name:
• Tell:
• Fax :
• Address:
• E-mail:
• Dealer name :
• Dealer phone :
• Zip Code:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>