Shenzhen Bebiyang Technology S37 2.1-Inch Portable Wireless Speaker User Manual

Bebiyang Technology S37 2.1-Inch Portable Wireless Speaker
User Manual

Thank you for purchasing our product S37. This device can be easily connected with audio or video devices for your daily needs. Before you use this product for the first time, please read this manual carefully to get familiar with all its functions.

Package contents

1. S37 speaker ………………………..1PC
2. User manual ………………………………1PC
3. 3.5mm Audio cable………………………………. 1PC
4. USB charge cable…………………………………… 1PC
5. Remote control……………………………………….. 1PC

Technical Specifications

• Output power:5W+3W*2
• Frequency:80Hz-18KHz
• S/N ratio:?:80db
• Output Impedance: 40
• Input voltage: DC 5V
• Battery capacity:3.7V, 2200mAh
• Speaker driver size :3 “1 woofer,2 “2 tweeter
• Product size:170 130210mm

Product Features

1. Using the newest decoding chip, Bluetooth 5.0, connect quickly.
2. 11 W output power, portable 2.1 channel design, 3 speaker drivers, outstanding surround sound.
3. Support Bluetooth,Aux-in,USB,TF card,FM radio,Recording,EQ,Remote and so on .
4. Double power supply: DC 5V-1A charging & Built-in one rechargeable lithium battery.
5. Compatible with personal computers, MP3, MP4, smartphones,s, and other smart devices.
6. Intelligently select MP3/FM station by remote number keys.
7. Can memory the song number after turn off.
8. The top of the S37 speaker has a stand holder that can support the standing of mobile phones, tablets, etc

Safety information

1. Store the loudspeaker, away from humid areas, high temperatures, oil, and other liquids.
2. Do not expose the product to direct sunlight and rain.
3. Set a suitable volume to avoid hearing impairment.
4. If you do not use the product for a long time, charge it at least once per three months in order to avoid damage to the lithium battery.
5. 1t is forbidden to disassemble, repair or open the product.
6. When charging, please keep away from the reach of children to avoid electric shock or suffocation.

FUNGSI OPERASIONAL MANUAL

FUNGSI OPERASIONAL MANUAL

1. Mode: the press is for switching UBS.TF. FM. AUX IN. BT.
2. Recording: Short press is for playing the recording file, Long press is entering the recording.
3. BT
4. Previous: When read USB/TF card. short press is for the previous song. Long press is for fast backward..when FM works, short press is for the previous channel.
5. Play/PAUSE: When reading USB/TF card. short press is for play/pause, Long press is for repeat function. when FM works, show press is for mute, long press is channel automatically.
6. NEXT: When reading USB/TF card. short press is the next song and the Long press is for fast forward..when FM works. short press is for the next channel
7. TF jack
8. USB jack
9. AUX-in
10. 0N/OFF
11. DC-5V

Bluetooth mode
Turn on the speaker and Open the hands of the Bluetooth Settings (Mobile phone brand different. Bluetooth opening method will be different), into the search, the S37 will be found, please connect it. When the Bluetooth pairing is successful, Then you can play the music on your phone. In case of unsuccessful pairing, turn off the speaker and restart it. After successfully connecting to Bluetooth, if you turn off the device, but the Bluetooth on your smartphone remains open. when you restart the device, the Bluetooth will be connected automatically. When the speaker Bluetooth is connected to the Bluetooth of your mobile phone. if you want to connect the Bluetooth of another mobile phone. you must first press and hold the button to disconnect the Bluetooth connection of your mobile phone, or you can directly disconnect your mobile phone’s Bluetooth. and then pair the Bluetooth on other mobile phones.
FM radio mode
To activate radio FM mode, turn on the S37 speaker. use the Mode button to select FM or press the FM button on the remote control. To search for available radio stations automatically. click and hold FM Stations will be saved automatically. To switch stations, click or or click the number keys on the remote control, each number key will save the corresponding FM radio station.
To start searching radio stations manually, please use the number on the remote to enter the station number you need. For example: if you want to search for the “90 . 5” radio station, you can directly press the number 905 on the remote control to go to the 90.5 radio station.
AUX/Line in mode
Turn on the S37 speaker. select AUX mode, you can use the AUX cable to connect your MP3 or computer with the speaker. and then play your music.
Play by TF card or USB flash
Turn on the S37 speaker and insert your TF card/USB flash to automatically switch to TF/USB mode, and play the music from the TF card/USB flash. After pulling out, if you re-insert the TF card/USB flash. the speaker will start playing from the previous breakpoint.
Recording mode
In TF / USB mode, you click REC to enter the recording mode, and then you must use the microphone to record. Press REC again to end the recording and play the recording. The recording will be saved on a TF card or USB flash memory.
Charging
To charge the battery, insert the Micro USB charge cable to the speaker port, then connect the USB port to a DC 5V charger, and plug the charger into an AC 220V power source. Charge the speaker the same as Charge your phone. Charging LED light indicator: It is always red when charging; When the red light turns to blue light after fully charged.
Solutions To Common Problems

Cause 2: The speaker Bluetooth is automatically connected to other devices Solution: Press’ Mode” choose Bluetooth mode, if other devices are automatically
connected, long press “ ” to disconnect Bluetooth, turn on the phone Bluetooth, and connect to “537”.
The Speaker sound is too small| Cause 1: The volume of the speaker is too low
Cause 2: The volume of the phone is too low
Solution: Please increase the speaker and phone volume.
Music playing staccato| Cause 1: The Effective distance between the speaker and the mobile phone may be more than 100 feet
Cause 2: There are obstacles between the speaker and the mobile phone
Solution: If it is the above reason, please shorten the effective distance between the speaker and the mobile phone. If not, please reconnect to Bluetooth.
Speaker doesn’t work| Cause 1: The speaker may have run out of power
Cause 2: Bluetooth is not connected
Cause 3: The volume of the speaker may not be turned on, or the volume of the mobile phone may not be turned on
Solution: Please turn on the speaker again after fully charging, reconnect Bluetooth, and increase the volume of the speaker and the phone.

Remote control

1. Mute
2. Mode: the press is for switching USB, TF, FM, AUX-IN, BT
3. BT
4. Play/Pause: When reading UBS/TF card, the short press is for play/pause, When FM works, the short press is for mute, long press is the search channel automatically.
5. NEXT: When reading UBS/TF card, the short press is the next song and the Long press is for fast forward. When FM works, short press is for the next channel.
6. Recording: the short press is for playing the recording file, and the Long press is entering the recording.
7. 0-9 number key: you can choose songs or FM programs just by pressing the number key, for example, if you want to listen to the 3rd song, just need to press the number key “3”, the LED screen will display “0003”, after 3 seconds it will play the 3rd song; if you want to list the 12th song, please press number key”1″ firstly, then press number key “2”, it will switch to 12th song, you can use a similar way to choose any song.
8. FM radio
9. Volume+
10. Previous: When reading the USB/TF card, the short press is for the previous song. Long press is for fast backward..when FM works, short press is for the previous channel.
11. Volume-
12. Cycle mode : single cycle and all cycle

Thank you again for purchasing the S37 speaker. If you have any questions, please contact us. Hope our products can get your love and recommendation. Best wishes to you! Wishing every happiness will always be with you!

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>