Shenzhen Toptool E Commerce C1001 Automatic Clamping Wireless Car Charge Instruction Manual

**Shenzhen Toptool E Commerce C1001 Automatic Clamping Wireless Car Charge Instruction Manual

**

Thank You For Using This Product’

Overview

Packing list and parameters

Product Name: Carstand wireless charger( Intelligent sensing)
Power: 10W 7 5W. 5W
Effective transmission distance: 0.10mm
Size 120mmx67mmx46mm
Charging interface : Type C

Packing list

• 1 wireless charging psd
• 1 suction cup holder
• 1 Air vent clip
• 1 Type- C cable
• 1 user manual

Instructions For Use

1. Connect the vehicle s wireless charging device to the appropriate data cable when using it
2. Connect the USB port of the data cable to the charging interface on the car (eg , cigarette lighter switching charger and USB charging port on the car )
3. Charge output voltage 5V9V
4. When the device is powered on 5V 9V DC power the Red and green indicator lights up the device 5cm 15cm After opening your arms and putting them in your phone , the device automatically grips the phone At this time , no The line charge will automatically charge the phone , and the green light will light up when charging When touched When Touch the top bump ( powercharacter ) is touched , the device automatically opens its arms .Take out your phone
5. This device has over voltage protection over-temperatureprotection magnetic field protection , short circuit protection ,if the device is abnormal , it will automatically stop working

Specifications

1. Material ‘ PC + ABS+Nylon
2. Input voltage / current : 5V / 2A 9V / 1 67A 12V /1A
3. Output power : 15W/10W /7 5W / 5 automatic identification
4. Charging power 110K-205K HZ
5. Sensing distance- 0-10mm
6. Support Specifications Qualified with QI Wireless Protocol Charging
7. Support QC wireless fastcharginq equipment ,such as iphone8 iphonex , iphone8 plus , iphonel 1 iphone1TPro , Samsung 56 , sedge , s7sedge ,S8 , S8 + S9 +
8. Devices that do not support wireless charging need to purchase Q.-compliant wireless receivers before they can be used

Precautions

1. Do not over-squeezeor hitthe device
2. Wireless charger to avoid damage to the device’s circuit When charging with metal phone case , you need to putthe metal The phone case can be removed to charge.
3. Do not connect the phone to the car wireless charging device while charging the phone Metal objects are placed and metal objects need to be removed.

Cautions

1. People who use a pacemaker should consult your doctor before you use this product. Plus please leave it at a distance of 50cm away from the place where your installed pacemaker , the electromagnetic wave can affect the normal operation of your pacemaker
2. Keep your device dry Don’ t put it into water ora ny other liquid Don’t get it wet
3. Ambienttemperature -10 °C to 60 °C
4. Don’t disassemble charger 5 The charger should stay away from magnetic objects or metal substances 6 The product and its type c input port should be protected away from dust
5. Keep out of reach of children

Warranty

This device is free from defects in material and workmanship under normal use for twelve (12 )months commencing upon the date of purchase. Proof of purchase is required for warranty service. The consumer should never attempt to open or disassemble the device , and doing so may cause damage that voids your warranty.

FCC Instructions

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 15cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>