easylogger Temperature and Humidity Measuring Device User Guide
- June 6, 2024
- easylogger
Table of Contents
Quick guide
Installation
Version 1 – straight into the fresh screed
After applying the screed, press the easy logger with your fingers into the still soft/liquid screed until the easy logger is just below the top edge of the screed (see picture).
Version 2 – belated gluing
Drill, with a 35mm drill, an approximately 18mm deep hole into the subsurface
and glue the easy logger into the borehole with filler or floor adhesive (see
picture).
In order to find the device more easily afterward, the enclosed flag can be
used. After placing the easy logger on the surface of the screen, insert the
enclosed flag into the smaller hole on the top.
Product description
The easylogger is a temperature (°C) and humidity measuring device (%RH), on
which long-term data records of these measured values are saved. The device is
positioned on the screen surface.
With the easylogger, the room climate can be measured directly on the screed
surface during the screed drying and the associated diagram can be displayed.
The data can be read out contactless via radio connection with
The data can be read out contactless via radio connection with synchronization
using a mobile phone or a PC.
The device can be read out up to five times.
App
Read out the easy logger is possible with an own APP, called “easy logger”,
which is available for Android and Apple-Smartphones in the respective store
(Apple-AppStore or Android-PlayStore).
Instructions and further information can be found in the App or on our website
(www.floorprotector.at) using the following QR
code:
https://www.floorprotector.at/easylogger
Hints
- Always store unassembled easy logger in the original packaging in a frost-proof and dry place
- Protect from direct sunlight
- Do not built-in damaged devices
- Do not open or modify the device
- Never keep next to magnetic fields
Certification information
a) User Information gem. FCC 15.21 enthalten:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
b) Part 15 Statement gem. FCC 15.19 falls das Statement nicht
b) Part 15 Statement gem. FCC 15.19 falls das Statement nicht auf dem Gerät
steht, weil dieses kleiner als eine Handfläche ist)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
c) Statement gem. RSS GEN Issue 5:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development
Canada’s license-exempt RSS(s). Operation is subject to the following two
conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
https://www.floorprotector.at/easylogger
fp floor protector GmbH
Waldgasse 2
A-2700 Wr. Neustadt
Safe from the ground up.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>