Rebel KOM0973 Comp Wireless Keyboard Owner’s Manual
- June 6, 2024
- Rebel
Table of Contents
Rebel KOM0973 Comp Wireless Keyboard
SAFETY MATTERS
Read this instruction manual carefully before use, and keep it for future
reference. The producer does not claim liability for inappropriate use and
handling.
TURN OFF THE DEVICE ON A PLANE
Wireless devices can cause interference on a plane. Please make sure that the
device is powered off in flight.
TURN OFF THE DEVICE IN THE VICINITY OF DANGEROUS GOODS
Please turn off the device nearby gas stations, fuel, chemical agents and
other hazardous materials.
TRAFFIC SAFETY
Do not use the device while driving.
TURN OFF THE DEVICE IN THE HOSPITAL
Follow any special regulations in force in any area such as hospitals and
always switch off the device whenever it is forbidden to use it or, when it
may cause interference or danger.
ACCESSORIES
- Use only authorized accessories.
- Do not use this device if it has been damaged or its operation is abnormal.
- Do not attempt to disassemble the device or repair it yourself. In case of damage contact authorized service point for check-up/repair.
CLEANING AND MAINTENANCE
- Clean it with soft, slightly damp cloth only. Do not use any chemical agents to clean the product.
- Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
CHARGING
- Insert one plug of the USB cable to the device’s microUSB port.
- Connect the other plug to the AC adapter or a compatible PC USB port.
- Charging starts automatically.
- When the device is charging, red Charging indicator is on.
- When the device is fully charged, red indicator goes off.
- Make sure to unplug the USB cable from the device when charging is finished.
Notes: Make sure to fully charge the device before first use.
OPERATION
- Open the battery cover and remove the nano receiver.
- Connect it to the USB port of the external device you want to operate with the wireless keyboard.
- Slide the Power switch at the back of the device to the ON position.
- Blue indicator flashes indicating that the keyboard is ready to establish a connection with the external device.
- When the keyboard connects with the external device, blue indicator is on. The wireless keyboard is ready to be used.
- Remember to turn off the device after use by sliding the Power switch to the OFF position. You can store the nano receiver in its slot inside the battery compartment.
AUTO SLEEP MODE
The keyboard will automatically enter sleep mode after 3 minutes of no operation (all indicators are off). The user can wake the keyboard at any time by pressing any key.
| Indicator | Indicator activity | System state |
|---|---|---|
| Solid red | Charging |
| Flashing blue| Ready to
| establish a
| connection with
| an external
| device
Solid blue| Connection
| established
| Flashes orange| Informs the user
every time you press| that the key has
the key or tap the| been pressed /
touchpad / Flashing| Low battery
orange|
KEYS COMBINATION
-
Fn + : Adjust cursor speed (3 speed levels available)
-
Fn + Turn the backlight on or off.
Press and hold Fn key and at the same time slide your finger up and down on the touchpad to change the backlight intensity -
Fn + Enter: Open the Task manager
-
Fn + Del: Delete function
-
Tap the touchpad once with a finger – left mouse button
-
Tap the touchpad once with two fingers – right mouse button
-
Drag two fingers up and down on a touchpad – scroll up and down (scroll wheel)
-
For Android: return to the main interface For Windows: open the home page in the browser
-
For Android: open the options menu For Windows: right mouse button
-
Increase volume
-
Decrease volume
-
Left mouse button
-
Right mouse button
Fn key
Press the Fn key together with the key from 1 to 0 to access function keys.
Shift key
Press the Shift key together with the key from 1 to 0 to input special characters.
TROUBLESHOOTING
| Problem | Possible reason | Possible solution |
|---|---|---|
| The device does not respond | Low battery level | Please charge the device |
| The device is not turned on | Make sure the Power switch is set to ON position |
The keyboard cannot establish a connection
to the nano receiver
| The nano receiver may not be connected properly| Disconnect and reconnect
the nano receiver
The mouse pointer moves erratically and/ or unresponsive| The device may not
be within the operational range| Bring the unit closer to the nano receiver
Low battery level| Charge the device
Dust or oil on the touchpad| Clean the touchpad with a soft, slightly damp
cloth
The device does not charge| Defective battery| Contact authorized service
point for check-up/repair
---|---|---
The device is not connected properly with the charger| Check the connections
SPECIFICATIONS
Full QWERTY keyboard layout with touchpad and mouse function
Backlight
Sleep function
Scroll function
Dedicated to: Smart TVs, TV boxes, game consoles, tablets, laptops, PCs,
smartphones
Supported OS: Windows, Windows Mobile, Android, Linux, macOS
Frequency: 2,4 GHz
Operating distance: 10 m
Battery capacity: 300 mAh
Charging: 5 V; 300 mA
Weight: 94,3 g
Dimensions: 140 x 16 x 91 mm
Inset: nano receiver, battery, USB cable, user’s manual
Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that wireless keyboard KOM0973 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.eu
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or Its literature
indicates that It should not be disposed with other household wastes at the
end of its working life. To prevent possible harm lo the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract This product should not be mixed with
other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1,
08-400 Miętne.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>