Tohnichi Mfg FHLSM Tohnichi RF Module User Manual
- June 6, 2024
- Tohnichi Mfg
Table of Contents
Tohnichi Mfg FHLSM Tohnichi RF Module User Manual
Description
The purpose of this manual is to explain correct way how to integrate module FHLSM to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and end product, where module integrated, complies with regulations in certain regions. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions.
The TOHNICHI RF MODULE, model FHLSM is installed in a portable device or in a fixed device. The usage is only for data transmission.
And the FHLSM RF MODULE has to be installed and used in accordance with the technical description/installation instructions provided by the manufacturer.
The system may only be implemented in the configuration that was authorized. Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Regulatory Information
USA-Federal Communications Commission (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Labeling
TOHNICHI RF MODULE FHLSM is labeled as below.
FCC ID: UY6-FHLSM
The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, “Contains FCC ID: UY6-FHLSM” shall be placed on the outside of final host system.
Caution: Exposure to Radio Frequency Radiation.
To comply with RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter. Operating by itself, the output power from this device is below the threshold where SAR measurements are required.
Canada-Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of this device.
IC: 6561B-FHLSM
The proposed with IC ID label format is to be placed on the module. If IC ID is not visible when the module is installed into the system, “Contains IC: 6561B-FHLSM” shall be placed on the outside of final host system.
Caution: Exposure to Radio Frequency Radiation.
To comply with RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter. Operating by itself, the output power from this device is below the threshold where SAR measurements are required.
Instructions to OEM Integrators
A User manual provided to the end user must indicate the operating requirements and conditions that must be observed to ensure compliance with the above-mentioned FCC /IC RF Exposure guideline.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>