Remote Tech RT-CY686 Remote Key User Manual
- June 5, 2024
- Remote Tech
Table of Contents
Company: Remote Tech LLC
Address: 310 ALDER RD,Dover,DE 19904,USA
Name: Remote Key
Model: RT-CY687, RT-CY686, RT-CYRC3, RT-CYRC4
Operation instructions
- After matching the key to the car, press 1 the unlock key for 2 seconds to open the door and press 2 the lock key for 2 seconds to close the door.
- The ignition key is used to manually unlock and start the car.
Product parameters
| Rated voltage | DC 3V |
|---|---|
| Working current | <12mA |
| Operating voltage | DC 3.3V-2.2V |
| Transmit power | >-8dbm |
| Key operation force | 200±50g |
| Operating temperature | -5°C +45°C |
| Stand-by current | ＜7uA |
| transmitting frequency | 433.92MHZ±75KHZ |
| Modulation | ASK |
| Battery | CR2032 |
| Key durability | More than 70,000 times |
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
instructions, that may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure condition without restriction.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may
cause undesired operation of the device.
This device complies with ISED RF radiation exposure limits set forth for an
uncontrolled environment.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>