Kkm K59 Distancing Alarm User Guide
- June 5, 2024
- KKM
Table of Contents
QUICK START GUIDE
Know the Social Distance Alarm
How it works
- Touch the button for 3 seconds, the blue LED quick flash, and the device power on
- The blue LED will slow flash to indicate the device is in working mode
- In default, the product will make a vibration/red LED to alert when another device comes too close
- If you don’t need to use it, long touch the button for 8 seconds to power off
Barry state: that the blue LED will flash every 3~5 seconds when it’s in working mode. If the blue LED stops flashing, the product is in sleep mode. Please recharge the product, or replace the battery.
Note: You can use App for more features.
For the models without a button, please follow the below steps to activate the
alert function
Use the App to achieve more features
Connect to App
STEP 1:
Scan the QR code to download in App Store or in Google Play.
https://play.google.com/store/apps/details?id=com.beacon.kbeaconset2
https://apps.apple.com/cn/app/kbeacon/id1483313365?l=en
STEP 2:
Turn on Bluetooth.
Make sure your phone’s Bluetooth is on.
STEP 3:
Place the tag close to the phone.
STEP 4:
Tap on the “scan” icon on the top right corner. Then click the device shown in
the list.
STEP 5:
Come to a product detail page and achieve more features.
*For models without buttons only
Click the “ACTIVATE” to turn on the alert function.
Features
ID Seng
Group ID: You can set the range from 0~65535, Users in the same Group
will not trigger the alarm when they are close to each other.
Serial ID: Define different members in the same Group.
Alarm Type
You can select the alert way you need.
Alarm Distance
Select the distance to meet different scenarios. The device will vibration or sound alert if the distance with another device is less than selected.
Sleep Time
Select the no-disturb period.
The device will not alert during this period.
Nearby History
View the history of when and who doesn’t respect the security distance.
Note: When you are connecting the App, the distancing alert feature is disabled. Please make sure you quit the App are you make the song.
PLEASE NOTE
The device must be worn on the body to operate effectively with the Bluetooth
signal. IF not worn correctly the social distancing alert will operate at
inconsistent intervals. Reflections of building surFaces or unknown objects
can interfere with the Bluetooth signal.
As per below, to maximize the Bluetooth signal please do not hold your
badge behind your back or cover it with your hand.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modificaons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.