Shenzhen Fanzhong Technology FZ-B15 Dual Mode Wireless Keyboard with Touchpad User Manual

Shenzhen Fanzhong Technology FZ-B15 Dual Mode Wireless Keyboard with

Touchpad

Compatible system

Win/iOS/Android/Mac

Win 2.4G Connection Instructions

1. Please turn on the power switch located above the keyboard, and the power indicator will be red for 3 seconds and then off.
2. Take out the receiver and plug it into the USB port. please make sure  available) the equipment USB interface is av your computer
3. After computer recognition, the keyboard can be used.

iOS Bluetooth Connection

•  Please turn on the power switch located above the keyboard, and the power indicator will be red for 3 seconds and then off.
•  Press and hold fn+ bluetooth 1/bluetooth 2 for about 3 seconds, the blue light flashing,and then releases your finger, the keyboard  starts searching
• Turn on the device “Bluetooth” to enter the search mode.
•  Until “Wireless keyboard” appears, click this keyboard name for pairing connection.

Touchpad Functions(iOS13.4.1)

Win 10 Bluetooth Connection

Touchpad Functions(Win10)

Android Bluetooth Connection

Touchpad Functions(Android4.0)

Device switching

Fn+:Switch to connected2.4G devices
Fn+ B1:Switch to a connected Bluetooth 1 device
Fn + 82:Switch to a connected Bluetooth 2 device

Backlight switching

Brightness: Fn + X
Colour: Fn +

Technical Specifications

Keyboard size: 326.2114. 8 12. 1 (6. 3) mm Key working current: <3mA Touchpad size: 78104 mm Standby current: <1.5mA Keyboard weight: 260g Sleep current: <50uA Working distance: 10m Sleep time: <30minutes Working voltage: 3.0-4.2v Charging current: < 1A Keyboard layout: 78+17touch keys Awaken way: Press key

LED Status

B POwer Light:

• Turn on the red light for 3 seconds and then turn it off.
• The charging red light is always on and the full light is off.
• The red light flashes when the voltage is low. Please charge it in time.

B LIght:

• When switching to Bluetooth mode, the blue light flashes quickly.
• After successful switching, the blue light flashes every 5 seconds.

A Cap Light

The indicator light is on and the capital function is on.

1 Numlock Light:

The indicator light is on , the digital function is on.

0 Mouse Light

The indicator light is on , the mouse function is on.

Troubleshooting; Please contact the after-sales service.

Copyright; It is forbidden to reproduce any part of this manual without the permission of seller.

Safety instructions: Do not open or repair this device, Do not use the device in a damp environment. Clean the device with a dry cloth.

Warranty: The device is provided with one-year limited hardware warranty from the purchase day.

Keyboard Maintenance

1. Please keep the keyboard away from liquid or humid environments, saunas, swimming pools, steam room and don’t let the keyboard get wet in the rain.
2. Please don’t expose the keyboard at too high or too low-temperature conditions.
3. Please don’t put the keyboard under sun for a long time.
4. Please don’t put keyboard close to the flame, such as cooking stoves, candles or fireplaces.
5. Avoid sharp objects scratching products, timely to recharge products to ensure the normal use.

FAQ

Q1: The receiver does not recognize?
ANS: The receiver is not inserted into the computer. Please check if the USB interface is in good contact

Q2: The tablet PC can’t connect the BT keyboard?
ANS:

•  At first check the BT keyboard is into match code state, then open the table PC Bluetooth searching.
•  Checking the BT keyboard Battery is enough, the battery low is also lead to can’t connect, you need charge.

Q3:    The keyboard indication light always flashing when use?
ANS: Keyboard indication always flashing when use, is means the keyboard will be no power please charge the power as soon as possible.

Q4 :  The table PC display BT keyboard is disconnect?
ANS: The BT keyboard will into dormant to save the battery after some time later no use; press any key the BT keyboard will be awaken and working.

FCC RULES

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference,
• This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

WARRANT  CARD

Documents / Resources

| Shenzhen Fanzhong Technology FZ-B15 Dual Mode Wireless Keyboard with Touchpad [pdf] User Manual
FZ-B15, FZB15, 2A55OFZ-B15, 2A55OFZB15, FZ-B15 Dual Mode Wireless Keyboard with Touchpad, Dual Mode Wireless Keyboard with Touchpad
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>