VIKVIZ Wi-Fi Face Recognition Body Temperature Measurement System User Manual
- June 5, 2024
- VIKVIZ
Table of Contents
VIKVIZ Wi-Fi Face Recognition Body Temperature Measurement System
Product
Specification
Appearance
Application scenarios
It is suitable for office areas, hotels, access gates, office buildings, schools, shopping malls, shops, communities, public services and management projects and other places where human faces and temperature measurement access control are required.
Product Features
- Support the camera to capture the face to activate the device;
- Adopt dynamic face detection and tracking recognition algorithm based on video stream;
- Support local storage of 10,000 face libraries on the device;
- When the face database is 3000, the accuracy of 1:N recognition is 99.7% under the condition that the false recognition rate is three out of ten thousand;
- Fast recognition speed:
- Face tracking and detection take about 20ms
- Face feature extraction takes about 200ms
- Face comparison takes 0.2ms (1000 people base, multiple recognition takes the average), 0.5ms (10000 people base, multiple recognition takes the average);
- Binocular with the infrared light camera;
- Support for saving on-site photos during face recognition or stranger detection;
- Support interface docking in HTTP mode;
- Support the deployment method of public network and local area network;
- Support the comparison function of strangers’ personal certificates;
- Support human body temperature detection, support human body temperature measurement under indoor conditions;
- Support external QR code; Precautions for use: The temperature measurement environmenttemperature is between 0 degrees and 35 degrees. This product is not used as a medical device!
Product Specification Sheet
MFD Flat face recognition terminal
Product number| MFD-10S-U
Screen
| Size| 8 inch，IPS LCD screen
Brightness| 500 LU
Resolution| 800*1280 HD screen
Camera
| Resolution| 200W*200W
Number of
cameras
| 2
Type| RGB camera
Aperture| F2.0
Focal length| 4.3mm
White
balance
| Auto
Wide dynamic| Support
Vertical wide angle
| 52°
Horizontal
angle
| 29°
Core
parameter
| CPU| 4 Nuclear，1.8GHz
Device interface| Memory 2GB, storage 8GB
| Audio| 1 channel audio output（line out）
| Video| HDMI2.0 Type-A interface 1
---|---|---
Relay output| 1 relay interface
Network
Interface
| 1 RJ45 10M/100M adaptive Ethernet port，WIFI
Features
| Face
Detection
| Support detection and tracking of 5 people at the same
time
1：N Face
recognition
| Under the condition that the false recognition rate is three
out of ten thousand, the recognition accuracy rate is 99.7%
Stranger
detection
| Support
Recognition distance configuratio
n
| Support
Live
detection
| Support
UI interface configuratio
n
| Support
Remote upgrade of
equipment
| Support
Deployment
method
| Support public network and local area network use
Personal
identification
| Support(Purchase ID card reader separately)
Human body temperature
detection
| Support
Temperature
detection distance
| Within 1 meter
Temperature measurement
accuracy
| ≤ ±0.3℃
Temperature range| 30℃~42.5℃
Temperature range| Yes
The visitor’s temperature is
normal and let go
| Support
Body temperature alarm value can be
set
| Support
Mask recognize| Support
| High temperature
alarm
| Support
---|---|---
QR code
recognition
| Support
Second-generation
ID card recognition
| Support
Touch screen
function
| Touch screen
function
| Partial model support
General parameters
| Protection level| IP42，Certain dust and water resistance
Power supply| DC12V（±10%）
Operating
temperature
| -10℃～60℃
Working humidity| 10%～90 %
Power consumption| 10W MAX
Size| 27512524（mm）
Weight| ≈2kg
Size description
Interface Description
Power connector
In the tail line of the device is the power inputinterface. The detailed
description is as follows:
Signal
name
| Signal
direction
| Function description
---|---|---
12V| Uchimas
a
| 12VDC±10% DC input
GND| Negative| Power ground
The internal power input of the equipment has reverse polarity protection and surge protection.
Relay output
The alarm output is a passive relay switch output, the contact voltage
capacity is: 220V DC, 250V AC; the contact current capacity is 1 A; the power
capacity is 30W.
WG input and WG output
Wiegand input can be connected to Wiegand reading head, used for swiping card
to open the gate. Wiegand output can be used to output recognition results,
connect to other WG input devices, access control panels, etc.
Ethernet interface
The device tail line indicates that the network interface is the face device
Ethernet interface, and the user can configure the face device parameters
through the configuration tool.
USB interface
Two USB ports can be used to connect USB devices such as ID card readers.
Audio output
Can be connected to an external power amplifier to output audio.
232 serial port
Used for communication between face machine and external equipment, output
card number, ID number, and personnel ID number.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>