rapoo E9050G Multi-Mode Wireless Ultra-Slim Keyboard User Manual
- June 5, 2024
- rapoo
Table of Contents
E9050G
Multi-mode Wireless Ultra-slim Keyboard
| Fn+F1=Back button| | Fn+F7=Stop
---|---|---|---
| Fn+F2=Forward button| | Fn+F8=Previous track
| Fn+F3=Homepage| | Fn+F9=Next track
| Fn+F4=Email| | Fn+F10=VolumeFn+F11=Volume+
| Fn+F5=Multimedia player| | Fn+F12=Mute
| Fn+F6=Play / Pause| | Fn+F7=Stop
Bluetooth mode
Keyboard
-
Press and hold key combinations, Fn+1, Fn+2, or Fn+3 for at least 3 seconds to pair 3 different devices via Bluetooth. The
the keyboard is discoverable for 120 seconds. -
Complete Bluetooth pairing on your device.
Bluetooth pairing
Windows®7 and 8:
- Click the “Start” button, then select Control Panel > Add a device
- Select the RAPOO 3.0KB/RAPOO 5.0KB from the list.
- Click Next and follow any other instructions that may appear on the screen.
Windows®10:
- Click the “Start” button, then select Settings > Devices > Bluetooth.
- Select the RAPOO 3.0KB/RAPOO 5.0KB from the list.
- Click Pair and follow any other instructions that may appear on the screen.
Note: RAPOO BLE requires Win8 or later version
The product’s compatibility with Bluetooth depends on the host device and the
software version installed. Therefore, it may not be compatible in certain
situations.
Switching among paired devices
Press key combinations of the keyboard, Fn+1, Fn+2, Fn+3, and Fn+4 to switch
among paired devices.
The keyboard connects a device via a 2.4 GHz receiver. They respectively pair
3 devices via Bluetooth.
The Mouse connects a device via a 2.4 GHz receiver. They respectively pair 2
devices via Bluetooth.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
www.rapoo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>