Luxaar LEDBM3436 Moderna 34 x 36 Inch LED Mirror Instruction Manual
- June 5, 2024
- Luxaar
Table of Contents
MODEL : LEDBM3436/LED4836/LED6036/LED7036
INSTALLATION INSTRUCTIONS
Please read these instructions carefully before installation. Installation
should be carried out by a qualified electrician.
Keep the plastic corner protectors on until installation is fully completed.
Do NOT strike mirror glass with hard or pointed items.It is recommended that
the product is cleaned with a soft, dry nonabrasive cloth. Do NOT use cleaning
agents or abrasive materials on any type of finished surface. Do NOT allow
moisture to come into contact with the electrical components.
Electrical information of LED Minor
Item Code| Product
Size(inch)| Input
Voltage| Electric Power of Mirror(Watt)| Lumens| Color temperature
(Kelvin)| Life expectancy
of LED Strip(Hour)
LEDBM3436| 34″Wx36″H| 110V| 74W| 3150| 6000K| 50,000
LEDBM4836| 48″VVx36″H| 110V| 96W| 3700| 6000K| 50,000
LEDBM6036| 60’Wx36″H| 110V| 98W| 4200| 6000K| 50,000
LEDBM7036| 70″Wx36″H| 110V| 114W| 4600| 6000K| 50,000
Touch Switch Application
-
0N/OFF LED Light
When the LED Light is OFF, use a single finger to Short Touch the Switch Button, the LED Light will be turned ON, When the LED Light is ON, Short Touch the Switch Button, the LED light will be OFF. -
Dimmable function.
Simply press and hold the touch button to adjust the lighting to your desired level. -
The Switch is with memory function.
When the LED light is turned on again, the brightness of the LED light will be at the same status as it was turned off.
Installation procedure
-
Before your installation, make sure the location of the mirror is suitable, ensuring that the domestic main power supply is within reach of the electrical entry point of the mirror. The mounting bracket must be attached to the wall stud. Measure the distance A and drill holes in the marked positions by using a suitable tool.
-
Insert the wall plugs on the surface of the wall. After that, fasten the supplied screws into wall plugs. Attach the mounting bracket to the wall.
-
You must have a Junction box in the wall. Carefully connect the Hard Wire to the mirror fixture wires. Please ensure the main electrical supply has been powered off to complete installation. Wiring from light fitting: House Wire Black(Live/Hot) to Fixture Wire Black House Wire White (Neutral) to Fixture Wire White House Wire Green (Ground) to Fixture Wire Green The input voltage required is 110V
-
Hang the mirror on the bracket, peel off the protective film and clean the mirror with a soft, dry nonabrasive cloth. After that, turn on the domestic electrical main power supply for the mirror light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>