RAYOO

Reverse Backup Camera,RAAYOO L002 HD 170 Degree Wide

Specifications

• Brand : RAAYOO,
• ITEM DIMENSIONS LxWxH : 0.73 x 0.73 x 0.91 inches,
• SCREEN SIZE : 2 Inches,
• INSTALLATION TYPE : Butterfly Mount/Flush Mount,
• VOLTAGE : 12 Volts,
• REAL ANGLE OF VIEW : 170 Degrees,
• CONNECTOR TYPE : RCA

Introduction

The camera is the ideal option for looking front and back side as well. The camera allows you to look backwards with good picture quality and result. It is easy to install. There are two installation options, one is bracket mounting and flush mounting. It depends on your needs. It has switchable Rear/Front. You Can Use It as a Rear-View Backup Camera or Front/Side Camera with Customized Distance Scale Lines and Mirror/Normal Image Switchability. This is a reverse camera (mirror image) with a distance scale line by default A 170-degree wide view angle allows you to observe areas that your eyes can’t see.
Work with your head units or aftermarket LCD/TFT displays with normal RCA input only, this is Suitable for a range of vehicles like car, mini-truck, mini-van, and so on.

Loop control Design

• Backup camera RAAYOO L002 with two tiny wires/loops (White and Green color).
• If you don’t need the guidelines, simply cut the white loop.
• Cut the green loop: the mirror image (for the back view) will transform to a non-mirror image (for the front/side view) by default.
• Backward, preserve the green loop; forwards, cut the green loop

Installation

There are two types of installations:

• Flush mount installation.
• Bracket mount installation.

Flush mount installation

Bracket mount installation

How to install

• Find a suitable spot for the reverse camera to be installed.
• Connect the camera’s power wire to the reversing light, positive to the reversing light+, negative to the reversing light – or ground.
• Connect the camera’s video wire to the vehicle’s head unit. Note: Before routing the video connection, please test the backup camera. (2) If your head unit has a trigger wire A, connect it to B; otherwise, do not connect them.
• Start the vehicle with the reverse gear engaged to test the camera.

Frequently Asked Questions

• What is the procedure for resetting my rear-view camera?
  Make sure the vehicle is turned off before opening the hood. Remove the battery from your device. To drain the remaining energy, start your automobile and press the horn or turn on the headlights. Restart the vehicle. Connect the battery again.

• Is it possible for me to leave my reverse camera on all the time?
  Backup cameras may be turned on at any time; all you need is a solid product and the necessary installation expertise.

• Why is the screen on my rearview camera black?
  Another common problem with backup cameras is when the display screen displays nothing, even though there is no signal. Instead of being ineffectively connected, the most logical explanation is that the camera is not powered.

• What is the definition of a reverse trigger wire?
  Your head unit receives a signal from the reverse trigger wire indicating that the vehicle has been shifted into reverse. This connection was connected to the back of the vehicle’s head unit in the previous step. We must now connect the wire to the appropriate signal on the wiring harness of the car.

• Why hasn’t my reversing camera worked in a while?
  Your camera could be sending you this notification for a variety of reasons. If it’s a Wi-Fi camera that was previously working, it’s likely that the camera has to be reset. Check the wiring and power cords as well, as a wire or a cord may have frayed or become separated.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>