Kinstone KST102SF Android Tablet User Guide

KST102SF Android Tablet
User Guide

Precautions

Thank you for purchasing our product! This product is installed with an Android smart operating system.This user guide briefly introduces the various functionsof the product,  allowing you to operate freely and fully appreciate thevalue-added enjoyment this product brings to you. Please read this user guide carefully before using it.

1. Note that the new battery can reach its best performance only after twice or three time full charge and discharge cycles.
2. In order to prevent data loss, it is recommended that users regularly back upimportant data, especially before firmware upgrades or product repairs.
3. This product is a high-precision electronic product, please do not disassembleit by yourself.
4. Avoid strong beating, water droplets and water splashing, and collision withthis product.
5. Avoid using this product in the following environments: high temperature, lowpressure, low temperature, humidity, dust, strong magnetic field and long-termexposure to  sunlight. We recommends that you use this product in an environmentbelow 3000 meters above sea level, 0° to 35°C, and humidity of 5% to 95%.
6. Please use the batteries, chargers and accessories allowed by the manufacturer. Using any other types of accessories will violate the warranty regulations and may be dangerous.

Kindly Reminder

• The nominal battery life of this product refers to the longest battery life that can be achieved under the minimum power consumption environment. The actual battery life  may vary due to usage and environment (such as turning on WIFI, Bluetooth, screen brightness, volume) and other factors, and there are also slight differences in individual products.

• The reasons for the difference between the nominal disk capacity of this product and the actual capacity are as follows:
  1. The error caused by the calculation algorithm: the hardware manufacturer calculates according to 1MB=1000KB, while the software calculates according to 1MB=1024KB. For example, for aproduct with a nominal 8GB hardware, the capacity recognized by the software is 81000MB1000KB*1000B/1024MB/ 1024KB/1024B=7.45GB, so there will be a calculation error of 0.55GB. The larger the capacity of the product, the algorithm error The bigger it is.
  2. The Android operating system will take up part of the disk space.

• The nominal battery capacity of this product is calculated by calculating the amount of charge in the actual charging and discharging process, using third-party tools to  detect the battery capacity, due to current fluctuations, there will be large errors, so it is not used as a criterion.

Wi-Fi wireless connection

1. Click the “Settings” function to enter the setting list interface, and click to select the “Network & Internet”;
2. Slide the switch to turn on the Wi-Fi function, and the system will automatically scan the Wi-Fi hotspot signal of the accessory;
3. Select and click the Wi-Fi signal that can be connected, enter the corresponding password, and click “Connect”.

Bluetooth connection

1. Click the “Settings” function to enter the setting list interface, click to select the “Bluetooth” menu;
2. Click “Pair new device”, and the system will automatically scan the Bluetooth signal of the accessory;
3. Select and click the Bluetooth device that can be connected, and the “Bluetooth Pairing Request” pops up in the system, Click “Pair”;
4. When the other party’s device is confirmed, the connection is successful.
   ＊Only suitable for models that support this function

Display setting
Click the “Settings” function to enter the setting list interface, click to select the “Display” menu

1. Brightness level: Swipe the progress bar to adjust the screen backlight display brightness;
2. Eye comfort: Eye comfort tints your screen amber, allowing you to view and read more comfortably in a dim environment, and may help you fall asleep more easily.
3. Wallpaper: you can set the display content of the desktop wallpaper;
4. Screen timeout: You can set the time when the system is operating, and the system will automatically turn off the screen and sleep;
5. Automatic rotation: you can set to lock the current screen orientation, or automatically rotate the screen orientation according to the device orientation.
6. Font size: The size of the font displayed by the system can be set;
7. Display size: Make the items on the screen smaller or larger. Some apps on the screen may change position.

Sound settings
Click the “Settings” function to enter the setting list interface, and click to select “Sound”

1. Volume:Swipe the progress bar to adjust the volume of media, alarm and ringtone.
2. Notification volume: Swipe the progress bar to adjust the volume of notification sound.
3. Other prompt sounds: you can turn on or off the screen lock prompt and touch prompt.

Battery status display
Can’t turn on the phone, can’t charge
Click the “Settings” function to enter the setting list interface, click to select the “Battery” menu, can check battery usage;
Power display switch: Slide the switch to turn on or off the power percentage display effect.

Connect to the computer
The product of this machine can be connected to a personal computer via a USB cable to perform data copy or delete operations.

1. If the personal computer is a Windows 7 or higher operating system, the computer will automatically install the MTP driver when it is connected to the computer for the first time;
2. If the personal computer is a Windows XP operating system, before connecting for the first time, the system must install Windows

Media Player 11 to support the connection.

1. There is a small hole next to the power-on button, poke it with a toothpick or a card-taking needle, and then press the power-on button for ten seconds to start the  machine.
   Application management

2. Charge the tablet for more than 30 minutes, and then press to turn it on.
   Click the “Settings” function to enter the setting list interface, and click to select the “Apps” menu to uninstall the application, clear the default operation, clear the cache,  clear the data, force stop and other operations.

1. Third-party applications: uninstallable
2. System application: cannot be uninstalled

User
Click the “Settings” function to enter the setting list interface, click to select the “Users” menu

1. Support setting multi-user login;
2. Each user can set up exclusive personal applications and content.

Location information
Click the “Settings” function to enter the setting list interface, and click to select the “Location” menu.

1. Swipe the switch to turn on or off the positioning function;
2. Click “Mode” to select the positioning method respectively.

Security Settings
Language and input method
Click the “Settings” function to enter the setting list interface, click to select the “Security” menu.
Click the “Settings” function to enter the setting list interface, click to select “System” menu.

1. Language: the system language can be switched;
2. Input method: You can set the system default input method and set the function of each input method;

Account management
Click the “Settings” function to enter the setting list interface, and click to select the “Account” menu.

1. Add account: You can add accounts for applications in the system;
2. Manage functions such as synchronizing data for existing accounts.

Reset

1. Click the “Settings” function to enter the setting list interface, and click to select “System” menu, select “Advanced”, select “Reset options”
2. Restoring factory settings will erase all user data (programs, local data, etc.),please pay attention to backup.

Date and time
Click the “Settings” function to enter the setting list interface, and click to select the “System” menu, and select “Date and Time” menu.

1. Automatically determine the date and time: Swipe to open the function, which can realize the system automatically synchronizes the date and time when the system is  connected to the network.
   Swipe to close function, can realize manual setting of date and time;

2. Automatically determine the time zone: Swipe to open the function, which can realize the automatic synchronization of the time zone when the system is connected to the  network. Swipe to close function, can realize manual setting of time zone;

3. Use 24-hour format: Swipe to open the function, and the time can be displayed in 24-hour format.

USB OTG function

The USB OTG function can support this product and other mobile devices (U disk, mobile hard disk, mouse, keyboard, etc.) for data exchange.

1. To use the USB OTG function, the mobile device must be connected to the product through the OTG cable;
2. To use the USB OTG function, the battery power of the product must be kept above 50%; the large power of the mobile device connection should use an independent  power supply device.
   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed  and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur  in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try  to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
– 5G indoor use only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device  must accept any interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is  subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause.
For USA: The frequency stability of all transmission frequencies of U-NII-1, and U-NII-3 meets the requirements of 47 CFR FCC Part15.407(g), and the manufacturer declares  that their transmission is maintained at Band U-NII-1 and U-NII-3.
For Canada: The frequency stability of all transmission frequencies of U-NII-1 and U-NII-3 meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states  that their transmissions remain within the U-NII-1 and UNII-3 bands.
RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with the minimum separation  distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.

This EUT is compliance with SAR for general population exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures  specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body. This device and its  antenna(s)must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>