Sharpy Light LS10 Spot Light Moving Head User Manual

Spot Light
User Manual

Please read this manual carefully before operating

Warnings
Please check the package whether any damage is caused by transportation after you got the lights. If there is any damage, please do not use this fixture, and contact the dealer or manufacturer as soon as possible.

1. This product is only suitable for professional use and does not apply to security for other purposes.
2. Be cautious to prevent the impact that is caused by the device. The use of this product should pay attention to fire, heat, electric shock, ultraviolet radiation, the lamp exploding, or Shedding caused the serious or fatal injury.
3. Need to read the instructions before using energized or installation. Follow through with the operation of security methods and pay attention to the warning signs on the specification and equipment.
4. This product is only suitable for indoor use, protection class IP20.
5. Lamps should be kept dry to avoid Moisture, overheating, or a dusty environment. Shall stop working once the using environment exceeds 40℃.
6. Prevent lamps come into contact with water or any other liquid.
7. Please replace the protection screen, optical lens, and UV screen if any visible damage, i.e. function no use, crack, or gash caused.
8. Make sure the facilities and hooks can withstand at least 10 times the weight of the fixtures when hanging the devices.
9. Please make sure the hardware is strong enough and do not have any damage, or use a safety rope to increase the safety of the fixtures.
10. Please reduce the height of the hanger rod to a safe position when installing or dismantling the fixtures.
11. Avoid eye exposure to the lighted LED lamp. Do not use the fixture without a lens or protection cover.
12. Please replace the relevant component if any damage is caused.
13. Please make sure the voltage used complies with the voltage for the fixture, moreover to have overload and leakage protection. Every fixture shall earth correctly accordingly to the relevant and professional standard when installing the fixtures.

Inspection

In order to use the product securely and properly, please read the manual before using it and follow the instructions strictly to prevent personal safety trouble and product damage caused by misuse. Take care of the product, check the possibility of the product damage caused by transportation and check all the listed items are present upon receipt of the product:

Part description

|
---|---

Button description

[ MODE/ESC ] Menu selection button
[ UP ] Switch upward submenu/add value
[ DOWN ] Switch downward submenu/reduce the value
[ ENTER ] Confirming button. Preserve all set values and select functions by it, and the current interface stays

Menu Description

1. Addr (A001-A512)
   This option is for the DMX address setting. Press button “MENU” to select Addr, press button“Enter” to start setting, press button “UP” to increase the address NO., press button “DOWN” to decrease, then press button “ENTER” again to preserve your selection, automatic exit in10S.

2. CHnd
   This option is for setting the unit’s channel model. Press button “MENU”, select CHnd, press button “Enter” to start setting, press button “UP” and “DOWN” to select channel mode, successively 11CH and 9CH, then press “Enter” again to preserve your selection, automatic exit in10S.
   11CH: 11Channel Mode
   9CH : 9Channel Mode

3. SLnd
   This option is for setting the unit’s master-slave mode. Press “MENU”, select SLnd, press button “Enter” to start setting, press button “UP” and button “DOWN” to select master-slave mode, successively “MASR”, “SL1”, “SL2”, then press button “Enter” again to preserve, automatic exit in10S.
   MAST: Master-slave Mode
   SL 1: DMX Mode
   SL 2: Assistant Mode

4. SHnd
   This option is for setting the unit’s memory effects. Press the button “MENU” to select SHnd, press the button “Entom 0-100, then press the button “Enter” again to preserve, the automatic exit in 10S.
   LH 0: Effect 0（recommended）
   LH 1: Effect1
   LH 2: Effect2
   LH 3: Effectt3

5. Sound
   This option is for the “On” and “OFF” settings to sound mode. Press button “MENU”, select Sound, press “Enter” to start setting, press button “UP” and “Down” to select “ON” or “OFF”, then press button “Enter” to preserve, automatic exit in 10S.

6. SEnS
   This option is for adjusting sound sensibility. Press button “MENU”, select SEnS, press button “Enter” to start setting, press button “UP” and “ Down” to adjust sound sensibility from 0-100, then press button “Enter” again to preserve, automatic exit in 10S.

7. bLnd Operating Mode Setting
   This option is used to set the operating mode, press the “MENU” key to select bLnd, press the “Enter” key to enter the settings, and press the “UP” or “DOWN” keys for operating mode selection. Operating mode followed by a “bLAc” , “HLod”, “Soun”, “Auto”. Press “Enter” to save after selecting the operating mode. It will be exited automatically around 10 seconds
   bLAc: Digital back to 0 when 512 signal off
   HLod: Stay last DMX status when 512 signal off
   Soun: Sound activated when 512 signal off
   Auto; Auto-play when 512 signal off

8. LED Display Backlight Setting
   This option is the setting for display panel backlight switches, Choose the “MENU” key to select LED, and press the “Enter” key to enter the settings. Press the “UP” or “DOWN” key to make the backlight switch selection, select “NO “indicates that the backlight has been long on, select” OFF “indicates they didn’t press the key, five seconds off, and begin again until press key operation. After selecting the mode, press “Enter” to save. It will be exited automatically in around 10 seconds.

9. dISP Display Font reverse direction Setting
   This option is the reverse direction of the font setting for the display panel, press the “MENU” key to select dISP, press the “Enter” key to enter the settings, press the “UP” or “DOWN” button to select the font and reverse directions, choose “NO “, font display in a negative direction, select” Yes “font to display the positive direction. After selecting the mode, press “Enter” to save. It will be exited auto- matically around 10 seconds.

10. rPAN X-Axles Inverse Setting This option is set to reverse the X-axis direction, press the “MENU” menu key to select RPAN, and press the “Enter” key to enter the settings. Press the “UP” or “DOWN” button to choose the option for direction, Select “Yes” indicates the X-axis in the negative direction, and select “NO” to show an X-axis in the positive direction. Press “Enter” to save after choosing the correct direction. It will exit automatically for around 10 seconds.

11. rTiL Y-Axles Inverse Setting This option is set to reverse the Y-axis direction, press the “MENU” menu key to select rTil, and press the “Enter” key to enter the settings. Press the “UP” or “DOWN” button to choose the option for direction. Select “Yes” indicates the Y-axis in the negative direction, and select “NO” shows a Y-axis in the positive direction. Press “Enter” to save after choosing the correct direction. It will exit automatically for around 10 seconds.

12. REST Press the “MENU” key to select REST, Press the “Enter” key to enter the setup. User selects Yes, press the “Enter” key, and wait for 1-3 seconds, the lamp will be reset.

13. About Micro Adjustment When the screen shows A001, press the “Enter” key for about 10 seconds, the system will pop up a menu, press “MENU” to Micro adjustment mode. The mode followed by “H000-255”, “Y000-255”, “C000-255”, “G000-255 “” DEFR “. After selecting the operating mode, press the” UP ” or” DOWN “key to micro adjustment. t will exit automatically around 10 seconds after pressing the” Enter “for about 10 seconds.
    H000-255 X motor data bias
    Y000-255 Y motor data bias
    G000-255 Pattern motor data bias
    DEFR Above data back to Factory setting

14. Description
    1. When setting under the hold mode, the first thing is to unplug the signal cable and wait for 30 seconds, then turn off the power. The system saves the last 512 signals automatically.
    2. Under DMX mode: Pls set to LS1, DMX mode, and bLAc: No 512 signal, digital back to zero or HLod: No 512 signal remains the last DMX status got the valid operation. 3. Sound mode switch setting only valid by MAST
    4. SEnS Sound sensitive setting only valid by MAST, Master mode and Soun: it works when 512 signal is off.

Parameters

Channel Descriptions

9 Channel

11 Channel

Fault checking and repair)

connection and see if the fuse is OK
2. Check if the voltage value is in the normal range
3. Check the power switch and a display screen on or off
2| DMX no control| 1. DMX signal light must be on, if not, check the connection
2. If the DMX signal light is on, but no reaction to the channel, check if the address code setting is correct?
3. If the DMX signal is discontinuous, please check if CANNON cable connects well?
4. Please Change to another DMX controller
5. Please Check if the DMX signal cable is to close the high-tension busbar which will damage or interrupt the signal output
3| One of the channels blocked| 1. Be sure no DMX signal is received
2. Driving circuit of the motor might be damaged
4| Light sources work discontinuously| 1. Please check if the input voltage is too high or too low?
2. The inner temperature is probably too high, change a new fan if necessary
5| Can’t be controlled by Sound| 1. Be sure no DMX signal is received
2. Please Check sound control is on and sensitivity is in the right range
3. Please Check if the mic is damaged
4. Please Check if the light is in the “HOLD” situation.
6| Horizontal synchronous belt damaged| 1. Power off
2. Unscrewing screws of the outer case and open the base case
3. Unscrewing screws that connect the base case to nose-arm parts
4. Loose all of the connecting cables
5. Please change the new synchronous belt and installed it on the gear shaft and the motor driving wheel (Attention: the belt can’t be too tight in case broken
6. Please Connect all cables
7. Tighten all the screws
7| Vertical synchronous belt damaged| 1. Switch off the power
2. Unscrew screws of the outer shell of arm parts and take off the outer case
3. Loose the screws of the y-axis’ motor-driven board
4. Please Change to the new synchronous belt (Attention: the belt can’t be too tight in case broken)
5. Tighten all the screws

Maintenance and Clean

Maintenance

1. Please replace in time if the skittle of inner power wires is getting yellow
2. Please do maintenance every 2 months and check all screws, and connection terminals without any looseness. The lack of maintenance might cause a slight problem.

Clean
Two sides of the lens and reflector must be cleaned frequently which will make the effect of light better. Clean times depend on the using environment. A wet, smoky and dirty environment will make the lens accumulate dirt.

1. Using soft linen or specified glass clean lotion
2. Dry the parts carefully
3. Please wipe the exterior of the lens one time every at least 20 days and the inner 30days

Declare
The product is with good performance and complete package when it is delivered. The end-user of this product should follow all the above instructions and warnings. Any damage caused by misuse, malfunction, and problem caused by ignoring the instructions are not included in the repair guarantees of the manufacturer or dealers.

REV: 1.02

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>