BlueKing G1P GameLite Gaming Headphone User Manual

G1P GameLite Gaming Headphone
User Manual

RGB Wireless Gaming Headset

3 in 1 RGB Wireless Gaming Headset
– 2.4G wireless & BT 5.0 & 3.5mm – 50mm driver with immersive gaming bass
– Lossless wireless audio with Low-Latency and Real-Time transmission
– Plug & Play for High-End audio performance,designed for gaming
– Pinpoint positional accuracy for greater immersion and competitive gaming
– Light-Weight and All-Day comfort
– Up to 40-Hour playtime for Non-stop gaming
– Ultra-Soft breathable memory foam ear cushion & Auto
-Adjusting headband for extend gaming sessions
– On-Ear volume control and Mute
– Detachable microphone, Noise-cancellation for uninterrupted focus
– Multi-Platform compatibility: PC, PS4,PS5,Switch(adapter not inc uded), Xbox One (adapter not included),Tablet and Smart phone

Headset Specification

3 in 1 RGB Wireless Gaming Headset
Control mode:| 4 keys
Supported format:| SBC
Modulation mode:| GFSK, PI/4 DQPSK,8DPSK
Receiving sensitivity:| -75dBm
2.4G+BT effective distance:| Om
TBR:| C-5m
Max power:| 5mW THD < 1%
THD:| < 1%
S/N:| 75dB
Frequency response:| 20Hz — 20KHz
Driver:| 50mm, 320, 20mW
Microphone:| 4)4015 3.3V 2.2K0 —38dB
Li-ion Battery:| 3.7V/1200mAH/100K
---|---
Playing time:| RGB backlight off: BT > 40h, 2.4G >24h
RGB backlight on: BT > 24h, 2.4G > 16h
Storage time (80% power
storage when shut down):| Over 6 months
Charging input :| Type-c USB, DC5Vs1000mA
Charging time:| s4.5h
Battery cycle life:| .300 times
Battery protection:| Temperature protection during in charging
Over-current and over-voltage protection

Using Guide

LED indicate status

Receiver- the blue light of the transmitter is always on
Headset charging| The red light is always on
Headset charging complete| The red light – off, blue light – on
Low battery| The red light is always on

Function key operation

State

|

Operation

---|---
Power on| Press 3seconds
Shut down| Press 3seconds
RGB backlight On<=>Off| M Press 2seconds
Last song| – Press 3seconds
Next song| + Press 3seconds
Play/Pause| ** 1 – Click
Volume +| + 1 – Click
Volume –| – 1 – Click
Mic On<=>Off| + M 1 – Click
Answer / End phone| ** 1 – Click
Cell rejection| Press 3seconds
Answer the second call and switch the call| 2 – Click
2.4G version => BT version| **** 3 – Click or take out the 2.4G receiver

Tips

Security information

1. The headset cannot be used when charging, BUT the headset can be set to wired mode with the 3.5mm cable.
2. If you do not plan to use this product for a long time, please store it in a dry environment and charge the headset at least once a month to extend its life.

Operating environment
Do not use the equipment in dusty, wet, dirty, or .close to the magnetic field, so as not to cause internal circuit failure. When placing the equipment, please keep away from the electrical appliances with strong magnetic fields or strong electric fields, such as microwave ovens, refrigerators, etc. Do not use this equipment in thunderstorm weather. Thunderstorm weather may cause equipment failure or electric shock hazards. Please use the equipment in the temperature range of- 10 °C – + 55 C, and store the equipment and its accessories in the temperature range of – 40 °C-+ 70°C. When the ambient temperature is too high or too low, it may cause equipment failure. Do not put the equipment close to a heat source or exposed fire source, such as an electric heater, microwave oven, oven, water heater, fire, candle, or other places that may produce high temperature.
Battery safety

1. Do not disassemble or modify the battery, insert foreign matters, or diffuse into water or other liquids to avoid battery leakage, overheating, fire, or explosion_
2. Do not drop, crush or puncture the battery, avoid exposing the battery to external pressure, resulting in an internal short circuit and overheating of the battery.
3. The equipment is equipped with a non-removable built-in battery, do not replace the battery by yourself to avoid damaging the battery or equipment, causing an explosion, and set on fire.

Environmental protection

1. Do not treat this equipment and its accessories as ordinary domestic waste.
2. Please comply with the local regulations on the disposal of this equipment and its accessories and support the recycling action.

Waste Electrical and Electronic Equipment (WEEE) symbol
The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, You will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the product.
FCC NOTE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>