MAEDHAWK X4 Bluetooth Aux Adapter for HiFi Stereo User Guide
- June 5, 2024
- MAEDHAWK
Table of Contents
Maedhawk Bluetooth Aux Adapter for HiFi stereo – X4
WIRELESS ADAPTER
User Guide
Please read this guide carefully and keep it for future reference.
Package Contents
- BT Receiver
- USB-C Charging cable
- User Manual
Product Overview
- Rotatable audio Jack
- Previous Track / Volume –
- MFB(Multi-Function Button)
- Next Track / Volume+
- TypeC Charging port
- Mic Hole
- Led Light
Specifications
| Bluetooth Chip | QCC3034 |
|---|---|
| Bluetooth Version | BT5.0 |
| Bluetooth Profile | A2DP,ACRCP,HSP,HFP |
| Audio Codecs | aptX HDIaptX LL,aptX,SBCAAC |
| Effective Range | Up to 30m(open space) |
| Battery Capacity | 120mAh |
| Working Time | Up to 8 hours |
| Charging Time | 2.5 hours |
| Charging Voltage | DC5V/1A |
| Frequency Range | 2.402-2.480GHz |
| Dimension | 21.38.572.6mm |
| Unit Weight | 12.5g |
Basic Control
| Function | Operation |
|---|---|
| Power on | Press and hold the MFB for 3 seconds. |
| Power off | Press and hold the MFB for 5 seconds. |
| Enter pairing | 1. Press MFB for 5 seconds in power-off status. |
2. Press MFB for 2 seconds in power-on status.
Play/Pause| Press the MFB once to play/pause music.
Volume -/+| Continuously press the button quickly to adjust vol.
Prev/Next track| Press and hold the button for 3 seconds.
Tips: Device will shut down automatically if no action in ten minutes.
LED indicators
| LED Indicator | Status |
|---|---|
| Sollid red LED | Charging |
| Solid blue LED | Fully charged |
| Flashing red and blue | Pairing |
| Blue LED flashing slowly twice | Playing |
| Red LED flashing twice | Low battery |
How To Use
Charging
- Conect the type end of the charging cable to the charging port of the Bluetooth Receiver.
- Plug the USB end of the charging cable into a USB charging port or any active USB port.
- The LED indicator will turn red when charging. lt will be solid blue when the device is fully charged.
Note: You can use the unit when charging. We recommend charging the unit for at least 2.5 hours before its initial use.
Pairing
- Make the unit into pairing mode(check the basic control)
- The LED will alternately flash red and blue when entering pairing mode successfully.
- Turn on the Bluetooth of the cell phone and search for new devices.
- Tap the “MaedHawk X4” to connect once you find it on your phone, if there is a request for a passcode, just enter “0000”.
Playing music through your receiver
f already connected to the receiver via Bluetooth, simply plug the X4 into the
aux-in port of the car/speaker/stereo to enjoy the audio from your phone.
Aux-in extension cable
If the X4 doesn’t fit into your aux-in port because of a tight space you can
insert the extension cable into the aux-in port and then connect the X4 to the
other end.
Note: The X4 can remember the previous devices and will attempt to pair
with devices automatically each time once power on.
Pair with 2 cell phones simultaneously
- Make X4 pair with your 1st phone successfully, then disconnect them(disable Bluetooth of the phone).
- Make X4 re-enter pairing mode and pair with the 2nd phone.
- Enable Bluetooth on your 1st phone and tap “MaedHawk X4” in the list to connect.
- X4 will automatically connect both phones next time once it’s powered on.
Call handling
| Function | Operation |
|---|---|
| Answer phone call | Short press MFB |
| Reject phone call | Press MFB for 1 second |
| Hang up the call | Short press MFB |
| Redial last number | Short press MFB twice |
| Cancel dialing | Short press MFB |
Care for your MaedHawk X4
- Do not expose the product to direct sunlight or extreme heat
- Do not try to take the unit apart as it may cause serious damage.
- Do not drop it on hard surfaces as it may damage the circuitry.
- Do not use chemicals or detergents to clean the product. to not scrap the surface with sharp objects.
Troubleshooting
No sound can be heard in a car when playing music from a phone?
- Please make sure you are using the AUX mode of the car stereo
- Please adjust the volume of your phone or car system
My friend only can hear a small voice or no voice when I am making a call in my car?
- Please check if the X4 receiver is too far away from your mouth
- Please check if there are obstacles between the receiver and the mouth
- Please check if the Mic hole is blocked with something.
The sound quality is not that good or there Is lag?
- Please check if your cell phone supports aptx HD or aptX LL
- Make sure that the Receiver is in an effective range and there are no other obstacles
Do not dispose of Whiunion batteries with general waste. Please return it to the buttery recycling collection point.
We apologize for any inconvenience caused by minor inconsistencies in these Instructions, which may occur as a result of product improvement and development.
Thank You for Choosing MAEDHAWK
WARRANTY
Please rest assured that our product is guaranteed for 12 months.
Please contact us if you have any questions or need any help.
|
---|---
[email protected]|
[[email protected]](mailto:[email protected]) [Your 100% Satisfaction Is Our Eternal Pursuit]
Documents / Resources
|
MAEDHAWK X4 Bluetooth Aux Adapter for HiFi
Stereo
[pdf] User Guide
X4, Bluetooth Aux Adapter for HiFi Stereo, X4 Bluetooth Aux Adapter for HiFi
Stereo
---|---