pundit PI8000 Pile Integrity + Impact Echo User Guide
- June 5, 2024
- pundit
Table of Contents
PI8000
SWISS MADE
Quick Start Guide & Product Certificates
PI8000
A | ● |
---|---|
B | ● |
C | ● |
D | ● |
E | ● |
F | ● |
G | ○ |
H | ● |
I | ● |
● Included
○ Optional
a A full charge takes around 7.5 h. Please use a 5V 1.5A USB power source
compatible with USB Battery Charger v1.2 standard.
1
![proceq GP8800 Structural Imaging and Inspection With SFCF Ground Penetrating
- Fig 9](https://manuals.plus/wp-content/uploads/2022/05/proceq-GP8800 -Structural-Imaging-and-Inspection-With-SFCF-Ground-Penetrating- Fig-9-550x75.png)
2
![proceq GP8800 Structural Imaging and Inspection With SFCF Ground Penetrating
- Fig 10](https://manuals.plus/wp-content/uploads/2022/05/proceq-GP8800 -Structural-Imaging-and-Inspection-With-SFCF-Ground-Penetrating- Fig-10-550x404.png)
3
![proceq GP8800 Structural Imaging and Inspection With SFCF Ground Penetrating
- Fig 11](https://manuals.plus/wp-content/uploads/2022/05/proceq-GP8800 -Structural-Imaging-and-Inspection-With-SFCF-Ground-Penetrating- Fig-11-550x400.png)
4
![proceq GP8800 Structural Imaging and Inspection With SFCF Ground Penetrating
- Fig 12](https://manuals.plus/wp-content/uploads/2022/05/proceq-GP8800 -Structural-Imaging-and-Inspection-With-SFCF-Ground-Penetrating- Fig-12-550x394.png)
5
![proceq GP8800 Structural Imaging and Inspection With SFCF Ground Penetrating
- Fig 13](https://manuals.plus/wp-content/uploads/2022/05/proceq-GP8800 -Structural-Imaging-and-Inspection-With-SFCF-Ground-Penetrating- Fig-13-550x332.png)
6
10
Declaration of Conformity
Product:
Proceq Part Numbers:
Manufacturer:| Pundit PI8000
349 05 xxx
Proceq SA
Ringstrasse 2, 8603 Schwerzenbach,
Switzerland
---|---
We confirm that the Pundit PI8000 product is in conformity with RoHS, WEEE and the following directives and standards:
RoHS directive:
Safety requirements:
Electromagnetic compatibility:
Determined by:
FCC:
Connection:
Bluetooth module:
RoHS:| 2011/65/EU
EN61010-1:2010/IEC61010-1:2010
RED 2014/ 53/EU/
EN ETSI 300 328 V2.1.1
EN ETSI 301 489-1 V2.2.0
EN ETSI 301 489-17 V3.2.0
IEC 62479:2010/EN 62479:2011
EN61326-1:2013/
IEC61326-1:2012/
CFR47 Part 15
Bluetooth Low Energy
Contains FCC 10: WAP 2001
Contains IC ID: 7922A-2001
EN50581:2012
---|---
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Industry Canada RSS standards. To
comply withFCC and Industry Canada RF radiation exposure limits for the
general population, the transmitter with its antenna must be installed such
that a minimum separation distance of 20 cm is maintained between the radiator
(antenna) and all persons at all times and must not be collocated or operating
in conjunction with any other antenna or transmitter.
Patrick Waller
Chief Operating Officer
Swiss Made Declaration
Products: | Pundit PI8000 |
---|---|
Proceq Part Numbers: | 349 05 xxx |
Manufacturer: | Proceq SA, Ringstrasse 2 8603 Schwerzenbach, Switzerland |
Schwerzenbach, 23.04.2021
Patrick Waller
Chief Operating Officer
Notice
This document (incl. Quick Start Guide and Product Certificates) constitutes
an integral part of Proceq’s General Terms and Conditions of Sale and General
Terms and Conditions of Rental, together with any other guidelines,
precautions, policies, and conditions that Proceq has made and may make
available to you at
www.proceq.com/downloads, as amended from
time to time (the Documents). Proceq reserves the right to change without
notice any information, specifications, and recommendations contained in this
document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of and
your own conduct while using this product, and any consequences thereof. The
use and operation
of this product are at your own discretion and at risk. Proceq hereby
disclaims any and all loss, liability, or damages resulting from or out of
your use of the product. Please ensure you operate and use this product only
for purposes that are proper and in accordance with the instructions given
herein together with all safety and health precautions, applicable laws,
rules, regulations, and as provided for in any of the Documents.
The English version of the content remains the official version.
All translated content should bear an appropriate notice to this effect.
For safety and liability information, please download
atwww.screeningeagle.com/safety-and-liability
Subject to change. Copyright © 2022 by Proceq SA, Schwerzenbach. All rights
reserved.
Proceq UK Ltd.
Bedford i-lab, Stannard Way
Priory Business Park
MK44 3RZ Bedford
London | United Kingdom
T +44 12 3483 4645
Proceq USA, Inc.
117 Corporation Drive
Aliquippa, PA 15001 | USA
T +1 724 512 0330
82039302 | 02.2022
Documents / Resources
|
pundit PI8000 Pile Integrity + Impact
Echo
[pdf] User Guide
PI8000, Pile Integrity Impact Echo, PI8000 Pile Integrity Impact Echo
---|---
References
- Screening Eagle Technologies - Protect The Built World - Protect The Built World
- Download - Protect The Built World
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>