Shenzhen Qianfenyi Intelligent Technology A11 Pencil User Manual
- June 5, 2024
- Shenzhen Qianfenyi Intelligent Technology
Table of Contents
Pencil A ll
User Manual
Packaging List
Pencil x 1
Type C Cable x 1
User Manual x1
PenTipx1
Quick Guide
-
Turn on
Press the button to turn on the Pencil, the indicator light turns white for 3 seconds and then turns off. -
Turn off
Press and hold the button for 2 seconds or let it stand for 5 minutes in the power-on state, the device will shut down, and the indicator will turn red for 3 seconds then turns off. -
Bluetooth Pairing
The pencil will directly enter the pairing state when the device is turned on for the first time. If the pencil is paired, press and hold the key for 5 seconds, the pencil will clear the previous pairing information and enter the pairing state. The indicator will flash alternately red between red and white in the pairing State. -
Shortcut Keys
When the Pencil is paired, click the button to cancel the previous operation; double-click the button to switch to the eraser tool (support Goodnotes&Procreate); in the camera mode, three-click the button to take a remote photo. -
Charging
Use a Types charging cable to charge the Pencil. The indicator light will be red breathing when charging, and it turns white when it is fully charged. -
Magnetic
Pencil can be magnetic stored on the iPad pro, iPad Air, iPad Mini series Apple Pencil.
*Do not support wireless charging – -
Replace the nib
Unscrew the tip counter-clockwise to exact, and clockwise to secure. .
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution:
Any Changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement Caution:
This equipment complies with FCC exposure limits set forth for an uncontrolled
environment.
“This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
7106500157
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>