Shenzhen Haohai Development Technology HH-172C Wireless Mouse User Manual
- June 5, 2024
- Shenzhen Haohai Development Technology
Table of Contents
Shenzhen Haohai Development Technology HH-172C Wireless Mouse
Thank you for choosing our Bluetooth wireless mouse. If you have any questions, please feel free to contact our customer service team.
Product Features
- Single Mode : Bluetooth
- Rechargeable : Built-in rechargeable battery
- Accurate Tracking : Professional IC positioning accuracy.
- Silent Click : Soundless design for the right and left buttons.
- Auto Sleeping : Be in sleep mode in 8 minutes of inactivity.
Charging Instruction
It is recommended to use a computer USB port to charge the mouse, or use a 5V/1A or 2A charger to charge the mouse. Remember not to charge the mouse with a charge above 5V. The red indicator next to the wheel is on when charging, and it goes out after fully charged, it takes 1-3 hours.
Bluetooth Mode
Just switch the “switch” button to the BT position on the left, and then the mouse will automatically find the computer’s Bluetooth, and the computer will also search for the Bluetooth mouse (BT5.2 Mouse), click it and it will automatically connect and use
iPad Instructions
- Update the system to iOS 13 or above,and open the device’s Bluetooth function
- Open Settings—Bluetooth—Turn on Bluetooth
- The device Bluetooth searches for “BT5.2 Mouse” and then clicks it to connect and use it
Note:
- Please input”no code”or 0000″when a four-digit code is required.
- It has been used on the A device. If you want to use it on the B device, you must turn off the Bluetooth of the A device, the mouse needs to be restarted, and then automatically search for the Bluetooth of the B device.
- If connection fails,please delete all paired Bluetooth devices, restart your computer,turn off the mouse,then reconnect the mouse according to the”Bluetooth Modeguide
- Please do not get too close to the”WI-Fl router”or another wireless signal transmission equipment to avid interference.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.