Yiwugo RL-043F Color Video Doorphone Kits User Manual
- June 5, 2024
- Yiwugo
Table of Contents
Yiwugo RL-043F Color Video Doorphone Kits
Product Description
Product Description The color video door phone can be used to 24-our monitor calls, intercom, and unlock. It is a product that is very suitable for villa, single house, hotel, office and etc, giving yu the combined benefit of security and convenience.
Features
- TFT screen with low power consumption, no radiation, and high definition.
- Damage-proof, waster-proof. oxidation-proof, and abrasion-proof metal alloy panel outdoor unit.
- Electrically controlled lock release function.
- Unlock the outdoor gate lock
- Monitoring the outdoor
- Talking volume, brightness, and chroma can be adjusted
- Enclosed with adapter and 15m cable for DIY installation,
- The indoor unit can be hung on the wall
- 16 chord melodies For option.
Package Contents
Safety Instruction
- Keep the indoor unit away from high temperatures such as near an oven or under direct sunlight and high humidity such as bathroom and greenhouse.
- Do not install the indoor unit close to a television or position with strong jamming-the signals the
- TV and the intercom use can interfere with each other
- Do not touch the unit with wat hands
- Avoid throwing, dropping, or hitting the units
- Clean the camera or screen with a soft cloth. Do not use detergent, thinner, volatile or corrosive liquid.
- Do not expose the camera of the outdoor unit to direct sunlight
- Use the product under the circumstance of barrier-froe and no interference
- When a car or a motorbike passes by, the image may be interfered with by the radio wave and become blurred or cut off.
Caution
To prevent damage, the adapter should be fastened on the wall according to the instruction Power plug as the disconnecting device should be kept convenient to operate
System Installation
Indoor Unit
- Fasten the bracket of the video indoor unit on the wall with screws Adopt 4 x 40PM SCrews to install it on Bb standard box Adopt4 x 30BA screws to install t on the wall.
- Hang the unit on the bracket after winning Plug the enclosed adapter into the sockets of AC power and the unit.
Outdoor Unit
Install the outdoor unit at the height of 1.4m-1.7m up from the ground and prevent direct sunlight.
Drill holes of proper size on the wall and fasten the rain shade on the wall with screws.
Wire the system correctly according to the wiring diagram. Install the outdoor unit on the rain shade and fasten the bottom with screws
Seal the screws of the outdoor unit with the enclosed silicone cap
Wiring Diagram
Connect the electric lock with the indoor unit
Connect the electric lock with the outdoor unit
- Press the CALL button of the outdoor unit to call. The doorbell will ring and the images of visitors will be shown on the indoor unit. Press TALK()to activate the intercom. Press TALK again to disconnect. The Time-lapse of the intercom and image is about 120s.
- Press UNLOCK( 0 ) button to release the electric door lock.
- Press GATE UNLOCK () button to release the outdoor gate
- Press MONITOR() button to start monitoring outside. Time-lapse for monitoring is about
- AL the same time. you can touch the TALK ( ) button to activate the intercom with the visitor at the door and press it again to stop monitor and conversation.
- Turn the adjusting knobs and (e)on the side of the indoor unit to adjust the brightness, chroma, and taking volume.
- Press the MELODY SELECTION button to choose chord melody in monitor mode
- 16 chord melodies for option.
Technical Specifications
Indoor Unit
Outdoor Unit
Trouble Shooting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>