artika VAN-SWR-C Swirl Vanity LED Light Fixture Instruction Manual
- June 5, 2024
- artika
Table of Contents
Model: VAN-SWR-C & VAN-SWR-BL
Vanity LED light fixture –
Swirl™
INSTRUCTION MANUAL
IMPORTANT, KEEP FOR FUTURE REFERENCE: PLEASE READ CAREFULLY.
Made in Vietnam Residential use only Indoor use only
INCLUDED HARDWARE
| Item | Description | Quantity |
|---|---|---|
| Wire connector | x 3 + 1 extra |
| Junction box screw| x2
| Support screw| x 2 + 1 extra
| Mounting bracket| x1
| Canopy| x1
WHAT YOU WILL NEED
|
---|---
CAUTION
If using a dimmer, it must be LED compatible.
IMPORTANT
The installer and/or user must read, understand and follow these instructions
before installing the product. This product must be properly installed before
it is used.
If instructions are not followed, the manufacturer will not be held
responsible for any problems or product malfunction. Failure to follow
installation and/or operating
instructions voids the warranty. We recommend that this product be installed
by a certified electrician.
In some states or provinces, it is a legal requirement for this type of
product to be installed by a certified electrician, according to the
electrical and building codes effective in the region where the unit is used.
Switch off the main electrical supply from the fuse box/circuit breaker before
installing the unit or doing any maintenance. Do not use outdoor.
STEP-BY-STEP INSTALLATION
-
Turn off the breaker at the panel.
-
Place the light fixture over the junction box and verify the position with the level. Mark on the wall two reference points at the end of the light fixture where it will be
installed. -
Attach the mounting bracket to the junction box fastening with the junction box screws.
-
Ensure the screws attached to the mounting bracket are pointing away from the junction box (fi g. 1).
-
Attach the hook to the mounting bracket (fig. 2).
-
Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector. Connect the black (L) wire from the light
fixture to the black supply wire (L) from the junction box using a wire connector. Connect the ground wire (G) from the light fixture to the ground supply wire (G) from
the junction box using a wire connector (fig. 2).
-
Push the wires into the junction box. Mount the light fixture onto the mounting bracket and secure it with the decorative nuts (fig. 3).
-
Restore electrical power.
Canada (IC)
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
USA (FCC)
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
Artika For Living Inc. is proud to offer you a three (3) year limited warranty
on manufacturing defects from the date of purchase for residential use only.
The warranty is extended to the original owner in USA and Canada and is non-
transferable. It does not apply to retailers, commercial applications or
establishments. The original sales receipt is
required for all warranty claims. The remedy under this limited warranty shall
be product or part replacement at Artika’s discretion as provided herein and
cannot exceed the original purchase price.
This warranty is valid only on products installed in accordance with the
building code and laws effective in the region where the unit is used as well
as in accordance with the provided instruction manual. It does not cover
products installed incorrectly or subjected to abnormal use. Product(s) or
component part(s) may be required to be returned for inspection and
verification.
Normal wear and tear, misuse, negligence, vandalism, improper maintenance
(surface damage due to chemical interaction or cleaning agents including, but
not limited to, scouring pads, use of cleaners containing abrasives, alcohol
or other organic solvents) improper handling, accident, abuse, fire, flood,
theft, acts of God, neglect, or alteration
of the product will not be covered under this limited warranty. It excludes
any accessories that accompany the product including but not limited to bulbs
or batteries.
The warranty does not cover handling, labor, transportation, or any other cost
associated with the installation or replacement of the product. This limited
warranty is valid in the
country of purchase and by Artika authorized retailers only. Artika for Living
Inc. will not be held responsible for any direct or consequential damages or
injuries related to the use of this product arising from improper use or
installation of this product. Please visit
www.artika.com to discover more about Artika for
Living Inc.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Artika For Living Inc.
1756, 50th
Avenue
Montréal (Lachine), Québec,
Canada H8T 2V5
1-866-661-9606
support@artika.com
www.artika.com
Customer Service
Monday to Friday
9 a.m. – 5 p.m. EST
Documents / Resources
|
artika VAN-SWR-C Swirl Vanity LED Light
Fixture
[pdf] Instruction Manual
VAN-SWR, VANSWR, 2AUHG-VAN-SWR, 2AUHGVANSWR, VAN-SWR-C Swirl Vanity LED Light
Fixture, VAN-SWR-C, VAN-SWR-BL, Swirl Vanity LED Light Fixture
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>