CROSSBEATS Atom Bluetooth Truly Wireless Bluetooth User Manual
- June 9, 2024
- CROSSBEATS
Table of Contents
CROSSBEATS Atom Bluetooth Truly Wireless Bluetooth
Overview
- Touch control
- Charging case LED
- Microphone
- Pressure relief hole
- Rechargeable touch pad
- Indicator light
POWER ON
Take out the earbuds from the charging case, it will automatically power On.
POWER OFF
Place the earbuds back in the charging case, the earbuds will power off automatically.
FIRST TIME PAIRING
Take out the earbuds from the charging case
The earbuds will auto power ON
Search for ‘CB-ATOM’ in your phone’s BT list
Click to connect
MONO PAIRING
For mono mode, take out either of the earbuds when already paired
The music will automatically play in that particular earbud
LED INDICATOR ON CASE
- While charging – White light keep blinkingbased on the charge level
- Low Battery (less than 10%) – The first light will be on for 3 secs
- Battery full – All 4 lights will be on
- Current charge level – Press on the button present at the bottom of the case, to check the battery level of the case.
CHARGING
Connect and use the Type-C cable provided in the box for charging Full charge in less than 1.5 hours
RESET
- Ensure L&R earbuds are disconnected from all the devices, (turn off the Bluetooth option on the device which was connected before)
- Take out the earbuds from the charging case
- Quickly tap on the earbuds for 5 times, and the white light flashes, indicating that the reset is complete
- Place both earbuds inside the charging case & repeat the pairing process
CONTROLS
NOTE: Available only on devices that are Voice Assistant enabled.
CROSS BEATS
+91 80500 56565
+91 80500 56565
support@crossbeats.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>