BAJEAL M1 2.4G Wireless Mouse User Manual

BAJEAL M1 2.4G Wireless Mouse

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

Thisproductis2.4GWirelessMouse. Model:M1

product description see below

1. Compatible withUSB1.1/2.0 specificationsandpassedUSB-IFandWHQLtestcertification

2. 16 channel automatic frequency hopping, strong anti-interference ability

3. ExcellentRFcharacteristicstoensurelong-distance/non-direction

4. Full-speed USB, 2 modes, game mode (250Hz)/office mode (125Hz) Can switch online 250/125Hz

5.  Supporttwocodingmethods (hardware pairing, PCsoftwarepairing)

6. SupportsensortypeTheoriginalseries: 3212/3205/3065/3204UL/V108//8650
   Built-in sensor optimization algorithm to ensure smooth and smooth

7. 6 function keys: left key, middle key, right key, forward key, back key, DPIkey

Instructions

Code
2 ways, hardware pairing + PCsoftwarepairing

A. Hardwarepairing:

1. After powering on, short press the left + center + right three keys at the same time for 1 second, the mouse enters the code matching mode for 20 seconds, and the LED is on continuously.
2. Insert the receiver within 20 seconds, the LED will be off, and the code matching is successful If more than 20 seconds or if the code matching fails within 20 seconds, the mouse will exit the code matching mode and the LED will be off. B. PC software code matching:

1. Open the code matching software, insert the USB into the receiver, and automatically enter the code matching mode

Multi‐ levelsmartpowersaving

1. Stop for 1 second, enter the first‐ level sleep mode, the current is less than 0.3mA
2. Stop for 1 minute, enter the secondary sleep mode, the current is lessthan 0.15mA

• In the primary/secondary sleep mode, themousecanbemovedtowakeup
• After the Sensor LED is turned off, you need to press the key or these scroll wheel to wakeup the mouse
• Unplug the receiver or turn off the PC, the Sensor LED light will automatically turn off. In this state, press the key to wake up the mouse,
• If the button/roller wakes up, the first time the button is pressed, it is a wake‐ up function and not used as a function button

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>