Yibin Dekon Electronic Shenzhen Branch LJM001 2.4G Wireless Microphone For Radio Instruction Manual
- June 5, 2024
- Yibin Dekon Electronic Shenzhen Branch
Table of Contents
Yibin Dekon Electronic Shenzhen Branch LJM001 2.4G
**Wireless Microphone For Radio Instruction Manual**2.4G wireless microphone for radio Product Instruction Manual (LJM001)
Product presentation
The product is smart wireless microphone, which can provide professional level recording output; Plug and play, no APP needed; Multiple uses: it can be used in network broadcast, video VIog shooting, program interview, interview recording, video teaching and other occasions. Wireless microphone consists of two parts: microphone transmitter end, Type – C receiver end. (As shown below)
Usage of application
- Long press the transmitter button for 3S to start up, and the green light flashes at this time;
- Then the receiver Type-C is connected to the mobile phone, and the red light flashes at this time;
- Connect the transmitter and receiver for automatic pairing. The green light will turn to long light after the transmitter is paired well, and the red light will turn to long light after the receiver is paired well, indicating that the connection is successful, and the normal use can be achieved. (note: oppo\vivo\iqoo\Realme brand mobile phone should search OTG in the Settings, turn on OTG power supply to normal use;)
- In an open environment, with a distance of 10 meters, you can open the phone camera, live video and other apps to conduct interviews, live broadcast, karaoke, short video recording and other microphone radio;
- When the transmitter battery is about to run out of power, the green light will turn to fast flashing. At this time, please connect the external power supply or the charging treasure (5V\1A) to charge it and then use it.
- When the transmitter battery is about to run out of power, the green light will turn to fast flashing. At this time, please connect the external power supply or the charging treasure (5V\1A) to charge it and then use it.
Notes
(a) Do not block the receiver with hands or foreign objects to keep the signal
stable.
(b) Some Android phones cannot be paired and used when the receiver is plugged
in, so you need to turn on the OTG mode in the phone Settings.
(c) Do not disassemble, vigorously knock or cut the product
(d) Please use the product at ambient temperature 0C–35C, relative humidity 20
%- 7 0% RH , and ke ep away from humidity, high temperature and fire source
(e) Do not wrap or cover the product with any object during charging and
discharging to ensure ventilation and heat dissipation.
(f) The product contains batteries, do not put the machine in water or near
high temperature, d o not disassemble, impact, squeeze or put into fire
(g) If the product can not be used normally, please contact the company, by
professional technical personnel to deal with
Packing list
Contents of packing List:
- Microphone TX;
- Type c RX;
- user manual;
- flannelette bag;
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
FCC ID: 2A6RY-LJM001
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>