Tecnotropolis 2AXNM Bluetooth PALL-BUDS SERIES User Manual
- June 5, 2024
- Tecnotropolis
Table of Contents
PALL- BUDS SERIES
PRODUCT INTRODUCTION
PRODUCT USER MANUAL
TURN ON / TURN OFF THE BLUETOOTH EARPHONE
TURN ON Method 1: Take out the earbuds from the charging case, the earbuds
will turn on automatically. The led indicator will flash red and blue. Method
2: Touch and hold the MF button for 2-3 seconds. TURN OFF Method 1: Touch and
hold the MF button for 2-3 seconds to turn OFF the Earphone, the led indicator
will flash red rapidly then lights off. Method 2: Put back the earbuds into
the charging case, the earbuds will turn off automatically and start being
charging. Tips: If the earphone is without paired any mobile device, both
units will be turned off after 5 munites; or if the Bluetooth distance is
beyond 10-12m and without paired any device, both units will be turned off
after 5 munites
Take out both earbuds from the charging case, it will auto turn on and auto
paired with each other. Once paired, the led indicator will flash red & blue
quickly. Tips: If pairing is unsuccessful, Touch and hold the MF button on
both Earphone around 5 seconds simultaneously till the led indicator flash
blue ONE time; Then turn on both unit again, and they will auto-pairing.
PAIRING TWS EARPHONES WITH BLUETOOTH DEVICES (SMART PHONE.ETC)
Activate the Bluetooth function on your mobile device, and select the “TWS
5.0” from the list of available Bluetooth devices. Click it to pairing, once
the earphone is paired with a mobile device, you will hear a beep tone and the
led indicator will off.
PLAYING MUSIC
Previous track: Short Press(Touch) the MF button of the Left Earphone twice.
Next track: Short Press(Touch) the MF button of the Right Earphone twice.
Increase Volume: Short Press(Touch) the MF button of the Right Earphone 3
times. Decrease Volume: Short Press(Touch) the MF button of the Left Earphone
3 times. Pause/Play Music: Short Touch of the MF button of either Earphone
will Pause/Resume the music.
ANSWER/ END/ REJECT A CALL Answer incoming call: Short Press(Touch) the
MF button of either earphone. Reject Incoming Call: Press(Touch) the MF button
of either earphone for 2 seconds and release. End a call: Short Press(Touch)
the MF button of either earphone after the phone conversation.
VOICE ASSISTANT : Activated the voice assistant: Short Press(Touch)
around 1.5 seconds of either earphone to activate the SIRI voice assistant
function, only the IOS system is supported. Close the voice assistant: After
activated, short Press(Touch) for around 1.5 seconds of either earphone to
close the SIRI voice assistant function, only IOS system is supported.
CHARGING INSTRUCTIONS
Put the Bluetooth Earphone back into the charging slots correctly and securely to charging.
CARE AND MAINTENANCE
ATENTION
- Please kindly read this user manual before using the product carefully, and keep it for future reference.
- Please charging the product battery fully when first use.
- If do not use the product exceed 2 weeks, please charging it.
4. Please only use the supplied cable to charge the product and certified
adaptor. 5. If the earphone can not be paired with a mobile phone, please
check first if the earphone was in Bluetooth mode; if the earphone is unably
paired with a mobile phone device, please turn off the earphone first, then
turn it on and make sure it is in Bluetooth pairing mode; If the mobile phone
didn’t t response, please reboot the mobile phone; If the earphone didn’t t
response, please reboot the earphone or recovery default setting.
CAUTION
- Do not use the product at excessive volume levels or for a long time, like damage to a hearing may occur.
- Do not charge the earphone with currently exceed 2A, the battery might get damaged.
FCC ID:2AXNMBONE2020
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>