YesWord X-20 Customized Keypad User Guide
- June 5, 2024
- YesWord
Table of Contents
X-20 Customized Keypad
Keypad: X-20 Keypad
APP: YesWord
Android APP
- Download “YesWord” from “www.yesword-tech.com”
- Download “YesWord” in Google play
IOS APP
Download the “YesWord”APP in Apple App Store
Please download the “YesWord” APP on your mobile phone or tablet before
customizing the X-20 Keypad
Product Principle
-
Use the YesWord APP installed in your phone or tablet to customize the keypad.
After customization, the key values will be stored in the keypad.
-
Then the keypad can be used to connect with other devices via Bluetooth (downloading or opening the “YesWord” APP is non-essential)
Support
systems: macOS, IOS, Win10(up), Android
Bluetooth Pairing & Connection
- Turn the power button to “ON”
- Long pressing the“ ”button to active the keypad Bluetooth
- Turn on your device (phone, tablet or PC) Bluetooth.
- . Find YesWord X-20 and tap it to connect the keypad to your device
Note：
Only phones or tablets installed our APP can customize the keypad, while you
can connect the keypad to phone, tablet, and PC to use
Keypad Customized
- After Bluetooth connection, you will see YesWord X-20 is connected to the YesWord APP on your phone or tablet
- Tap the icon of YesWord X-20 and then you can customize the keypad with the APP
- There are two output layouts in the layout selection and please pick the one you want to use
- Click a button on the APP interface to active the customization
“Customized”： Define the button with the actual key value
“Template”： “Media”, “GoodNotes” and “Procreate” are preset
Stickers
We have provided a variety of stickers
More Tutorial
For more using tutorials, please click“ ”on the
YesWord APP
Specifications
| Bluetooth version | 5.0 | Support function | BLE |
|---|---|---|---|
| Lithium battery capacity | 230mAh | Operational distance | 10m |
| Hibernation time | 15 minutes | Dimension | 83.97 x125.23 x12.49 mm |
| Working temperature | -10°C~+55° C | Materials | PC +silicone |
Charging
When the keypad battery is low, the light flashes, please open the cover on
the upper left of the keypad and charge it. It takes about 5 hours to fully
charge. Charging
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>