ShadeCraft Suntable Solar Powered Wireless Charger Instruction Manual
- June 5, 2024
- ShadeCraft
Table of Contents
ShadeCraft Suntable Solar Powered Wireless Charger
INSTALLATION INSTRUCTION
- Use provided bolt and insert from the bottom of base plate. And place sealing ring
- Tighten the bolt using allen wrench to attach sealing ring to base plate.
- Turn the base pole clockwise and attach it to sealing ring
- Slide table top over base pole until it rests on it.
- Listen, charge and enjoy with Suntable.
- Warning sign sticker will be attached on every Suntable when shipping
Manual buttons
- On/Off
- Link multiple suntables
- Volume up
- Pair bluetooth press and hold to start the bluetooth advertising
- Volume down
Warning sign sticker will be attached on every Suntable when shipping
Technical Specifications
- Bluetooth version: 4.2
- Transducer: 2 x 40mm
- Output power: 2 x 8W
- Rechargeable Lithium-ion Battery (14.4 VDC, 2600mAh/3 7.44 Wh)
- Battery charge time: 2 hours @16.8 V==2A
- Music playing time: up to 30 hours (varies by volume level and audio content)
- External Charger: 100~240V university power adaptor
- Solar Panel info: 14″ 10 watts output monocrystalline solar panel
- USB charging info: Standard USB A-type charging output
- Wire le ss Charger info: Qi 7.5watts/10 wants compliance wireless charger
- Dimensions (Hx Wx D): 26 3/4″Hx 17″W (in)
- Weight: 19 Ibs
Suntable is splashproof; submerging it in water or other liquids may result in permanent damage to the device. Splashproof is defined as water splashing against the enclosure from any direction shall have no harmful effect to the unit
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Conne ct the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/tv technician for help