Kington KT-SC03 Multi Function Wireless Charger Power Strip Instruction Manual
- June 5, 2024
- Kington
Table of Contents
Kington KT-SC03 Multi-Function Wireless Charger Power Strip
Multi-function Wireless Charger Power Strip Functional Analysis
Installation Method
Note For Wireless Charging
For the first use, please tear off the transparent film which attached to the
wireless charging non-slip mat
Product Specification
- Product model: KT-Sco3
- Product name: Multi-function wireless charger power strip
- input: 100-240-, 50/60HZ
- Max AC current: 10A
- Wireless charger output: 5W 7.5w /10W /15W max
- Usb output:
- single USB-C output, 5v 3A /9V 2.22A 12V 1.67A;
- single USB A1 output, 5V 3A /9V 2A /12V 1.5A;
- dual USB A1+ USB C output, 5V 3.4A;
- USB A2 output, 5V 1A
- Wireless charger: 4-9mm
- Product size: 180 66*41mm
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class 3 digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult thee dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device aa
distance of 15 cm surrounding the device and 20 cm above the top surface of
the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>