realme RMA207 Watch S Smart Watch User Manual

• Thank you for choosing realme Watch S. Please read this User Manual carefully before you use regime Watch S. We suggest that proper preservation of this User Manual is necessary for further reference.
  • Illustrations of products, accessories and user interface, etc. in the Manual or schematic diagrams for reference only. Due to the updating and upgrading of the Watch, there may be some differences between the physical product and the schematic diagrams. Please refer to the physical product.

Overview

As along -lasting and ultra-light & thin intelligent sports watch, the new realme Watch S Smart Watch (hereinafter referred to as the Watch)integrates functions of blood oxygen measurement, continuous heart rate monitoring, sleep monitoring, sports monitoring, information assistant, and intelligent tool, etc. With the ultra-light & thin and fashionable design, the Watch guides your sports scientifically and monitors your health accurately, which is o suitable for wear both in daily leisure activities and light sports.
Using a color display with a soft and skin-friendly silicone watch strap, the Watch will give you a comfortable feeling.
As long as the Watch is worn on your wrist and matched and connected with your mobile phone, you can experience intimate services of scientific sports, heart rate monitoring,  sleep monitoring, instant notification, etc

Performance

• Low-power Bluetooth
• Full-screen touch
• TT color display
• 24-hour dynamic heart rate monitoring
• Blood oxygen measurement
• Multiple modes of sports
• Sleep monitoring
• Meditation mode
• Message notification
• Music control

Product Information

The main body of the Watch;

The charging base:

In the box
a. Area/me Watch S
b.AUser Manual
c. A charging base

Instruction for Use

Display Control
The Watch adopts a 1.3-inch TFT color display with 360360 pixels, which supports full-screen touch, sliding upward, down, left and right, point touch, and long press operation

a. Slide downwards on the dial interface, the message notification list will be opened; and operate in the reverse direction to return;
b. Slide upwards on the dial interface, the function list will be opened, and operate in the reverse direction to return,
c. Slide rightwards on the dial interface, and the Watch will enter the shortcut settings; and operate in the reverse direction to return;
d. Slide leftwards on the dial interface to switch to other primary interfaces, and slide left or right to switch the primary interfaces;
e. Slide to the right on the non-dial interface, and the Watch will return to the previous interface;
f. Long press the dial interface, and the Watch will enter the dial switching interface.

Burton Control

Power Button
a, When the display is off, short press it to brighten the display
b. in the dial interface, short press it to enter the function list
c. In the non-dial interface, short press it to return to the dial interfaced. During your exercise, short press it to suspend/continue the exercise
e. In the dial interface, long press it to enter the restart/ power-off interface
f. In any mode, long press it for more than 10 seconds to force a restart

Shortcut Button a. When the display is off, short press it to brighten the display
b. In the dial interface, click it to enter the sports list
c. During your exercise, click it to switch the data interface

Connect the APP
a. install the App
Long press the power button of the Watch to turn on it, scan the QR code on the watch display with your mobile phone, and download and install the realme Link App.
You can also scan the QR code below or download and install the realme Link App via the mobile App market.

realme.com/global/Link

b. Binding and connection
Enter the realme Link App, select add device, and complete the binding operation according to the App prompt.

Tips:

• Before binding, please make sure the Bluetooth of your mobile phone is turned on to ensure the normal connection between the Watch and your mobile phone.
• If the device is not found during the process of adding the device, or the device fails to be connected during use, please try setting the watch as Factory Reset”, and then add the device again in the App.

Wearing method

Wear the watch about one finger away from the carpal bone, and adjust the tightness of the watch strap to ensure that the heart rate sensor can collect data normally.

Tips:

• Wearing the Watch too loosely may affect the heart rate monitoring data

Low Battery
When the power of the Watch is equal to or less than 10%, the single vibration pop-up window will display Battery less than 10% and Please charge it in time”;

When the power of the Watch is equal to or less than 3%, the pop-up window will show Battery is too low, the watch will power off.

Charging

a. Place the Watch on the charging base, so that the charging contact piece on the back of the Watch is completely attached  to the metal contact on the charging base;
b. Connect the charging base to the standard US8 charger with the output voltage of 5 and the output current of 0.5A and above, which must be purchased from formal channels.

Tips:

• If the Watch cannot be turned on after being placed for a long time, it needs to be pre-charged for about 1 minute before the charging icon is displayed.
• Please clean the charging contact piece of the Watch before charging to avoid sweat or moisture residue.

Using Guide

Please find detailed instructions for realme Watch S from the following path:
realme Link” →App Settings →Using Guide How to view Regulatory information” on your watch?
You congo to the Settings page → System → Regulatory information to view Regulatory Information”,

Specifications

Warranty Policy

Thank you for purchasing realme products. If there is any product quality problem within 12 months from the date of purchase, you can enjoy the warranty service of our company for free.

Note:

• A valid purchase certificate must be issued by the selling unit when purchasing.
  The warranty card and purchase voucher shall be properly kept by the user, without being reissued if lost

• If the product fails due to non-human causes, the user can make the repair free of charge at realme Customer Service Center within the warranty period by presenting the warranty card and the purchase voucher.

Situations not covered under the warranty policy:

• Out of warranty period
• Damage caused by failure to use in compliance with the requirements in the Manual or the Using Guide.
• Damage caused by human causes.
• Faults caused by unauthorized disassembly, maintenance, and modification of the product.
• Damage caused by force majeure events (such as floods, earthquakes, lightning, etc.)
• No warranty card, invoice, or the warranty card is inconsistent with the invoice information
• Natural wear and tear of products
• Other faults and damages are caused by non-product quality problems.

Contact information:

• Service website www.realme.com

Warranty Card (stub copy)

Dear user, thank you for using our company’s product. In order to serve you better, please read and keep this warranty card properly after purchasing the product.

User Information

Nome:____
PhoneNo:
Address:__
E-mail:__

Product Information

Model:____
S/N:_____

Sales Information

Date of Purchase:_
lnvoiceNo.__
Selling unit’s Name;_
Phone No:____
Selling Address:____

Warranty Card (customer copy)

Dear user, thank you for using our company’s product. In order to 0serve you better, please read and keep this warranty card properly after purchasing the product.

User Information

Nome:____
PhoneNo:
Address:__
E-mail:__

Product Information

Model:____
S/N:_____

Sales Information

Date of Purchase:_
lnvoiceNo.__
Selling unit’s Name;_
Phone No:____
Selling Address:____

Safety Instructions

1. This product is not a medical device and cannot be used to diagnose, treat, cure or prevent any disease,
2. Please consult your doctor before starting or adjusting only exercise pion,
3. If you currently have any preexisting physical diseases, and using this product may have an impact on this disease, please consult your doctor first;
4. Do not check the display information when driving, being distracted, or in other potentially dangerous situations;
5. This product is not a toy. Do not allow children or pets to play with this product. Small components of the product may Couse suffocation;
6. The product function may be affected by external factors, so the data is for reference only;
7. The product has a heart rate recording function. Wearing it for a long time may Couse some users to have skin discomfort and allergic symptoms, or bring certain risks to users with certain diseases. Please consult your doctor before using or stopping using the product in any of the following situations:

• Epilepsy or sensitivity to light;
• Poor blood circulation or prone to have bruises; heart disease Or other diseases;
• You are taking any light-sensitive drugs.

Frequently Asked Questions

notification is on (App)
• regime Linke APP is not allowed to access phone notification
• Pease make sure watch is connected to mobile device
• please make sure they retire Link App is not shut down in the background
• please make sure the Do Not Disturb is off on the water
 Fail to connect your Watch| • power off →Long press the side button for S seconds to power on
• please keep watch close to a mobile device to proceed with the connection
• Please keep Bluetooth of mobile device on during connection
• Please restart Bluetooth of the mobile device if tail to connect
• Please download regime Link before start paining – -search realme Link” on google play
• phone system is too old →Android 5.0 or above, realme Link is not available on iOS
Fail to pair with App| • Power off →Long press the side button for seconds ta power an
• please keep watch close to a mobile device to proceed to pair
• Please keep Bluetooth of mobile device on during pairing
• please restart Bluetooth of the mobile device if tail to pair
• please download regime Link before start pairing search realme Link” on google play
• phone system is too old →Android 5.0 or above, realme Link is not available on iOS
Allow realme Link to use the phone camera to scan QR code –» phone settings =» App »> realme
Link camera
• Select the correct watch in realme Link
No SPO2/HR measurements| • Please keep still when measuring SPO2/HR
• Please make sure your watch is clung to your skin and 2cm away from your wrist. Please make sure your skin is dry and properly wear
• Please keep your armrest still, keep the screen upward
Fail to control the Camera| • Please make sure the watch is connected Reconnect on APP
• please follow the instruction of the App to pair your watch in the system Bluetooth setting of mobile
device
• Turn on photo control on App_open camera of mobile device, click Camera” of the watch to  control the camera
Fail to control music| • Please make the sure the watch is connected → Reconnect on APP
• Turn on music control on the APP, open the music player of the mobile device, and click “Music” of the watch to start music control
No message notification| • please make sure the message notification is on (App)
• regime Link App is not allowed to access phone notification
• please make sure the watch is connected to a mobile device
• Pease make sure the realme Link APP is not shut down in the background
• please make sure the Do Not Disturb is off on the watch
Incorrect Step Counting| • Abnormal vibration of equipment: wear the Watch correctly to avoid abnormal vibration;
• Walk less than IO steps: walk more than IO steps continuously
• Slide or walk in slippers: walk in normal posture
No display| • Low battery. connect the charger to charge the Watch.
Foil to synchronize data with  the AP| • The mobile phone’s Bluetooth is off turn on the Bluetooth of the mobile phone;
• The App is shut down or crashed: reset the regime Link APP;
• Out of Bluetooth signal range: Turn on Bluetooth and bring your device close to the mobile device

For further information, please scan the QR code below to follow us.

http://iot-wiki.realme.com/realmeWatch/faq.html

EU Declaration of Conformity (DoC}

Hereby, realme, declares that this device is in compliance with the essential requirements and other relevant provisions of Radio
Equipment Directive 2014/53/EU.
The declaration of conformity may be consulted at www.realme.com/global/’support/eu- declaration

Warnings

• Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
• Disposal of a battery into free or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas;
• A battery is subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Recycling Initiative

At realme, we understand that our responsibility doesn’t end at selling you our products. realme has been working in the area of safe disposal of electronic waste. Since mobiles,  wearables, and other electronic items are made of hazardous Constituents. Under the Guidelines of the Ministry of Environment, Forest and Climate Change, Government of India,  E-waste (Management) Rule, 201 and Amendment E-waste Rule 2018.

• realme will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products.
• realme will comply with all the applicable laws related to e-waste management.

As a part of the e-waste recycling initiative, realme has partnered with an authorized e-waste company named 3 Recycler for the collection, dismantling, and disposal of E -waste collected from all over Indio. SR’s vision is to look at e-waste not just as waste, but as an important resource that can be made useful instead of shunning it as an asocial and environmental burden with their fully automated facility for e-waste recycling.
For further information about e-waste recycling and our e-waste recycling partner & their process, you may log on to www.rrecycler.com or write an email to admin@rrecycler.com Call us on the toll-free hotline – 1800 102 8632

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device  must accept any interference received, including interference that may cause undesired operation
NOTE The manufacturer is not responsible for any radio or Ty interference caused by unauthorized modifications to this equipment. Such modifcations could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part IS of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may Couse harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/Ty technician for help
• Thie device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter

RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

realme
Service website:www.reaime.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>