realme RMA216 Buds Qs Wireless Bluetooth Earphones User Guide

Realme RMA216 Buds Qs Wireless Bluetooth Earphones

USE WITH realme LINK

• realme Link can provide realme Buds Qs more functions setting
• Search and download “realme Link” APP from Google Play. Scan the QR code to download “realme Link” APP if failed to search in Google Play Store.

Use suggestions

Wear headphones right side)

1. Use the largest area possible of your fingertip to tap the touch sensor area. ear canal.
2. Put the earphone into the ear canal and rotate until a comfortable fit is achieved.

Touch control instructions:

1. Insert the earbud: Keep the earplug pointing towards your
2. Gently increase the force of the fingertip to click on the touch area in order to improve the touch recognition.

PACKING LIST

PRODUCT INTRODUCTION

1. Charging Box
2. Indicator
3. Micro-USB charging port
4. Earbuds touch area
5. Mic
6. Front cavity tuning holes
7. Charging contacts
8. Rear cavity tuning holes

HOW-TO

On
Take earbuds out of Charging Box for auto ‘ON
Sleep
Put earbuds back into the charging box for auto OFF and sleep

Bluetooth pairing

• First use: take earbuds out of Charging Box for aut0-pairing.
• Pairing mode: take earbuds out of Charging Box for pairing mode if no device connection within 15s; when earbuds are connected to the phone, disconnect the Bluetooth Connection from the phone for pairing mode; when earbuds are in Charging BOx, press and hold touch area for bs for pairing.
• Bluetooth connection: When earbuds are in pairing state open Bluetooth search interface, locate realme Buds Qs and then click Connect.

Auto reconnection
Auto connects to a previously paired device when powered on.

Touch operation

• Touch twice: Play/Pause music, Answer the phone
• Touch three times: Next ‘media/song/video
• Press and hold 2s: If in a call or call incoming-Reject Call/Hang up.
• Press and hold 2s on both sides: enter/exit game mode More customized operations can be set through realme Link

Charging

• Earbuds charging: Auto charging of the earbuds begin when put into the charging box
• Check Charging box battery: When Charging through a USB, the red indicator shows that the case is charging9, and the green indicator shows fully charged.

Check earbuds battery
After connecting to the phone, the earbuds’ battery can be checked in real- time Link or Bluetooth status bar (phone system support required).

Reset earbuds

1. lgnore or cancel realme Buds Qs pairing and delete connection history in Bluetooth device list.
2. Put earbuds into the Charging Box, and press and hold more than bs the touch areas of both earbuds, the reset Succeeds when the phone locates realme Buds Qs.

BASIC PARAMETER

• Product Name: realme Buds Q
• Model: RMA216
• Charging Box Port: Micro-USB
• Single battery life: about 4.5 hours of music playback about 3 hOurs for continuous call
• Total battery life with Charging Box: about 20 hours
• Charging time: about 2 hours
• Bluetooth Version: 5.0
• Bluetooth Protocols A2DP/AVRCP/ HFP
• Bluetooth Code: SBC/ AAC
• Communication distance 10 meters
• Frequency: 2.4-2.4835GHz
• Power: >- 6dBm, 8dBm

WARRANTY

Thank you for purchasing realmes product. You can enjoy the Warranty service of our company in case of any quality problem within 6 months from the date of purchase. Precautions:

1. A valid proof of purchase must be issued by the seller when purchasing.
2. Warranty card and proof of purchase shall be properly kept by the user. No replacement if lost.
3. The user can carry the Warranty card and proof of purchase to repair the product for free at the Realme Customer Service Center within the warranty period if there is a failure caused by non-human factors.

Non-warranty Situations:
During the use, any of the following circumstances is not covered by the warranty.

1. The warranty is overdue.
2. Damage caused by failure to use in accordance with the requirements in the Manual or the User Guide.
3. Damage caused by human factors.
4. Failure caused by unauthorized disassembly, repair, and modification of the product.
5. Damage caused by force majeure (such as flood, earthquake, lightning, etc.).
6. There is no warranty card, invoice. or the warranty card does not match the invoice information.
7. Nature wears.
8. Failure and damage caused by other non-product guality problems.

Contact information:

• Website: www.realme.com
• Email: service@realme.com
• Toll Free 1800 102 2777

Solutions to non-fault problems

1. What should I do if there is no sound in one earbud while talking on the phone or listening to music with realme Buds Qs?

   • Put both earbuds back into the charging bOx and connect the USB cable to charge the case for at least 30mins; Keep both earbuds in the charging box, and press the touch area of two earbuds for more than 5s and carry Out Bluetooth pairing again.
   • Put both earbuds back into the charging box Tor 5s and tnen take them out and reconnect them to confirm that the problem is solved. Slightly press the charging pogo pin in the charging case to confirm if it springs back up after being pushed down. If it stays sunk in and doesn’t spring back up, it IS SUggested that you get the charging box replaced from our servIce center Please check whether the charging interface of earbuds is clean. If it is dirty, please wipe it up f the problem cannot be solved with the above methods, it is suggested that you visit the nearest service center to get your realme Buds Gs checked.

2. What should I do if the music plays on and off when using the realme Buds Qs?

   • Please adjust the usage position and avoid usage in an environment with a lot of interference. KeeP it away from objects which cause electromagnetic interference, Such as a microwave oveen.
   • Put both earbuds in the charging box for more than 5s, take them out, and reconnect them to your mobile phone to confrm whether the problem is solved. If the problem cannot be solved with the above methods, it Is suggested that you visit the nearest service center to get your realme Buds Qs checked.

3. What should I do if the realme Buds Qs does not connect withmy mobile phone even after resetting?
   Please clear the pairing history on the mobile phone after resetting of realme Buds
   Qs and then try again.

4. How can I charge realme Buds Qs case?
   It can be charged with a Micro-USB cable. The red indicator of the charging box WIll be on during charging, and the green indicator will light up after it is fully charged.

5. What is the effective Bluetooth range of realme Buds Qs? What will happen if the distance between my phone and the earbuds is larger than this distance?

   • In the case of no barriers or interference, the effective Bluetooth range of realme Buds Qs is about 1Om.
   • If the distance is longer than 10m, the connection between earbuds and your mobile phone will become unstable and it may get diSConnected. They will be connected again when the distance is less than 10m.

6. My realme Buds Qs do not connect to my mobile phone automatically after the charging box is opened. What should I do?
   You should take both the earbuds of realme Buds Qs out of the charging box, so that they can connect to your mobile phone.

7. Are earbuds of realme Buds Os waterproof?
   Earbuds of realme Buds Qs feature IPX4 water resistance, but the charging box is not waterproof

8. Can one earbud of realme Buds Qs connect to one mobile phone while the other one connects to another mobile phone?

   • realme Buds Qs does not support connection to differet devices at the same time.

NOTES

• Avoid exposure to liquid and high humidity environment.
• Avoid throwing, crushing, or tossing as to prevent damage.
• Avoid Contact with strong magnets as to prevent the magnetiC earbuds from being demagnetized.
• Keep out of the reach of children.
• Do not attempt to dissemble the device. Please contact Customer support for assistance.
• For your safety, please do not use while riding a motorcycle or bike, driving, or crossing the road.
• For health reasons, avoid listening on high volume for extended periods.

RF Exposure Information and Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with part 15 of the FCC rules.Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipmenthas been tested and found to comply with the limits for a Class B digital device, pursuantto part15of the FCCRules. These limits are designed to
provide reasonable protection against harmful interference in aresidential installation.
This equipment generates uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to Correct the interference by one or more of the folowing measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• realme (Global) - Make it real
• realme EU Declaration - realme (Europe)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>