deco gear DGVIEW430 43 Inch Curved 3840 x 1200 120Hz Gaming Monitor Instruction Manual

deco gear DGVIEW430 43 Inch Curved 3840 x 1200 120Hz Gaming Monitor

Safety Precautions

1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.
3. This monitor features ventilation openings on the back of the unit. Avoid blocking these openings to prevent the monitor from overheating.
4. Avoid placing this monitor near any heat sources e.g: portable heaters or heating vents, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen or any part of the monitor.
6. Do not insert anything into any part of the monitor especially the ventilation openings.
7. Always make sure your monitor is placed on a secure, level surface to prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non use.
9. Do not place heavy items on the monitor or monitor cables.
10.  Do not attempt to disassemble or remove parts from the monitor. Any disassembly or modification etc not performed by an authorized technician can result in damage to the monitor and/or possible exposure to high voltage electricity which may lead to serious injury or death.

Box Contents

Monitor x 1

Stand Base x 1

Stand Stem x 1(with Attached Bracket)

Screws x 4

Screws x 4 (for Mounting)

Power Cable x 1(AC 100-240V, 50/60Hz)

DP Cable x 1

User Manual x 1

The screws come in three size: 12mm x 4, 35mm x 2 and 17mm x 2.

Product Overview

Monitor Buttons

1.  Menu Button: Press to display the OSD menu or enter sub-menus.
2. Down Button: Press to move down in the menus.
3. Up Button: Press to move up in the menus.
4. E Exit Button: Press to exit.
5. Power Button: Press to turn the monitor on/off.
6. The E button can also be used to switch between Limit and Full color gamuts whe a compatible graphics card and either HDMI or DP connections are in use.

Monitor Ports

• 6 Audio Output: Insert the audio cable for output of audio signals.
• 7 DP Connector: Insert one end of the DP cable into the computer’s DP output and con­nect the other end to the monitor’s DP port.
• 8  HDMI Connectors: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor’s HDMI port.
• 9 Power Connector: Insert the Power Cable to supply power to the monitor.

Remote Control

•  Press to turn the monitor on or off.
•  Press to switch between HDMI or DP input.
• OK: Press to enter the OSD menu or press to confirm.
•  After entering the OSD settings menu, press any of the arrow buttons to move within the menu. After entering the navigation menu, press t> to enter the LED effects console.
• Press v directly to switch ECO modes.
• Press to turn HDR on or off.
• Press to exit the OSD menu or return to the previous menu.
• Press to turn Gameplus mode on or off.
• Press to increase volume.
• Press to decrease volume.

Avoid pressing two remote buttons simultaneously as this may cause malfunctions. Avoid using the remote in areas with extreme temperature fluctuations. If the remote will not be used for extended periods of time, remove the battery. The remote control’s range is approximately 16.4-23 ft. Use it within this range. Use 3V lithium battery CR2032 or equivalent. Remember that small batteries are easily swallowed by young children. Keep batteries away from children. Call 911 if you believe a battery was ingested.

Stand Installation

Keep the foam underneath the monitor before attaching the stand. Open the package, take out the product with foam still attached, and gently place ii on a desktop or table.

Lock the base and stem with three screws

Take out the monitor and remove the bottom foam section.

Align the stand stem’s bracket with the opening on the back of the monitor. and carefully insert bracket. The pieces should click into place

When remove the base, take off the decorative cover of the back shell and pull down the quick remove button to remove the base.

To avoid damage, do not touch the screen when moving the monitor.

Wall Mounting

This monitor ONLY includes screws which may be used when attaching the monitor to a mount. No mount or mounting accessory is included. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor was already attached to the stand, remove the stand.

Remove the original screws x 4 (0) from the opening in the back of the monitor. Follow the directions received with your mount, stand, or accessory and install the monitor on the wall or fixture as desired. Remember to use the included screws when attaching anything to the back of the monitor. Refer to the image (8) for correct screw placement.

Use only the Screws 35 mm x 2 pcs, 17mm x 2 pcs provided with this type of installation. Do not discard the original screws as these may be needed for future use.  Follow the directions received with your mount, stand, or accessory and install the monitor on the wall or fixture as desired.

Connectivity Options

Connecting the Power Cable

Connect the included power cable to the power connector, and then plug the other end into an wall outlet.

Connecting Your Earphones

Plug in your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones and other audio devices not included.

Listening to loud audio for prolonged periods of time may permanently damage your  hearing.

DP Connectivity

In order for the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer.

HDMI Connectivity

In order for the monitor to receive HDMI signals from the computer, use an HDMI cable to connect the monitor to the computer.

Basic Operation

Insert one end of the DP cable into your PC’s graphics card. Other connection types ma be used. Additional cables not included. For optimal refresh rate or performance it is recommended to use a DP (display port) or HDMI cable with the monitor’s corresponding connector.  Connect the other end of the cable to the corresponding connector on your monitor.

Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall
outlet cannot be reached directly. Locate the power button on the monitor and press it to turn the monitor on.

FreeSync

The feature itself is off by default. In order to use this feature, please note Set the Freesync function in the OSD menu to on,you must have hardware with FreeSync capability, a DP cable, and the latest graphic drivers. To use this feature, connect your computer and monitor with a DPcable. After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu.

Indicator Light

Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source ,no horizontal or vertical signal has been detectde or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected

05D

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M button. When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts etc. Press any one of the buttons (M, T,  to activate the navigation window

Press M button to enter the OSD screen.

• Press up and down to browse functions.
• Highlight the functions you want to set, and press M to enter the sub menu.
• Press up or down to browse the sub-menu, and press M to highlight the functions you want to set.
• Press up or down to highlight the options, and press M to confirm the settings and exit the current screen
• Press E to exit the current screen.

OSD Menu Functions

LED Effects System Console

Press any one of the buttons M up downon E and maneu the monitor to activate the navigation window.

Press button on monitor or press► on remote to enter the LED Effects menu.

• Press up or down to select the settings.
• Highlight the desired option, and press M to confirm.
• Press E to exit the current settings.

RGB Ranges and Gameplus Switching

Press any one of the buttons M up down down  E and maneu to activate the navigation window.

Press T button to switch Gameplus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios.

Press E button to switch RGB Ranges included Limited and Full. Full Range is suitable for most activities.

Troubleshooting

General Problems

The screen is blank
 Press the power button to turn the monitor on. Confirm the brightness and contrast settings are set normally. Check if the indicator light is flashing. If so, there is no signal from your video source.  If your source is a notebook or laptop, make sure it’s powered on and set to mirror or extension mode.

The image is out of focus
Make sure the video cable is inserted properly at both ends.

The screen is flashing
Try an alternative power source. Insufficient power can cause this issue. Make sure devices such as non-shielded speakers, fluorescent lighting, AC transformers, table fans etc. are a safe distance away from your screen to avoid magnetic disturbances.

The color bleeds or visual effects appear unusual
If your screen is all red or blue, or any colors disappear, check to see that the cable is properly inserted. A loose connection can cause a bad signal. Try connecting to another video source for comparison.

The screen appears to be scrolling, rolling, or moving unusually
Check that your source frequency is within 48-120Hz. Reconnect and ensure your video cable is secure.

The monitor needs cleaning

• Make sure the monitor has been powered off before cleaning.
• Always use soft, non-abrasive cloth when cleaning.
• Use dry, non-abrasive cloth to gently remove debris or dust.
• If necessary, lightly dampen a non-abrasive cloth with water and gently clean the surface.
• Never use alcohol or ammonia-based cleaning solutions.
• Never spray liquid directly onto any part of the monitor.

The indicator light does not work
 Check if the power is on.  Make sure the power cable is properly connected to the monitor and power source.

Cannot plug and play
Check PC requirements to make sure it is compatible with the monitor. Check graphics card requirements to make sure it is compatible with the monitor.

Dim image
Adjust the brightness and contrast ratio.

Image jitter/moire pattern
Nearby electric equipment may be interfering with the monitor.

Light indicator is on or flashing, but there is no image displayed on screen

• Check if the monitor power is on.
• Check if the graphics card is installed properly.
• Make sure the power cable is properly connected to the monitor and power source.

Image position is not centered/the size is not right
 Please adjust Clock or Auto settings. Color difference colors are not optimized.Adjust RGB color settings or reset color temperature.

PIP (Picture in Picture) Input Information

O means this feature is supported while X means it is not supported.

PBP (Picture by Picture) Resolution Information

While using this feature and in order to obtain an optimal viewing experience, it is recommended to set both panels to the same resolution.

At this resolution, tearing and visual deformation should be minimized.

Information

Specifications

Other Useful lnformation

Responsible Disposal

Packaging
The packaging of this product has been selected from environmentally frienaly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach ana are safely disposed of. Please ensure they are offered for recycling rather than tlirow1ng these materials away.

Monitor
At the end of its working life, do not throw this monitor out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled and used again. Contact your local authority for your nearest recycling centre. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could potentially be hazardous to the environment and human health.
Manufacturer’s 1-Year Limited Warranty
The manufacturer warrants that all parts and components are defect free in materials and workmanship for 1 year. This warranty is valid only in accordance with the conditions set forth below

1. The warranty extends only to the original consumer purchaser and is not transferable. In addition, proof of purchase must be demonstrated.
2. This limited warranty is the only written or express warranty given by the manufacturer. Any implied warranty of merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
3. This warranty gives you specific legal rights. You may also have other rights which vary by state.

Procedure for Replacement or Return within the 1 Year: To return the product for replacement or refund within the 1 year, the original purchaser must pack the product securely and send ii postage paid with a description of the reason for replacement or refund, proof of purchase, and include your order number on the package, to the following address: Deco Gear 80 Carter Drive Edison, NJ 08817 For Technical and Warranty Support

1-800-s12-3224
WWW.DECOGEAR.COM
G 80CarterDr.
Q Edison, NJ, 08817

References

• Deco Gear Official Store | Electronics, Gaming, Kitchenware and More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>