WOHOOM LY-129 Baby Monitor Instruction Manual

WOHOOM LY-129 Baby Monitor

WARNING

1. Please keep the product away from the baby more than 3 feet (1 meter).
2. Please place the product in a dry place to prevent short circuits caused by dampness.
3. Please use the Ac adapter(s) provided by us only. We do not recommend using Ac adapters and charging cables from other brands.
4. This product is not medical equipment. Check your baby’s activities regularly as this product is not designed for supervision but for assisting your supervising.

PACKING LIST

1. Monitor
2. camera
3. Monitor AC Power Adapter
4. camera AC Power Adapter
5. Mount kit
6. User Manual

CAMERA STRUCTURE

1. Light Sensor
2. IR LED
3. Camera
4. Power LEDs
5. Mic
6. Speaker
7. Temperature sensor
8. DC connector 3.5mm
9. Pairing key
10. Antenna

MONITOR STRUCTURE

1. Power /Sleep: Long press to turn on/off the monitor. Short press to turn on /off the screen.
2. Menu/Black: Press to enter the menu page or press a Back button.
3. Up: Control motor to move up (Live video). Press to change your selection upward (Menu setting).
4. Down: Control motor to move down (Live video ). Press to change your selection downward (Menu setting).
5. Left: Control motor to move left (Live video). Press to change your selection leftward (Menu setting ).
6. Right: Control motor to move right (Live video). Press to change your selection rightward (Menu setting).
7. OK/Camera Switch: Press to confirm your selection or switch cameras if connected with 2 or more cameras.
8. Talk: Press to talk to your baby in the monitoring image.
9. Charging Indicator: It gives off red light while the monitor is being charged.
10. Power Indicator: The green light will turn on when turn on the power
11. Microphone.
12. Volume Button: Press to adjust the monitor’s volume in the monitoring image.
13. Power input
14. Support stand
15. Speaker
16. Antenna
17. Reset hole

STATUS BAR ICON DESCRIPTION

1. Signal strength
2. Temperature
3. Camera connected
4. Alarm prompt
5. Feeding
6. Lullaby
7. Camera cycle time
8. Sound sensitivity
9. Date/time
10. Battery capacity

HOW TO USE IT?

Getting started

Step1:

1. Plug the AC adapter into a power socket.
2. Connect the camera to the DC adapter.

Note: Place the camera away from your baby 3ft/1 m at least.

Step2:

1. Plug the AC adapter into a power socket.
2. Connect the monitor to the DC adapter.

Note: The monitor takes about 3 hours to be fully charged, and it lasts about 4 hours.
Step3:
Long press the power button to turn on the monitor then you can see the monitoring interface.
Note: The camera and monitor have been paired already before you get them. So you don’t need to pair them.

CAMERA SETTING

Add camera
This function is to add a new camera to the monitor.

• Press the button to enter to the menu page. Select I and press OK to enter camera settings.
• Select Add Camera and press the OK button.
• Pop-up pairing interface. Countdown 60sec.
• Press the Pair button on the back of the camera. Then see the camera added successfully.

Note: Four cameras at most can be connected to one monitor. The video resolution is 720P when only one camera is connected. The video resolution is VGA when connect to 2-4 cameras,

Delete Cameras

• Press enter menu page. Select and press OK to enter camera settings.
• Press v to select the Delete Camera and press OK.
• Press A or V to select the camera you need to delete Press OK to confirm you choose.
• Select the Delete option and go to delete your camera. Use the button to select Cancel to return to the superior menu.

Cycle Cameras
This function is setting the time for switch one camera to another camera if connecting multiple cameras.

• Press enter menu page. Select and press K to enter camera settings.
• Press v to select the Cycle Cameras and press OK
• Choose the time you want. Press OK to confirm.

SLEEP MODE

This function is to prolong your monitor’s run time by shutting down the screen.

• Press to enter the menu page Select Press OK to enter the setting.

• Select OFF to turn off Sleep Mode. Press A or v button to select the time you want. Press OK to confirm.

• Press to back to menu interface.

TEMP/SOUND ALERT

Temp Activated Alert

This function is to send alarms if the temperature exceeds your settings.

• Pressto enter menu page. Choose and press OK

• Select the Temp Activated Alert and press OK.

• High-temperature setting. Select the option you want. Press OK to confirm.

• Low-temperature setting. Select the option you want. Press OK to confirm.

• Alert Duration setting. Select the time you want. Press OK to confirm.

VOX Sensitivity

Sound Level
There are six options for sound detection, off,1-5. OFF means you shut down the function.1 means the sound sensitivity is the highest and so on for Medium and Lowest(5 sensitivity)

• Press to enter the menu page. Press the button to select the Vox sensitivity and press OK.

• Sound level setting.1-5 levels of sensitivity you can choose. Press OK to confirm you want select one.

Alert Duration

• Pressto enter menu page. Choose the Alert Duration option and press OK.
• There are four options of alarm times you can choose. Press A or v to choose the right time and press OK to confirm.

Note: The alert duration can adjust to 5s-30s.The alert interval time is 1 minute. 5s means it will alarm you and lasts 5s every 1 minute when the sound is detected, and so on for other options.

TIME SET

Set Time

This function is to set Date/Time, and turn on-off OSD. The real-time you set that will be displayed on the status of the monitor if you turn on OSD.

• Pressto enter menu page. Choose to enter the settings.
• Select Set Time and press OK to enter the next interface.
• Press A or V to choose the ON or OFF. ON stands for starting the setting.
• Use the 4, A, and v buttons to change the Date/time settings. Press OK to finish setting.

Feed Timer

This function is to remind you of feeding your baby. Off means you shut down the function,2.5H hour means reminding you every 2.5 hours, and so on for other options.

• Pressto enter menu page. Choose Feed Timer and enter the setting.
• Choose the time you want. Select Off to turn off the feeding reminder.

Note: Feeding alarm lasts 5 seconds.

BRIGHTNESS

This function is to set the brightness of the monitor screen.

• Pressto enter menu page. Chooseenter the intertace.
• Use, A button to adjust the brightness.

Note: The higher the brightness, the higher the power consumption. It has an impact on the working time of the monitor.

LULLABIES

This function is to comfort your baby when needed.

• Pressto enter menu page. Choose to enter the interface.
• Use the v, A button to select the lullaby you want. Choose Play All to play the lullabies in a loop.

ZOOM

This function is to Zoom in/out images to facilitate the observation of the baby’s life details.

• Pressto enter menu page. Choose Center the interface

• Select 1.5x or 2x you want. Press OK to confirm.

SETTING

This function is to set Night Vision Mode, Anti-Screen Flicker, Default Settings, and provide service support information.

Night Vision Mode

• Pressto enter menu page. Choose  to enter the interface
• Select the camera you want to turn on/off the Night Vision function.

Anti-Screen Flicker Flicker

• Select and confirm Anti-Screen Flicker. Press OK to enter the interface.
• A power supply frequency of 50Hz or 60Hz can be selected.

Note: Generally 60Hz is selected in the United States, Japan, and other countries. In this way, the picture will not flicker because of the interference of the power frequency. It’s usually 50Hz in Europe.

Default Settings

• Select and confirm Default Settings. Press OK to enter the interface.

• Confirm YES to reset. Press or confirm NO to exit.

Temperature Unit

• Select and confirm Temperature Unit. Press OK to enter the interface.
• Choose °F or °C you want and press OK.

About

Select About to enter the interface.

Connect With Us

Select Connect With Us to enter the interface.

FAQ

Q1. The monitor will alarm when the network is disconnected

• The monitor will alarm for 1 minute when the network is disconnected. It will alarm again after every 5 minutes, and so on lasts for 30 minutes, and will automatically turn off.
• You can press the Menu button to turn off the alarm directly.

Q2. The monitor failed to connect to the camera

Please check whether the distance between the camera and the monitor is within the proper range Please try to move to a shorter distance and try to pair again.

Q3.Why is the live video so blurry?

Please check and make sure there is no obstacle to the lens of the camera.

Q4. Noise on the monitor

The camera is too close to the monitor. Please put them further apart.

Q5. Can I hear my baby when I turn off the screen?

Yes. Please turn on the function of sound monitoring on the monitor. It will wake up the screen and have a beep alarm prompt If the camera detects that the baby’s voice exceeds the set value.

Q6. Why is there always the temperature alarm sound and icon prompt?

Please check the temperature of the baby’s room in time. If the temperature is abnormal, please timely adjust the temperature of the baby’s room to avoid interfering with your baby’s normal rest.

Q7. Why are the pictures black and white ?

The Night Vision Mode will be activated if the camera worked in a dark scene (less than 7-10lux).

Q8. Why don’t you see images at night?

Please check the Night Vision mode setting of the monitor. Please confirm the Night Vision Mode is ON.

Q9. How long will the monitor stand by with the screen on?

The monitor can last 4 hours, and the time of endurance varies depending on the brightness. Please select the monitor brightness to the appropriate brightness.It can increase the working time of the battery.

SPECIFICATION

| Item| Spec
---|---|---
No.| Camera|
| Image Sensor| 1/4-inch CMOS
2| Resolution| 1280x720P
3| FOV Angle| 70′
4| The Vertical Angle(Motor)| 70 degree
5| The Horizontal Angle(Motor)| 355 degree
6| IR Distance| 5M
7| Night Vision| ) 5LUX(IR OFF)
8| Video Resolution| 1280x720P/25fps
9| Video Bitrate| 32kbps-8Mbps
10| Audio Encode| PCM
11| Audio Transmission| 2-way audio
12| Alarm Mode| Voice Detection
13| Voice Sensitivity| 49dbm
14| Wireless Transmission| 2.4GHz FHSS
15| Transmission Distance| 900ft
16| Connector| DC interface
17| Adaptor| DC 5V/1.5A
18| Working Power| 600ma
19| Temperature Sensor| External
20| Dimension| 81.2x72x123mm
21| Weight| 189g(Adaptor not included)
22| Working Temperature| 0’C-50’C
23| Working Humidity| 20%-80%
No.| Monitor|
---|---|---
| Screen Dimension| 5inch
2| Screen Resolution| 1280*720P
3| Video-Input| Single-channel(720 P reso l ution)

M u ltip l e channels (VGA r eso l ut i on)

4| Audio Input| Mic
5| Power Adaptor| DC 5V/1.5A
6| Built-in polymer lithium battery| 2100mah/3.?V
7| Dimension| 164x90x18.85mm
8| Weight| 176g(Adaptor not included)
9| Working Temperature| -10°C-50°C
10| Working Humidity| 20%-80%

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.  The device has been evaluated to meet the general RF exposure requirements. The distance between the user and products should be no less than 20cm.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>