SINKOLOGY SDT901-PCV Quick-Fit Bathtub Rough-In Drop-In Kit Solid Brass and PVC Instruction Manual

June 3, 2024
SINKOLOGY

SINKOLOGY SDT901-PCV Quick-Fit Bathtub Rough-In Drop-In Kit Solid Brass and PVC Instruction Manual
SINKOLOGY SDT901-PCV Quick-Fit Bathtub Rough-In Drop-In Kit Solid Brass
and PVC

Instructions

  1. Drill a 4´´ hole in your wooden subfloor.
    Inductions

  2. Measure the distance from the inside of the P-trap to the top of the floor. (P-Trap not included)

  3. Cut the ABS or PVC 1 ½´´ pipe 3´´ shorter than the distance between the floor and the P-trap

  4. Apply glue to the outside of the ABS or PVC 1 ½´´ pipe and to the inside of the P-trap.
    Insert the pipe into the P-trap.
    Inductions

  5. Apply glue to the outside of the ABS or PVC 1 ½´´ pipe and to the inside of the Drop-In drain insert.
    Inductions

  6. Slide the Drop-In Drain on the ABS or PVC 1 ½´´ pipe making sure it sits flat on the floor.
    *Please refer to local acceptable plumbing code in regards to use of protective membrane/ underlayment.
    Inductions

  7. Insert the Drop-In Drain cap firmly into the Drop-In Drain.
    Inductions

  8. Secure the Drop-In Drain to the subfloor with screws or cement.

  9. Install your flooring surface around the opening of the Drop-In Drain.

  10. Remove the Drop-In Drain cap with a channel lock plyer.

  11. Apply provided lubricant inside the Drop-In Drain
    Please only proceed with this step once the pressure test has been performed, if needed.

  12. Affix the appropriate tailpiece to the waste & overflow.
    Ensure the measurement between the base of the Drop-In Drain and the P-trap will accomodate the tailpiece.
    **Warning : Do not cut the brass tailpiece as this may cause leakage.

**

  1. Apply provided lubricant halfway up the tailpiece and position the bathtub and tailpiece in line with the Drop-In Drain.
    Inductions

  2. With caution, slowly insert the bathtub tailpiece into the Drop-In Drain.

Please refer to local acceptable plumbing code for installation.

Documents / Resources

| SINKOLOGY SDT901-PCV Quick-Fit Bathtub Rough-In Drop-In Kit Solid Brass and PVC [pdf] Instruction Manual
SDT901-PCV Quick-Fit Bathtub Rough-In Drop-In Kit Solid Brass and PVC, SDT901-PCV, Quick-Fit Bathtub Rough-In Drop-In Kit Solid Brass and PVC, Quick- Fit Bathtub Rough-In Drop-In Kit, Bathtub Rough-In Drop-In Kit, Drop-In Kit
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals