Ets Georges Renault SCAN2D-AE Barcode Reader Instruction Manual

It’s Georges Renault SCAN2D-AE Barcode Reader

Printed Matter No. 6159990230 Issue No. 01

Date 05/2022

Page 1 / xxx

Barcode reader accessory for Desoutter

EPBC / BLRTC / EAD/ EID / EABC-elink tool range

Safety Information

• contact your local sales representative.
• Download the latest version of this document at www.desouttertools.com/?s=6159990230

Product description

TECHNICAL DATA

INSTALLATION

for EPB / BLRTC025-2350- / BLRTC045-3990-10S Tools

for EAD / EID Tools : Contact your local sales representative.

for EABC-eLINK Tools

DIMENSIONING (mm)

BARCODE READER FOR EPB/BLRT tools :

OPERATING MODE
LEDS COLOR CODE

Technical data

• Voltage
  5 V

• Power consumption :
  Max. 15 W

Weight

SCAN2D-P|  | 0.150 Kg / 0.xx lb|
---|---|---|---
SCAN2D-A| 0.1XX Kg / 0.22 lb
SCAN2D-AE| 0.1XX Kg / 0.22 lb

• Storage and use conditions
• Storage temperature -40 to +70 °C (-40 to +158 F)
• Operating temperature 0 to 45 °C (32 to 140 F)
• Storage humidity 0-95 % RH (non-condensing at 60°C)
• Usable in Pollution degree 2 environment
• Altitude up to 2000 m (6562 feet) Operating humidity 0-95 % RH (non-condensing)
• Indoor use only

Declarations

EU DECLARATION OF CONFORMITY

We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint-Herblain, France, declare under our sole responsibility that the product (with name, type and serial number, see front page) is in conformity with the following Directive(s): 2006/42/EC, 2014/30/EU, 2011/65/EU, 2014/53/EU

Harmonized standards applied:EMC

• EN 55032:2012/AC :2013 (Class B)
• EN 55032:2015/AC :2016 (Class B)
• EN 55024:2010
• EN 55024:2010/A1 :2015

Safety

• EN 62368-1 :2014/AC :2015

RoHs

• EN 50581 :2012
• EN IEC 63000 :2018
• Country of origin : France
• Authorities can request relevant technical information from:
• Pascal ROUSSY, R&D Manager, 38 rue Bobby Sands,
• 44818 Saint Herblain, France
• Saint-Herblain, 30/05/2022

Products with the symbol of a crossed out wheelie bin with a single black line underneath, indicates that parts within the product must be handled in compliance with the WEEE Directive. The entire product, or the WEEE
parts, can be sent to your “Customer Centre” for handling.Information Regarding Article 33 in REACHThe European Regulation (EU) No. 1907/2006 on Registration, Evaluation, Authorization and estriction of Chemicals (REACH) defines among other things requirements related to communication in the supply chain. The information requirement applies also to products containing so called Substances of Very High Concern (the “Candidate List”). On 27 June 2018 lead metal (CAS nr 7439-92-
was added to the Candidate List.
In accordance with the above this is to inform you that certain electrical and mechanical components in the product may contain lead metal. This is in compliance with current substance restriction legislation and based on legit exemptions in the RoHS Directive (2011/65/EU). Lead metal will not leak or mutate from the product during normal use and the concentration of lead metal in the complete product is well below the applicable threshold limit. Please consider local requirements on the disposal of lead at product end of life.

Regional Requirements

WARNING
This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov

FCC compliance

This device complies with Part 15 of the FCC Rules. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Responsible party:
Name: Mark Johnson
Position: General Manager
Address: Chicago Pneumatic Tool Company
LLC 1815 Clubhouse Road Rock Hill
SC 29730
USA
Mobile: +1 800 624 4735
Email: mark.johnson@desouttertools.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC compliance Class B
CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesiredoperation of the device.

References

• Technical Documentation for Industrial Tools - Desoutter Industrial Tools
• Desoutter Industrial Tools - Industrial Pneumatic Tool for Aeronautics & Automotive
• Search results for 6159990230
• P65Warnings.ca.gov
• Safety Data Sheets MSDS/SDS - Desoutter Industrial Tools
• Technical Documentation for Industrial Tools - Desoutter Industrial Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>