MINUSWIRE MW-1000Pro True Wireless Stereo Earbuds User Guide

MINUSWIRE MW-1000Pro True Wireless Stereo Earbuds

PACKAGE CONTENTS

1. MINUSWIRE True Wireless Stereo Earbuds (MW-1000Pro)
2. 6 x Ear Tips (two are equipped on the earbuds)
3. 1 x USB Charging Cable
4. 1 x User Manual
5. 1 x Quick Start Guide

PRODUCT DIAGRAM

1. Charging Contacts
2. USB-C Charging Port
3. Charging Slot
4. Charging Indicators
5. Touch Sensor area
6. LED Indicator
7. Charging Case
8. Microphone

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.

Hearing Safety

• Do not wear earbuds with high volume for a long time to avoid damaging your hearing.
• Set the earbuds to the low volume before you put them on, then increase the volume gradually as per your preference.
• Do not set the volume too high to stay aware of your surroundings.
• Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
• For your safety, avoid distractions from music or phone calls when you are driving or doing other activities with potential dangers.

Warning: Please set the volume to the proper level to avoid hearing damages.

Caution

• Do not expose this product to high temperatures.
• Do not immerse the earbuds into water or expose them to humidity for a long time.
• Do not clean the product with detergent containing alcohol, ammonia, benzene, or abrasives.
• Avoid dropping.
• Place the earbuds back into the charging case when not in use and keep them away from children and pets to avoid choking hazards.
• Unauthorized disassembly of any parts of this product is forbidden, which may cause fire hazard, warranty avoidance, and/or property loss.
• Close attention is needed when using near children.
• Keep the charging case away from water, rain, or any other liquid.
• Don’t use the product in thunderstorms to avoid malfunction or electric shock.
• Always ask a professional technician or authorized personnel for repair.

This product contains lithium battery. Never expose it to excessive heat such as direct sunlight or fire to avoid explosion.

HOW TO WEAR

Choose the Right Tips (Fig. 3)
Ear tips with different sizes are included in the package, try all sizes and choose the ones fitting you best.

Wear the Earbuds (Fig. 4)
Please wear the earbuds as shown below.

Bluetooth Caution

• When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference.
• When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.

USING YOUR EARBUDS

Charging

Charging the Earbuds

1. Put the earbuds into the charging case as per the L (left) and R (right) marks (Fig. 5).
2. Cover the lid and charging will start automatically (Fig. 6).

Note:

• Please fully charge the earbuds when using them for the first time.
• When the battery is low, a “Please Charge” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
• Charge the earbuds at least once every 3 months when not used for a long time.

Charging the Charging Case

1. Connect the charging port with any USB charging adapter or active computer USB port (Fig. 7).
2. The four-step charging bar will light up progressively.

Note: Unplug the charging cable (timely) when fully charged.

Power On (Fig. 8)
Uncover the lid and take out the earbuds and they will power on automatically.

Power Off (Fig. 9)
Put the earbuds into the charging case and they will turn off automatically .

Pairing

• You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 5 minutes, they will turn off automatically.

Couple Earbuds Mode

1. Uncover the lid and take out the earbuds to turn on the earbuds, they will connect with each other automatically. Once connected, The LED indicators on both earbuds will flash white indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby devices. Find “MW-1000Pro” in the searching results, tap on the name to connect.
3. Once connected, the LED indicators on both earbuds be turned off.

Note:

• If the earbuds failed to pair with each other, please disconnect the Bluetooth connection with your device, put them back into the charging case, close the lid then open it and take out the earbuds to pair again.
• It is not recommended to wear the two earbuds on different people. If needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple earbuds mode.

Single Earbud Mode

1. Take out one earbud from the charging case, and make sure the other one is placed in the charging case.
2. It will try to pair with the last paired device first then enter pairing mode with its LED indicator flashing white if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby devices. Find “MW-1000Pro” in the searching results, tap on the name to connect.
4. Once connected, the LED indicator will be turned off.

Note:

• If you want to change to couple mode, simply take out the other earbud from the charging case, they will pair with each other automatically.
• If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or clear “MW-1000Pro” from its Bluetooth list.

OPERATION AND FUNCTIONS

Answer Phone Call

| Press the touch sensor area on either of the earbuds once

Hang up Phone Call

| Press the touch sensor area on either of the earbuds 2 times

Reject Incoming Call

| Long press the touch sensor area on either of the earbuds for 2 seconds

Previous Track

| Press the touch sensor area on the left earbud 2 times

Next Track

| Press the touch sensor area on the right earbud 2 times

Play / Pause

| Press the touch sensor area on either of the earbuds once

Activate Siri / Google Assistant

| When the earbuds are paired with your device successfully, press and hold for 2 seconds the touch sensor area (left / right earphone)

CLEANING AND MAINTENANCE

1. Clean the earbuds and the charging case on a regular basis.

2. Use a dry and soft cotton cloth to wipe the unit.
   Note: Do not insert anything into the product.

3. Keep away from sharp objects to avoid scratches.

4. Put the unit in a dry and shady place if it is to be idle for a long time.

5. Do not clean the product with detergent or chemicals.

TROUBLESHOOTING

2

| ****

Failed to charge the earbuds

| • Place the earbuds into the charging

case properly

• Make sure the charging case is charged fully

3| Can’t charge the

charging case

| Make sure the charging cable is intact

and plugged in properly

4

| ****

Can’t find “MW-1000Pro”

in the Bluetooth device

list

| ****

The earbuds reconnected with previously paired device automatically:

• Deactivate the Bluetooth function of previously paired device or clear “MW- 1000Pro”

from its Bluetooth device list, and then

search again

5

| ****

Failed to pair the earbuds with your device

| • Turn on the device and activate its

Bluetooth function before pairing

• Bring the earbuds into pairing mode as instructed in the “Pairing” section

---|---|---

6

| ****

No sound in one of the earbuds in couple earbuds mode

| Place both earbuds back to the charging case then take them out, they will pair with each other automatically. If pairing failed, restore them back to the factory settings as instructed in the “Clear Pairing List” section

7

| ****

Poor sound quality

| • Wear the earbuds properly and keep them close to each other

• Place the connected device close to the earbuds or remove the obstacles between them

• Clear the debris on the earbuds

8

| ****

Unstable connection

| ****

• The effective distance may shorten with obstacles in the way

• Turn off other Bluetooth devices to

decrease the interference

9

| Can’t hear the other

party during a phone call

| ****

Set the volume to higher level

10

| The other party can’t hear your voice during a phone call| ****

Free the built-in microphone of any covers

11| Touch sensor area of the

earbuds is unresponsive

| Place the two earbuds into the charging case and cover the lid, disconnect the Bluetooth connection. Uncover the lid to turn on the earbuds and pair again
---|---|---

WARRANTY AND SERVICE

If any problems occur, please contact the Minuswire Customer Care Centre in your country via the contact information listed in this User Guide.

MANUFACTURER

• Dongguan Kantsang Electroacoustic Technology Co., Ltd.
• Address: No.8, Lu Yi Yi Road, Tangxia, Dongguan, China
• www.minuswire.com. Support contact: E-mail: support@minuswire.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>