Larex BB710 Auto Baby Swing User Manual
- June 3, 2024
- Larex
Table of Contents
Larex BB710 Auto Baby Swing User Manual
After-sales Service
Thank you for purchasing our products. If there is any quality problem, please contact with the distributor.
Note:
- From the purchase date, normal users can enjoy one year’s free maintenance service for the circuit board components and one year’s free maintenance service for the whole machine.
- Other consumables and accessories are not covered by the warranty.
Non-warranty Coverage:
- Improper use
- Damage caused by natural disasters and other irresistible forces
Clean & Maintenance
Clean
- Clean the base bracket and seat frame with wet cloth and a mild detergent. Dry thoroughly then. Please do not use corrosive cleaner.
- Removable and washable fabric
- Seat fabric: Clean it with wet cloth and a mild detergent, and dry it.
- Canopy. Take it off and put a little cleaner, wash it gently by hands. Rinse it with clean water, and then hang it to dry, avoiding exposure to the sun.
- Pillow. Tear the Velcro off and take the pillow off. Put a little cleaner, wash it gently by hands, and then rinse it with clean water. Hang it avoiding sun exposure.
Maintenance
- Please check this baby swing regularly. Make sure of each part is well connected and well installed. Stop using for poor connection and connect/ install it again if necessary.
- This product contains electronic components, which shall not be used in water or in a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding direct sunshine for a long time.
Troubleshooting
Fast self-inspection solution below
No. | Trouble | Solution |
---|---|---|
1 | Not energized |
- Check whether the adapter and DC cable are firmly connected. If loose, connect them firmly.
- DC cable may be damaged. Please contact customer service to replace DC cable.
2| The power lamp keeps flashing| Use matchable adapter with an output voltage
of 5V and 1A
3| Motion lock stuck| Check the motion lock. Pull it up to unlock the seat
frame.
4| Overstring/Strike| Power off and restart it again
Note: For other trouble, please contact our customer service for help. Never disassemble and repair the swing by yourself.
WARNING
FALL and STRANGULATION HAZARDS: Infants have suffered head injuries falling from swings and have strangled in straps. FALL HAZARD: Children have suffered head injuries falling from rockers.
-
ALWAYS use restraints. Adjust to fit snugly.
-
STOP using product when infant attempts to climb out (aproximately 9 months).
-
Stay near and watch baby during use,This product is not safe for sleep or unsupervised u If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
-
NEVER lift or carry baby in rocker.
-
STOP using product when baby starts trying to sit up or has reached [maximum weight not to exceed 20 lbs.], whichever comes first.
-
ALWAYS place rocker on floor.Never use on any elevated surface. SUFFOCATION HAZARD: Babies have suffocated when seats tipped over on soft surfaces.
-
NEVER use on a bed, sofa. cushion. or other soft surface. Stay near and watch child duringuse.This product is not safe for unsupervised use or unattended sleep.
FCC Compliance Statement
This device complies with Part 15 of be FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause larmful interference, and
(2) this device must accept any interference received, incuding intern that
may cause undesired operation.
Notes: This equipment has been tested and fund to compy with the limits or a Class B dig .al device, pumant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against iarmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the irstructions, may ruse harrrrul interference to mdb communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or teevision reception, whin an be determined by turning the equipment off and on, the user IS encouraged to try to correct The interference by one or more of tie -obwing measures:
- Reorient or moate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connec the equipment into an outlet on a circuit different from that to with the receiver is connected.
- Consult the dealer or an epienced radiorN tecinician or help
Cautions: claw or modifbations not epessly approved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment complies with FCC radiation evosure limits set forth for an unoonto ed environment This transrrter must not be ted or operating in conjunction with any other antenna or transmitter.
Product Introduction
Product Specification:
Product Name | Auto Baby Swing |
---|---|
Model Number | BB701 |
Input Voltage | 100-240V- |
Output Voltage | SV |
Output Current | 1A |
Frequency | 50/60Hz |
Application | Children up to a weight of 9 kg or unable to sit up unaided |
Main Material | 100% polyester fiber, aviation aluminum base bracket |
Certificate | EN12790,EN16232,ASTM F2088-22,ASTM F963-17 |
Product Features:
- Swinging from side to side, with five gears mimicking human movement.
- Protecting baby’s spine design on the basis of human engineering.
- Power supplied by safe 5V low voltage adapter.
- One-button installation and disassembly, simple and convenient to use.
- Seat cover made of environmental-friendly super soft fabric and non-textile, cozy, breathable and safe & removable and machine washable seat fabric.
- Made of aluminum alloy base with light weight and strong hardness guaranteeing safety for baby
- Controlled by touching screen or remote controller, easy to operate
- With motion lock and safety belt for protection.
- With built-in soft nature sounds & Bluetooth enabled for music.
Parts Instrurction
Make sure that all of the following parts listed are included in the box. If any part is missing, please contact us before operating. No tools are required for assembly.
- Plush toy*2
- Pillow*1
- Mosquito net with canopy*1
- Seat cover
- Remote controller
- Ada ptorl, 2 meters of USB ca blel
- Seat frame*1
- Base bracket
Motion Lock
Push the motion lock down to lock the seat frame and stop movement.
Pull the motion lock up to unlock the seat frame and the baby swing will swing again.
Remote Control
-
Power on/off
-
Time setting
-
Built-in music/Bluetooth music ‘Volume up
-
Play/pause
-
Previous song
-
Next song
-
Volume down
-
Five swing gears
12345 -
Sleep mode: press to enter sleep mode/gear 2 with timer 15 minutes
-
Stop swing: press to stop swing, and press any gear key to resume swing.
Power Supply
- DC plug can be inserted into 100-240V – 50 / 60Hz AC power supply
- Adapter output parameters: voltage is SV and current is lA.
WARNING . The power terminals must not be short-circuited.
- Do not use adapters other than those supplied with this product to power the product.
- Keep children away from working adapter.
- Check the adapter cable connection regularly
User Instruction
Button Description
-
Power On/Off Key
-
Music Play/Pause Key
-
Music Switch & Volume Up/Down Key
-
Five Swing gears
-
Timer setting,3 preset option
Button instruction
Power On/Off Key:Touch this button and the indicator light is on. Touch it again to turn the swing off.
Swing Gear Setting: Touch the button to adjust swing settings. There are five
gears of the swing.
the swinging angle is:0x-0°,1x-18°,2x-21°,3x-23°,4x-25°,5x-31°, the swing
angle will be smaller after loading
Note:1.When gear 0 under no timer setting, the gear indicator light and timer light are both on; 2.Automaticlly back to Gear 0 when inspected unusual swinging or strike by something.
Timer Setting: Touch the button 1-3 times to choose the swing time. 8/15/30minutes.
Music Play:Touch the button to play the built-in music. Touch it again to turn the sound off.
Volume Up/Down Touch the button in 1 second to play next song, Touch the button in 2-3 second to adjust the volume
Open the Bluetooth connection of the mobile phone to”BT_BABY”, and the song can be played directly after the connection is successful.
Scan the QR code to download the app, and follow the app instructions to
connect the swing
Installation
For Base Bracket
Assembling: Put the frame in the base with « » shape components aligned.
Disassembling: Pull out of the sheet metal and pull up the seat frame.
For Pillow and Seat Cover
Installation: Put the seat cover on the seat frame and fasten the snap button on the back. Attach the pillow to the top retaining ring of the seat frame and press the Velcro of the pillow.
Removing: Pull off the Velcro to detach the pillow and unfasten the snap button to remove the seat cover.
For Canopy With Toys
Installation: Attach the toys on canopy and fasten the clasps to the pipe of
the seat frame, and attach mosquito net to the bottom of the seat frame.
Dismantling: Put out of the clasps to remove the canopy.
Safety Belt Instruction
Place the baby into the swing and let his legs across both sides of the crotch support restraint, then turn the crotch support cover up. Adjust the seat belt on both sides and buckle up.
Note: Be sure to use the safety belt correctly when your baby lie on the
baby swing for the safety of your child. Buckle off when you take your baby
out of swing.
Assemble Instructions
- Press the steel clips,insert the upper seat frame into the hole of the down frame,ensure the clips bounce up,a clear “click” will be heard when correctly inserted.
- Insert left and right tube into main engine, ensure that the foot tube is aligned with the screw hole of the main engine in the bottom.
- Fix 4 screws into the foot tube.
Warning:
Guardian should take good care of your child, prohibit to play accessories and avoid to get hurt or swallow.