Typo 1684494-08 Loud and Proud Portable Speaker Instruction Manual

1684494-08 Loud and Proud Portable Speaker
Instruction Manual

Product Overview:

1. Speaker
2. Micro USB
3. Button
4. LED Indicator light
5. Hang Rope Hole
6. Microphone

Packaging Contents:

• 1 x Loud & Proud Portable Speaker
• 1 x Hang Rope
• 1 x Instruction manual

Specifications:

• Input Power: Dc 5V/0.5A
• Output Power: 3W
• Frequency: 180HZ – 16 KHZ
• Thd (Sound Harmonic Distortion) <1%
• Noise Signal: > 90db
• Parameter: 4 3W Dia. 33mm
• Battery Capacity: 3.7V / 150 MAH

Instructions for use:

Charging the Speaker

1. Insert the charging cable into the micro USB input port. Connect the USB connecter to a USB 5V power terminal. The indicator LED light will light up.
2. Once the speaker is fully charged, the LED indicator light will turn off. It will take up to 90 minutes to charge.

Connecting the speaker to your device:

1. Turn on the speaker by pressing down the center button on the speaker until the small blue light turns on and you hear a tone.
2. Turn on your device and ensure that your wireless function is turned on.
3. Search for the LOUDANDPROUDPORTABLESPEAKER in the wireless device list and click on the name to connect.
4. The speaker will automatically connect to your device and you will hear a high-pitched tone and the blue light indicator will blink slowly.

Using the Speaker

1. To answer a call, press the button on the speaker once
2. To take a picture, open your camera application on your phone. Press the button on the speaker once to trigger the shutter and take a photo.
3. To pause/play music, double-click the button on the speaker.
4. To turn the speaker off, hold down the button. You will hear a power-down tone and the speaker will be off.

Warning & Safety Instructions

• Read the manual carefully before use.
• Keep manual for future use of the product.
• It is recommended to unplug when not in use.
• When the charging cable is not in use, please ensure the power source is turned off and the charging cable is unplugged from the device.
• Do not expose to water or use/store in a damp environment
• Clean by using a soft, dry cloth
• Keep out of reach of children
• If the product becomes damaged, do not continue use and seek a professional to repair

Product Disposal

Where you see either symbol on any of our electrical products, batteries, or packaging, It indicates that the relevant electrical product or battery should not be disposed of as general household waste In Europe. To ensure the correct waste treatment of the product and batteries, please dispose of them in accordance with any applicable local laws or requirements for the disposal of electrical equipment/batteries. By disposing of batteries and electrical waste correctly, you will help to conserve natural resources and improve standards of environmental protection.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by Cotton On USA Inc may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The device compliance RF exposure requirement and can be installed and used without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>