KERCHAN CN202007 Advertising Machine Instructions
- June 5, 2024
- KERCHAN
Table of Contents
KERCHAN CN202007 Advertising Machine Instructions
Dispenser Features :
Auto Dispense: Auto Dispense by Sensor, touch free to avoid cross infection;
Power Supply: Dispenser power supplied by LCD screen.
Dispensing Life: The life of our dispenser is more than 650000 times;
Dispenser Operation:
-
Use Key to open front housing.
-
Take out white refilling bottle.
-
Un screw nozz I e by hand.
-
Filling the bottle.
-
Fitting bottle.
-
Dispensing times adjustable button ( l time and 2times)
-
Dispensing power supply connector.
-
Close the housing.
-
The longest induction distance between hand and dispenser jct nozzle is within 7cm.
Installation manual
I , Machine appearance ( DSD1500/ DSD1900
11 , Wall-hung installation method
Picture 2
G) Drilling four holes according to the size that picture two shows.
(i) Put the plastic stopper in the hole, and twist the screw well.
G>Spread the glass cement on the wall, and keep the coverage not more than the
back of advertising displayer.
© Hung the machine on the wal l, and connect the power cable well according to
picture three.
m, Installation method of using floor stand
Take down the screw on the advertising displayer showing in picture six.( for 0s01900)
- Al ign the top of the stand with the screw hole on the back of the machine.(for 0s01900)
- Fixed the machine and the stand together from the back through the screw. (for DSD1900)
- Take down the screw of the fixed ad displayer from the of the machine, and take down the ad displayer according to the picture eight. (for 0s01 soo)
- Put the fixing plate on the position that picture eight -ows, then f ix the stand and fixing plate togetlher through from the back. (for 0s01soo)
- Connect the power and fix the plate through the screw from the bottom of the machine according to picture four.
FCC STATEMENT 1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver
. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer Cr an experienced radio/TV
technician for help. FCC Radiation Exposure Statement This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>