birgus BSD400D Aroma Diffuser User Manual
- June 5, 2024
- birgus
Table of Contents
birgus BSD400D Aroma Diffuser
Safety Feature
As a safety feature, the Birgus Aroma Diffuser has an automatic low water detection system. When the diffuser detects a low water presence it will automatically shut down the device for your safety. There will always be a small amount of water left in the water reservoir tank for the safe operation of your enjoy Birgus Aroma Diffuser, we would love it if you share your eJ1 perience with others of any question problems, please contact us support@birgusai.com
DIFFUSER & ACCESSORIES
This Aroma Diffuser uses Ultrasonic Technology to atomize the water and essential oils in the water tank and produces a cool, humid, and fragrant mist.
OPERATION
-
Position the Birgus Diffuser upright, pull upwards to remove cover
-
Connect AC adaptor
-
Pour water and essential oil into Birgus Diffuser.
(DO NOT fall above the “MAX” marking 400m. DO NOT use boiling water. DO NOT fill when power is on. It is recommended to add 2-3 drops of essential oil for each 100ml of water) -
Set the cover back on the base. (Aroma Diffuser MUST NOT be operated without the cover. Do not slant Birgus Diffuser after filled water.)
-
How to power on/off?
Long press(2s) O/IO/6 can power on-off the Aroma Diffuser -
How to switch mist mode?
Press / to switch the mist to big/small / off. -
How to time the mist?
Press to timing the mist to 1H mode/3H mode /Lasting mode.
Indicator color for each mode:
Blue: 1H mode
Green: 3H mode -
How to switch light mode?
Press / to switch the light to Lasting mode/breathing mode / of.
MAINTENANCE
After using 5-6 times, or 3-5 days, please clean the product as follow
- Unplug the unit and remove the cover.
- Pour out any remaining water from the tank.
- Use a small amount of dish soap to clean. Gently wipe with a soft cloth. Use a dry towel to dry the diffuser after it is clean.
- NEVER use other acids or enzymes to clean the unit as they could react with the essential oil residue and cause harmful vapors to be released or cause a malfunction.
PRECAUTIONS
- Please read below to avoid any malfunction of the unit
- If you are not a technician do not try to dismantle the diffuser to repair it.
- Do not turn the power on when the tank is empty.
- Do not touch the atomization plate
- Clean regularly as per Maintenance instructions to avoid malfunction.
- Always unplug before maintenance.
- For hygiene reasons, after use, pour out the remaining water from the tank and wipe it with a clean dry cloth.
- Only use the measuring cup to add water into the tank, do not fill water directly from the sink.
- Do not let mist come in direct contact with furniture, clothing, walls, etc.
- Keep out of direct sunlight.
- Always keep on a hard, stable, flat surface. Do not place it on a towel, carpet, or any other unstable surface
- Keep away from electronic equipment, such as TV and Audio equipment.
- Wait 60 minutes between uses to avoid damage to the atomization place.
- Do not use sparkling water. Only use tap water or mineral water.
- Never move the product when it is working.
- Do not touch any part of the product with wet hands.
- Keep away from pets and small children.
- If the power cord is smoking or burning, unplug immediately!
TROUBLESHOOTING
Please refer to the table below in the event of the product operating abnormally:
SPECIFICATIONS
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The device has been evaluated to meet general RF exposure requirements， the device can be used in portable exposure conditions with restriction.