YEINDBOO I9S Pro Wireless Bluetooth Headset User Manual

June 5, 2024
YEINDBOO

YEINDBOO
Bluetooth headset

model: I9S PRO
User Manual

NOTE: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1.  This device may not cause harmful interference, and
  2.  this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warning:

Before using the device, read these security instructions and store them for future reference.

This device is not suitable for use by persons (including children) with physical, sensory, or mental disabilities.
Personnel who have not read this manual shall not use this device unless instructed by the personnel responsible for their safety and supervision.
This device should not be exposed to dripping or splashing water.
This device is only suitable for temperate climates.
Note: there is a risk of an explosion if the battery is replaced incorrectly or if the battery is not replaced with the same or equivalent battery.
Batteries should not be exposed to overheating places, such as the sun, fire, and so on.
If the battery wears out, it must be removed from the product.
The device is not waterproof please kept dry.
The device contains small parts that can pose a choking hazard.

Technical parameters:

Bluetooth Version:5.0
Charge DC:5 v
Frequency:20Hz-20KHz
Sensitivity:95 dB /1 kHz
Plug size: Earphone interface, Charging outlet mini USB
Range Distance:20m
Music time:2-3H
Charge time:1-2H

Accessories

Charge Cable 1
User Manual
1

Method of use

FUNCTION Operation Method LED Display
Power ON Remove the earphone from the charge box Red and blue lights

flickered alternately
Power OFF| Long press the multi-function button for 6 seconds (any left or right ear)| The red light flashes three times
Earphone pairing| The earphone is automatically pairing when removed from the charging bin
(L for the host. R for slave| Red and blue lights flickered alternately
Matching success| search ce H17T device name, click| Red and blue lights flickered alternately
Disconnect| The mobile phone disconnects Bluetooth| Red and blue lights flickered alternately
Play to suspend the music| kk the earphone multifunction button (ren Left and right ear)| Blue light every 5 seconds Flash
Back to dial
the telephone| Double-click the earphone multifunction button (ren Left and right ear)| Blue light every 5 seconds Flash
Switch song| Long press the L headset for 2 seconds to play the next song.
Long press the R headset| Blue light every 5 seconds Flash
Answering calls| tia the ealpiione I t
multifunction button to connect Listen for incoming calls (either ear)| Blue light every 5 seconds Flash
Decline a call| Long press the multifunction button for  1.5 seconds
To reject| Blue light every 5 seconds
Rash
---|---|---
Low battery
of earphone| earphone battery lower than 3.2v ear
Automatic shutdown| The red light flashed three times
Battery LED state| The red light flashes when the battery compartment
Full of electricity, the red light is always on
Charge the earphones State
electricity| Put the earphone into the charging bin and charge automatically
On. full charged, light off

CHARGE INDICATION

Connect the USB charging cable to the USB port and the micro USB plug to the device charging port. Red leds light up when the device is charged. The headset will Will shut down. When the charge box is fully charged, the red LED light comes on.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals