GE imagination GU10 Precision Colours Bulb User Guide

GE imagination GU10 Precision Colours Bulb

Seamless Setup

1. Plug in your Google Nest device ( smart speaker)
2. In the same room, fit the bulb and turn on the light. The light will start blinking and waiting to be added in Google Home App.

• Download the Google Homem App and follow the prompts to easily set up

• Set up smart light tap

• Pick smart light to set up

• Select smart light and tap Set up

• Choose room and tap Next

Create a unique name and tap Next

• Your Light is now ready and tap Done

Now your light and room is on App and ready to be controlled

Control your light, power On & Off, dim your light Down & Up, change colors

Control your lights with your voice

• Support your circadian rhythm sleep / wake cycle
• Control your lights with your voice
• Set up Routines for your lights
• Create ambience in your home
• “Hey Google, turn on the light”

Explore Google Home App with Routines

Troubleshooting

• Problem: If there’s no blinking from the light after powering on.
• Solution: Please follow below Factory Reset process.

Turn power On & Off 5 times then leave it on, each time using light switch:

1. On & Off,
2. On & Off,
3. On & Off,
4. On & Off,
5. On & Off, then On again

the light should now start to blink

• After performing the above On & Off-cycle, if the light does not blink, please redo the above On & Off-cycle ( factory reset ) again.

Confirm the light blinks and go to step

• Problem: The light can be added successfully, but cannot be controlled.
• Solution: Please follow below to reboot the Google Home.
• Tap the …… to reboot.

This GE imagine connected smart home LED bulb features and controls are performed via the App or Voice only

• Brightness or dimming controls can only be performed via the App or Voice as outlined in the quick start guide supplied with your bulb.
• Note: This smart LED bulb is not compatible with the use of any external dimmer.
• Use in Dry Locations only Australian / New Zealand Regulatory Compliance Mark and Responsible supplier number E6

GE is a trademark of General Electric Company and is under license by Light Source Solutions and Light Source Solutions New Zealand Ltd. of 140 Fulton Drive Derrimut Vic 3026 Australia.

• Thank you for choosing GE to imagine.
• Enjoy your new smart lighting experience

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>