ZOPEC MEDICAL 20ZDPO2 Universal Rechargeable CPAP Battery User Manual

: June 5, 2024
: ZOPEC MEDICAL

Table of Contents

IMPORTANT – BEFORE FIRST USE
PRODUCT CONTENT
PRODUCT DIAGRAM
PRODUCT SPECIFICATIONS
INSTRUCTION FOR USE
CPAP Run Time: (Not using a humidifier and heated tube. BiPap time around
Warning
Troubleshooting
Contact Us: Below is our contact information:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEDICAL 20ZDPO2 Universal Rechargeable CPAP Battery

User Manual

ZOPEC MEDICAL 20ZDPO2 Universal Rechargeable CPAP
Battery

IMPORTANT – BEFORE FIRST USE

Initial Charge: Please charge Zopec Voyage CPAP battery (~4 hours) until 100% charged (Top 4 LED lights) before first use. (AC Switch must be OFF. No LED light.)
Humidifier and Heated Tube Impact on CPAP Running Time:
a. Longest Running Time: NOT using heated Humidifier and heated Tube.
b. Shortest Running Time: Using both a heated humidifier and heated tube will reduce about 75% of the CPAP running time.
c. Humidifier: With a heated humidifier ON, it will reduce CPAP running time by about 50%. It takes a lot of power to evaporate water.
d. Heated Tube: With a heated tube ON, it will reduce CPAP running time by an additional 50%. It takes a lot of power to heat up a 6 feet tubing. We recommend turning the heated tube OFF when running on the CPAP battery.
Instruction for Turning Off the Humidifier and Heated Tube:
a. ResMed AirSense10:
i. Go to “options” and change “ClimateControl” to “Manual”. NOTE: this must be done first. Otherwise, the automatic climate control will turn the humidifier and heated tube back on without notice.
ii. Next, turn “Humidity Level” and “Tube Temp” to “OFF”. If you don’t have a heated tube, just turn “Humidity Level” to “OFF”.
iii. Exit “MyOptions” and re-enter “MyOptions” to verify that “Climate Control” is in “Manual” and “Humidity Level” and “Tube Temp” are “OFF”.
b. Philips DreamStation, detach the humidifier and plug the CPAP hose directly to the back of the CPAP Unit.
c. All Other Brands, detach the humidifier if possible and just run the CPAP unit. Please call or email us if you don’t know how to turn off the heated humidifier and/or heated tube.
Determine Exact CPAP Run Time: Test the run time with your exact settings first before sleeping with it. At the end of the CPAP hose, remove the mask and put a paper towel inside the CPAP hose. Turn the machine on and just let a little air through.
This imitates breathing. Simply run the CPAP with a fully charged battery during the day and record the run time.
Contact Us: We are here to help! Below is our contact information:
• Zopec Medical Website: www.zopec.com
• Email: info@zopec.com
• Phone: Please see our website “Contact Us” for the current phone numbers.

PRODUCT CONTENT

Zope Voyage Universal Rechargeable CPAP Battery
Fast USB-C PD 39W Wall Charger
Travel Pouch

PRODUCT DIAGRAM

ZOPEC MEDICAL 20ZDPO2 Universal Rechargeable CPAP Battery -
diagram

Safety Cover
AC Outlet
AC Switch On/Off (press and hold to turn On/Off. LED lights when it is On)
USB Type-C PD 45W port (input and output)
USB ports (2)
Battery Switch On/Off (press and hold to see battery capacity)

PRODUCT SPECIFICATIONS

Battery Model	20ZDP02
Dimensions (L x W x H)	7.25″ x 5.0″ x 1.75″ (in)
Weight	2.0 lb
Capacity	40,200 mAh / 146 Wh
AC Output	110V/ 60 Hz/ 100W
Working Temperature	32 – 115°F (0 – 45°C)
USB-C PD 45W Output	39W Rated (45W Max). (5V/3A, 9V/3A,

INSTRUCTION FOR USE

Before first use, please charge the battery to 100%. (4 LED lights). To charge, plug the wall charger into the wall outlet and connect to the Type-C Port on the battery.
Note: AC Outlet switch must be OFF when charging the battery.
To use the battery, open the safety cover.
Press and hold the AC Outlet Switch to turn on the AC Outlet (LED lights up).
The LED lights will show the capacity remaining.
Plug in your device and the device should turn on and be ready for use.
After use, just press and hold the AC Outlet Switch to turn off (LED turns off).

CPAP Run Time: (Not using a humidifier and heated tube. BiPap time around

10 – 20% less)

CPAP Brand| CPAP Model| Pressure
(cm H2O)| Heated Humidifier
/ Heated Tube| Machine Run
Time (Hours)
---|---|---|---|---
Philips Respironics| DreamStation| 10| Both OFF| 14
15| Both OFF| 10
DreamStation Go| 10| Both OFF| 12
15| Both OFF| 9
ResMed| AirSense 10| 10| Both OFF| 12
15| Both OFF| 9
AirMini| 10| Both OFF| 14
15| Both OFF| 10
Breas HDM| Z1 / Z2| 10| Both OFF| 16
Somnetics| Transcend| 10| Both OFF| 14

Warning

Do not drop the product
Keep the product dry and away from liquid
Keep product away from flammable and explosive materials
Use only the Power Outlet 2 wall charger for charging
Do not disassemble the battery
Do not use the device beyond the operating temperatures
Follow the local regulations when disposing of the battery
For battery maintenance, please charge at least once every 3 months

Troubleshooting

Battery Will Not Charge: Battery will not charge when the AC Outlet is On.
Please turn off the AC Outlet and try again.
Battery Run Time Not Lasting as Long: Please make sure to follow the instructions in this manual to turn off the heated humidifier and heated tube then try again. If you have a ResMed CPAP machine, most likely the automatic ClimateControl turned the heated humidifier and heated tube back on without you knowing. Please make sure the Climate Control is in “Manual” before turning the humidifier and heated tube to OFF, then try again.
No Power to Outlet: Please contact your vendor or us for further assistance.
Device Will Not Run and All 4 LED Lights Flashing: Please make sure that the device you are plugging in is below 100 W. All CPAP machines are 90W or below. You can see the rating on the AC Adaptor. If it is, please unplug your device and try again.

If the problem persists, please contact your vendor or us for further assistance