DS18 VMT1 Voltmeter Instructions
- June 5, 2024
- DS18
Table of Contents
DS18 VMT1 Voltmeter
VOLTMETER
INSTRUCTIONS
- (+) POSITIVE: Connect this to the battery to be monitored directly to the positive post.
- Remote Input: Use “REM-IN” to Connect the remote signal from the Head Unit to turn on the VMT1.
- (-) NEGATIVE: Connect this to the battery to be monitored directly to the negative post. To get a more accurate reading of the battery, we recommend not using a chassis ground.
- Remote Output: When the “REM-IN” input is detected from the Head Unit the VMT1 will turn-on the “REM-OUT”.
VOLTAGE PROTECTION
- Low Voltage: When the voltage drops to 9.4V the “REM-OUT” will turn-off, if the voltage comes back to 11V or more, the “REM-OUT” will back turn-on.
- VOLTAGE RANGE: 5 ~ 20 Volts
WARRANTY
Please visit our website DS18.COM for more information on our warranty policy.
We reserve the right to change products and specifications at any time without
notice. Images may or may not included optional equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>