Electrolux EDI1004 1300W EasyLine Dry Iron Instructions

: June 5, 2024
: Electrolux

Table of Contents

Electrolux EDI1004 1300W EasyLine Dry Iron
Components
Cleaning and care
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Electrolux EDI1004 1300W EasyLine Dry Iron

Components

Power cord protector
Handle
Button-guard
Temperature selector
Soleplate*
Power indicator light

Read the following instructions carefully before using the product for the first time.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance may only be connected to a power supply where voltage and frequency comply with the specifications on the rating plate.

Getting started

Before first use. Remove all adhesive remains and gently rub with a dampened cloth. When turned on for the first time, temporary odours may occur
Plug power cable into a power outlet Power indicator light turns on. Set temperature by turning temperature selector to adequate choice. When the light turns off, iron is ready to be used.
Keep the iron always in vertical position when you are not using it.

Ironing chart

Fabric	Temperature setting	Ironing recommendation

Acrylic, Acetate, Nylon,

Synthetics, Rayon, Viscose

| | Iron on reverse side while still damp or use spray to dampen.
Silk, Cotton blends, Wool & wool blends| | Iron on reverse side. Use an ironing cloth to prevent shine marks. Check label and follow manufacturer’s instructions. For blends, use setting for the

fibre requiring lowest setting.

Cotton, Corduroy, Linen,

Denim

| | Iron while still damp or use spray to dampen. Use ironing cloth to prevent

shine marks, especially with dark colours.

Cleaning and care

Always store iron on its heel rest. To clean exterior surfaces, use a damp soft cloth and wipe dry. D not use any chemical solvents, a these will damage the surface.
Cleaning the soleplate. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. To remove burnt residue, iron over a dam cloth while iron is still hot. To clean the soleplate, simply wipe with soft damp cloth and wipe dry

Troubleshooting

Disposal

Packaging materials The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,

PS<, etc. Please dispose the packaging materials in the appropriate container at the community waste disposal facilities.

Old appliance

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.